Epson B813162 Manuel d'utilisation
Using Optional Equipment Page 40
4Using the Auto Document Feeder - B813162
The auto document feeder (part number B813162) automatically loads
multiple-page documents into your scanner. It is particularly useful for
OCR (optical character recognition) scanning or for creating an image
database. Follow the steps in these sections to install and use the ADF:
◗Unpacking the Auto Document Feeder
◗Installing the Auto Document Feeder
◗Loading Paper in the Auto Document Feeder
◗Fixing Paper Jams in the Auto Document Feeder
If you have the Artist
or Professional
model and are using
LaserSoft SilverFast
4.0, you’ll find the
electronic manual for
that scanner
software on the
LaserSoft SilverFast
CD-ROM.
Using Optional Equipment Page 41
Un
p
ackin
g
the Auto Document Feeder
Make sure that the following items are included in the ADF box. Contact
your EPSON dealer if anything is missing or damaged.
installation
screws
auto document feeder
Using Optional Equipment Page 42
Installin
g
the Auto Document Feeder
Before installing the ADF, be aware that:
◗The ADF is large, so clear a wide space around the scanner before
unpacking and installing it.
◗Don’t remove the protective foam block from the ADF’s mounting
hardware until you’ve finished installing it.
Follow the steps below to install the ADF on your scanner:
1Turn your scanner off and unplug the cables and power cord.
2Remove the document cover by grasping the back of the document
cover as shown and easing the cover up.
To use the ADF, you
must install EPSON
TWAIN Pro.
LaserSoft SilverFast
Lite does not support
the ADF.
Using Optional Equipment Page 43
3Position the ADF’s mounting slots over the two mounting screws
located at the back of the scanner. Slide the ADF forward slightly until
the two holes in front of these slots are aligned with the screw holes at
the back of the scanner.
position the ADF’s
mounting slots over
the two large screws
on the scanner
line up these holes
with the screw holes
on the scanner
screw holes
on scanner
Do not remove the
protective foam
block until you’ve
finished tightening
theADF’sinstallation
screws (see step 4.)
Using Optional Equipment Page 44
4Insert the two installation screws that came with the ADF into the
screw holes, then tighten the screws with a coin.
5Remove the protective foam block from the ADF’s mounting hardware
and gently close the ADF.
foam block
install the screws
in the screw holes
Using Optional Equipment Page 45
6Attach the ADF’s connector to the scanner’s option interface. Secure
the connection by tightening the connector screws.
7Reattach all the scanner cables and turn on the scanner.
012
3
4
5
6
7
SCSI
ID
OPTION TERMINATOR
SW
LOCK
UNLOCK
ON
OFF
OPTION
Using Optional Equipment Page 46
Loadin
g
Pa
p
er in the Auto Document Feeder
The ADF can hold up to 30 sheets of the following paper sizes, based on
a paper weight of 17 lb and a thickness of 0.2 inch (6.0 mm) or less:
Before loading the ADF, make sure the document:
◗Has no wet ink on it.
◗Has no holes and is not ripped or wrinkled.
◗Has no staples or other objects attached that may damage the feeder.
◗Has no folds.
◗Is not a multipart form.
◗Is not bound.
◗Is not printed on photo quality or glossy paper.
◗Has no carbon coating.
◗Has no cut-out areas.
Checks: 3 ×5 inches (76 ×127 mm)
B5: 7.17 ×10.1 inches (182 ×257 mm)
A4: 8.27 ×11.69 inches (210 ×297 mm)
Letter: 8.5 ×11 inches (215.9 ×279.4 mm)
Legal: 8.5 ×14 inches (215.9 ×355.6 mm)
Do not feed
photographic sheets
or valuable original
artwork into the ADF;
misfeeding may result
in accidental wrinkling
or damage to your
original.
Also,photoqualityand
glossy paper are too
thick to feed into the
ADF successfully.
Using Optional Equipment Page 47
Follow the steps below to load paper in the ADF:
1Slide the edge guides all the way out.
2Arrange your stack of originals face up, with the page you want to scan
first on the top. Insert the paper stack into the ADF until it meets
resistance. Make sure that the side you want to scan is facing up.
For checks, move the
left edge guide
toward the center
until it stops, then
place your checks in
the tray. Move the
right edge guide flush
against the checks.
Using Optional Equipment Page 48
3Slide the edge guides to the edges of your paper.
4Follow the steps in your electronic
EPSON TWAIN Pro User’s Guide
to
scan your document.
Loading documents manually
You can load documents manually while the ADF is installed. Lift the ADF
and place the document on the document table. Then close the ADF and
scan the document as described in your electronic
EPSON TWAIN Pro
User’s Guide
(located in the Manuals folder on your EPSON Expresssion
800 Scanning Tools CD-ROM.)
When scanning
high-quality color or
halftone documents,
it is best to open
the ADF and scan
documents as
described in Loading
documents manually.
Don’t open the ADF
while scanning. You’ll
get an option error
and possibly a paper
feeding error.
Using Optional Equipment Page 49
Fixin
g
Pa
p
er Jams in the Auto Document Feeder
If there is a paper jam, open the ADF’s cover to see where the paper jam
occurred. Pull the jam-release lever forward and slowly pull the jammed
paper out of the feeder mechanism.
After removing the jammed paper, close the ADF cover and reset the
scanner by turning it off and on again or pressing the RESET button.
Be careful not to pull
too hard on the paper.
It may tear, making it
more difficult to
remove.
pull forward on the
jam-release lever to
release the paper
Table des matières
Autres manuels Epson Accessoires pour scanner
Epson
Epson B813112 Manuel d'utilisation
Epson
Epson B813182 Manuel utilisateur
Epson
Epson B12B808411 Manuel utilisateur
Epson
Epson B813152 Manuel d'utilisation
Epson
Epson ES-1200C Pro PC Manuel utilisateur
Epson
Epson 1640XL - Expression Graphic Arts Manuel utilisateur
Epson
Epson GT-10000 Manuel utilisateur
Epson
Epson B813102 Instructions d'installation et d'utilisation
Manuels Accessoires pour scanner populaires d'autres marques
HP
HP Scanjet 5370C Series Mode d’emploi
imacon
imacon Flextight Damaged Original Kit Manuel utilisateur
ARS-Imago
ARS-Imago POLAROID SCAN MASK Manuel utilisateur
Datalogic
Datalogic GFC-2 00 Series Manuel utilisateur
Colortrac
Colortrac MK4 UNIVERSAL REPRO STAND Manuel utilisateur
Newland
Newland EM3080-W Guide de configuration rapide
