Epson TM-T88II Series Manuel utilisateur
TM-T88II Series
User’s Manual
400852003
Printer Parts and Labels
Caution Labels
CAUTION:
Thermal head is hot.
ATTENTION:
La téte thermique est chaude.
VORSICHT:
Der Thermalkopf ist heiß.
Caution label above for the drawer kick-out connector.
ERROR
POWER
PAPER
OUT
FEED
ERROR
POWER
PAPER
OUT
FEED
FEED
Printer cover
Control panel
Cutter cover
Cover open button
Labels
Label inside
printer cover
Label inside
cutter section
i
Quick Reference
This Quick Reference will direct you to key areas of this Operator’s
Manual. For a complete listing of topics, see the Contents.
Printer Parts and Labels inside front cover
Ordering Paper page ix
Where to order paper.
Setting Up the Printer page 1-1
How to set up the printer.
Installing and Replacing Paper page 1-7
How to load or change the paper roll.
Solving Problems page 3-1
How to correct problems.
ii
All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without the prior written permission of Seiko
Epson Corporation. No patent liability is assumed with respect to the use of the
information contained herein. While every precaution has been taken in the
preparation of this book, Seiko Epson Corporation assumes no responsibility for
errors or omissions. Neither is any liability assumed for damages resulting from the
use of the information contained herein.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of
this product or third parties for damages, losses, costs, or expenses incurred by
purchaser or third parties as a result of: accident, misuse, or abuse of this product or
unauthorized modifications, repairs, or alterations to this product, or (excluding the
U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and
maintenance instructions.
Seiko Epson Corporation shall not be liable against any damages or problems arising
from the use of any options or any consumable products other than those designated
as Original Epson Products or Epson Approved Products by Seiko Epson
Corporation.
EPSON and ESC/POS are registered trademarks of Seiko Epson Corporation.
NOTICE: The contents of this manual are subject to change without notice.
Copyright © 1998 by Seiko Epson Corporation, Nagano, Japan.
iii
EMC and Safety Standards Applied
Product Name: TM-T88II
Model Name: M129B
The following standards are applied only to the printers that are so
labeled. (EMC is tested using the EPSON PS-170 power supply)
Europe: CE Marking
Safety: EN60950
North America: EMI: FCC/ICES-003 Class A
Safety: UL 1950/CSA C22.2 No. 950
Japan: EMI: VCCI Class A
Oceania: EMC: AS/NZS 3548
Taiwan: EMI: Class B
WARNING
The connection of a non-shielded printer interface cable to this printer will invalidate
the EMC standards of this device.
You are cautioned that changes or modifications not expressly approved by SEIKO
EPSON Corporation could void your authority to operate the equipment.
iv
CE Marking
The printer conforms to the following Directives and Norms
Directive 89/336/EEC EN 55022 Class B
EN 55024
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-11
Directive 90/384/EEC EN45501
FCC Compliance Statement
For American Users
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference, in which case the user will be required to
correct the interference at his own expense.
FOR CANADIAN USERS
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme àla norme NMB-003 du Canada.
v
GEREÄUSCHPEGEL
Gemäß der Dritten Verordnung zum Gerätesicherheitsgesetz
(Maschinenlärminformations- Verordnung-3. GSGV) ist der arbeitsplatzbezogene
Geräusch-Emissionswert kleiner als 70 dB(A) (basierend auf ISO 7779).
vi Quick Reference
About This Manual
Setting Up and Using
❏Chapter 1 contains information on unpacking the printer and setting it up.
❏Chapter 2 contains information on using the printer.
❏Chapter 3 contains troubleshooting information.
Reference
❏Chapter 4 contains specifications.
❏Appendix A tells how to change the DIP switch and paper near end settings.
Warnings, Cautions, and Notes
WARNING:
Follow warnings carefully to avoid serious bodily injury.
CAUTION:
Observe cautions to avoid minor injury to yourself or damage
to your equipment.
Note:
Notes have important information and useful tips on the operation of your
printer.
Introduction vii
Introduction
Features
TM-T88II Series printers are high-quality POS printers that can print on a paper roll.
The printers have the following features:
Printing
❏High-speed printing: 28.4 lines/second (4.23mm (1/6”) feed) maximum.
❏Low-noise thermal printing.
❏High reliability due to a stable mechanism.
Application Software
❏Command protocol is based on the ESC/POS®standard.
❏Various layouts are possible by using page mode.
❏Characters can be scaled up to 64 times as large as the standard size. Smoothing
is also possible.
❏Bar code printing is possible by using a bar code command. Bar codes can be
printed both in the vertical direction (fence bar code) and in the horizontal
direction (ladder bar code).
❏Repeated operations and copy printing are possible by using macro definitions.
❏Character font size (12 x 24 font or 9 x 17 font) can be selected using a command.
Printer Handling
❏Easy paper roll loading.
❏An autocutter is standard.
❏The printer allows easy maintenance for tasks such as head cleaning.
❏Three different print densities can be selected by DIP switches.
❏The built-in interface provides control capability for two drawers.
viii Introduction
Options and Accessories
❏EPSON power supply unit, PS-170.
❏Affixing tapes (model: DF-10).
❏RS-485 interface board can be installed as a dealer option.
❏Wall hanging bracket set (WH-10).
Autres manuels pour TM-T88II Series
3
Table des matières
Autres manuels Epson Imprimante
Epson
Epson ET-4700 Series Manuel utilisateur
Epson
Epson WF-R5190 Manuel utilisateur
Epson
Epson SC-F9400H Series Manuel utilisateur
Epson
Epson LX-810 Manuel utilisateur
Epson
Epson Stylus Pro 7900 Manuel utilisateur
Epson
Epson PM-400 Manuel
Epson
Epson 2080 - LQ B/W Dot-matrix Printer Manuel utilisateur
Epson
Epson WF-3820 Series Manuel utilisateur
Epson
Epson PictureMate CZ 283 Manuel utilisateur
Epson
Epson RR-600W Manuel d'instructions
Epson
Epson ActionPrinter L-1000 Manuel utilisateur
Epson
Epson WF-5190 Manuel utilisateur
Epson
Epson PM-7000C Mode d'emploi
Epson
Epson Expression Home XP-2100 Manuel utilisateur
Epson
Epson EPL-N7000 Manuel utilisateur
Epson
Epson WorkForce 1100 Manuel utilisateur
Epson
Epson Stylus pro 3800 portrait edition Manuel utilisateur
Epson
Epson PictureMate Snap PM 240 Manuel utilisateur
Epson
Epson Stylus Color 400 Manuel utilisateur
Epson
Epson PictureMate Manuel utilisateur
