Epson U325 - TM B/W Dot-matrix Printer Manuel utilisateur

TM-U325D/U325PD

User’s Manual

400665707

RECEIPT

OUTVALIDA

TION

POWER

ERROR

FEED

RELEASE

EPSON

Printer Parts and Labels

Labels

CAUTION/ VORSICHT:

Print head cover and print head are hot.

Druckkopfabdeckung und Druckkopf sind heiß.

CAUTION/ VORSICHT:

Caution label for drawer kick-out connector.

Vorsichtsetikett für Schnappsteckerbuchse.

EPSON/U325 Printer - File: PRNTR_8.

W. Swanlund REV> 14Octobe

14 25

RECEIPT

OUTVALIDA

TION

POWER

ERROR

FEED

RELEASE

EPSON

Control panel

Printer cover

On/Off switch

RECEIPT

OUT VALIDATION

POWERERROR

FEED RELEASE

Control panel

Serial interface connector

Parallel interface connector

CUT

SET

CLOSE THE

PRINTER COVER

or transmitted in any form or by any means, electronic, mechanical, photocopying, recording,

or otherwise, without the prior written permission of Seiko Epson Corporation. No patent

liability is assumed with respect to the use of the information contained herein. While every

precaution has been taken in the preparation of this book, Seiko Epson Corporation assumes no

responsibility for errors or omissions. Neither is any liability assumed for damages resulting

from the use of the information contained herein.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product

or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as

a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or

alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson

Corporation’s operating and maintenance instructions.

Seiko Epson Corporation shall not be liable against any damages or problems arising from the

use of any options or any consumable products other than those designated as Original Epson

Products or Epson Approved Products by Seiko Epson Corporation.

EPSON and ESC/POS are registered trademarks of Seiko Epson Corporation in Japan and

other countries/regions.

NOTICE: The contents of this manual are subject to change without notice.

Standards and Approvals

The following standards are applied only to the printers that are so labeled. (EMC is

tested using the Epson power supplies.)

Europe: CE marking

North America: FCC/ICES-003 Class A

Oceania: AS/NZS CISPR22 Class A

WARNING

This is a Class A product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

The connection of a non-shielded printer interface cable to this printer will invalidate the

EMC standards of this device.

You are cautioned that changes or modifications not expressly approved by Seiko Epson

Corporation could void your authority to operate the equipment.

CE marking

The printer conforms to the following Directives and Norms:

Directive 2004/108/EC

EN 55022 Class A

EN 55024

IEC 61000-4-2

IEC 61000-4-3

IEC 61000-4-4

IEC 61000-4-5

IEC 61000-4-6

IEC 61000-4-11

FCC Compliance Statement for American Users

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference,

in which case the user will be required to correct the interference at his own expense.

For Canadian Users

This Class A digital apparatus complies with Canadian ICES-003.

À l'intention des utilisateurs canadiens

Cet appareil numérique de classe A est conforme à la norme canadienne NMB-003.

iii

About This Manual

Setting Up and Using

❏Chapter 1 contains information on unpacking the printer, setting it up, attaching

the paper roll near-end sensor, and setting the DIP switches.

❏Chapter 2 contains information on using the printer.

❏Chapter 3 contains troubleshooting information.

Reference

❏Chapter 4 contains specifications and character code tables.

Warnings, Cautions, and Notes

WARNING / WARNUNG:

Warnings must be followed carefully to avoid serious bodily

injury.

Warnhinweise müssen sorgfältig befolgt werden, um Unfälle

mit möglicherweise schweren Verletzungen zu vermeiden.

CAUTION / VORSICHT:

Cautions must be observed to avoid minor injury to yourself or

damage to your equipment.

Vorsichtshinweise müssen sorgfältig befolgt werden, um

Unfälle mit der Gefahr leichter Verletzungen oder Schäden

am Gerät zu vermeiden.

Note:

Notes have important information and useful tips on the operation of your

printer.

Downloading Drivers, Utilities, and Manuals

Drivers, utilities, and manuals can be downloaded from one of the

following URLs.

For customers in North America, go to the following web site:

http://www.epsonexpert.com/ and follow the on-screen

instructions.

For customers in other countries, go to the following web site:

http://www.epson-pos.com/

Introduction

Features

The TM-U325D and TM-U325PD are high-quality POS printers that can print a

multiple-line validation and on receipt paper (paper roll). The printer has the

following features:

❏Easily changeable interface specifications for serial or parallel by exchanging the

interface board.

❏Excellent reliability (long life) and good operability (drop-in paper loading).

❏Multiple-line validation printing (possible to print a maximum of 9 lines).

❏Compact and light in weight.

❏High-speed printing through logic-seeking control.

❏Excellent reliability and long life due to adoption of stepping motor, both for

moving the carriage and for paper feeding.

❏Flexible line space setting permits printing in accordance with any user-defined

format.

❏Conforms with ESC/POS®; excellent universality of control.

❏Built-in drawer kick-out interface provides capability to drive two drawers.

❏Selectable character fonts (7 ×9 and 9 ×9).

❏Semi-automatic paper loading capability.

❏AC adapter provides compact power supply.

❏Automatic status back (ASB) function that automatically transmits changes in

printer status.

Accessories

❏AC adapter

❏EPSON ribbon cassette, ERC-38

Options

❏EPSON power supply unit, PS-180

❏Printer fastening tape (Model No. DF-10)

Restriction of Use

When this product is used for applications requiring high reliability/safety, such as

transportation devices related to aviation, rail, marine, automotive, etc.; disaster

prevention devices; various safety devices, etc.; or functional/precision devices, etc.;

you should use this product only after giving consideration to including fail-safes

and redundancies into your design to maintain safety and total system reliability.

Because this product was not intended for use in applications requiring extremely

high reliability/safety, such as aerospace equipment, main communication

equipment, nuclear power control equipment, or medical equipment related to

direct medical care, etc., please make your own judgment on this product’s

suitability after a full evaluation.

Setting Up the Printer 1–1

Chapter 1

Setting Up the Printer

Unpacking

The illustration below shows the items included for the standard

specification printer.

(*1) The power cord may not be included in the package. If it is not, make sure to use a

power cord that complies with the safety standards.

If any item is damaged, please contact your dealer for assistance.

Selecting a Location

Place the printer on a surface that is as horizontal as possible. Make

sure that the printer does not tilt more than 15 degrees.

The printer should be installed so that it does not move or vibrate

during paper cutting or the drawer kick-out operation.

Fastening tape is available as an option.

Manual

RECEIPT

OUTVALIDA

TION

POWER

ERROR

FEED

RELEASE

EPSON

Printer

Power supply

Spacers for the paper roll

near-end sensor 2 pcs

Power switch cover

Ribbon cassette Paper roll

1–2 Setting Up the Printer

Adjusting the Paper Roll Near-End Sensor

Notes:

Use paper rolls with an inner core diameter of 10.5 to 12.5 mm so

that the sensor detects the remaining paper correctly.

When the last portion of a paper roll bears red markings, the

marking is sometimes an adhesive that pulls the entire paper roll up.

In this case, the sensor may not detect the remaining paper correctly.

If a paper roll easily becomes loose because of the quality of the paper

or other factors, incorrect detection of the paper end may result.

1. Make sure that the power supply is disconnected from the printer.

2. Two spacers are included. See the illustration below and decide

whether or not you want to use them. Use them if you want the

near-end sensor to be triggered when distance A is 3 to 4 mm;

otherwise it will be triggered when distance A is approximately

6mm.

3. Secure the paper roll near-end sensor (and spacers) with two

screws. When you insert the spacers, be sure you set the

spacers in the direction shown in the illustration.

Distance A

Setting Up the Printer 1–3

4. Check to be sure that the detecting lever moves freely.

Connecting the Cables and Grounding the Printer

You can connect up to three cables and a grounding wire to the

printer. They all connect to the connector panel on the bottom of

the printer, which is shown below:

Notes:

There is a caution label beside the drawer kick-out connector.

Depending on the interface installed, the interface connector on your

printer may look different from the one illustrated.

Before connecting any of the cables, make sure that both the printer

and the computer are turned off.

Spacers Paper roll

near-end sensor

Power supply

Drawer kick-out

Interface

Grounding screws

1–4 Setting Up the Printer

Connecting the Computer

1. Plug the cable into the connector on the printer and tighten the

screws on both sides of the cable connector, as shown.

2. Connect the other end of the cable to the connector on your

computer.

Connecting the Drawer

WARNING:

Use a drawer that matches the printer specification. Using an

improper drawer may damage the drawer as well as the

printer.

CAUTION:

Do not connect a telephone line to the drawer kick-out

connector; otherwise the printer and the telephone line may

be damaged.

Plug the drawer cable into the drawer kick-out connector on the

bottom of the printer next to the power supply connector.

Autres manuels pour U325 - TM B/W Dot-matrix Printer

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Epson Imprimante

Epson

Epson CX5000 - Stylus Color Inkjet Manuel utilisateur

Epson

Epson WorkForce WF-7110 Manuel utilisateur

Epson

Epson ActionLaser 1400 Manuel utilisateur

Epson

Epson WorkForce WF-3520DWF Guide de l'utilisateur

Epson

Epson Stylus 1500 Manuel utilisateur

Epson

Epson WorkForce WF-3520DWF Guide de l'utilisateur

Epson

Epson Stylus TX235W Manuel utilisateur

Epson

Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880... Manuel utilisateur

Epson

Epson DS-560 Instructions d'installation et d'entretien

Epson

Epson U590P - TM B/W Dot-matrix Printer Manuel utilisateur

Epson

Epson R2400 - Stylus Photo Color Inkjet Printer Manuel utilisateur

Epson

Epson Stylus Color 480SXU Manuel d'utilisation

Epson

Epson R340 - Stylus Photo Color Inkjet Printer Manuel utilisateur

Epson

Epson TM-S9000MJ Manuel utilisateur

Epson

Epson SC-R5000 Series Manuel utilisateur

Epson

Epson Stylus Photo 780 Manuel utilisateur

Epson

Epson C2800 Manuel utilisateur

Epson

Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880... Manuel utilisateur

Epson

Epson Stylus C120 Series Manuel d'utilisation et d'entretien

Epson

Epson FX-880 - Impact Printer Manuel d'utilisation

Epson

Epson Stylus Photo 750 Manuel utilisateur

Epson

Epson Stylus Photo 925 Manuel utilisateur

Epson

Epson SP830U Manuel utilisateur

Epson

Epson 900N Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur

IRA3D

IRA3D POETRY4 Manuel utilisateur

Ricoh

Ricoh Aficio AP400 Manuel utilisateur

BIXOLON

BIXOLON SRP-352plusV Manuel utilisateur