Epson Stylus Photos 1390 Manuel utilisateur

Thanks for Purchasing the Flatbed Inkjet Printer！

Thanks to your support, and we are congratulating you now owned an multifunctional and

powerful flatbed inkjet printer which with unlimited media surface printable, it’s a high performance &

wide application range inkjet style almighty printing machine, and you can call it individuation fashion

printing machine.

The follow is some important suggestion about using method & security to this printer, we sincere

hope the printer in your hands could be applied with no any malfunctions and freely, wish you have

careful read to this Manual before using this printer, and be notice to the information about “Note” &

“Alarm” on this Manual.

And, please have good placement to this manual; it is the best guider for you and your employees

to operate this printer.

Security Notice

Avoid destroying this printer & having harm to the human body, you must obey this rule be

indicated on this part of “ Warn” on this manual, Please also care for the part of “ Note”

including the important information of operating and the else, unless, if have something destructed to

this printer which did not obey the user manual, we will not perform the quality maintaining jobs.

Announcement

Along with the quality be improved, please kindly understand that we might not have something

be modified on this manual in future.

FIRST: PLS DOWNLOAD EPSON

1390/1400 DRIVER FROM

EPSON.COM

Flatbed Inkjet Printer

２

Contents

Chapter one．

TheInstallationoftheFlatbed InkjetPrinter Page05~09

A．The preparative before Installation

B．The Diagrammatize of the Components

C．The Installation of the Printer

D．The ink injection

E．The installation of the Driver

Chapter Two．

Use to thePrinter Page10~21

A．Sketch map of the operation to this printer

B．The control panel of this printer

C．The Image Setting

D．The Correct way to use the inkjet Printer

E．The Cylindrical media printing

F．The Cleanout of print-head

Chapter Three．

The processingtosurfaceofmedia Page21~26

A．Coat

B．Intensify Liquid

C．Cleanout of Coat

D．The Important information to surface coat

Chapter Four．

The method&suggestiontoimage setting Page26~38

A．Color Control to image

B．Suggestion to image Setting

C．The function else

Chapter Five

Addendum Page38~39

A．The technical index

B．Merchandise information to consumable

Flatbed Inkjet Printer

３

Chapter one．

The Installation of the Flatbed Inkjet printer

A．The preparative before installation to the Flatbed Inkjet Printer.

1．Please have good placement to the printer with a space with conditions for no dust, faraway to heat

sources & humidity air, fire fountain, avoiding to be direct shined in sunshine, and avoiding to be

shaken; also, the temperature indoor should not with acute exchanging, during work, there might

have a little tremble to the printer, please have a table with size at 85x60cm to bear this machine

to avoid resonance which possible influence the quality of printing outputting.

2．Before turning on the power of the flatbed inkjet printer, please kindly check if the power with good

connection to terra, and also, please keep you computer system far away from electromagnetic

field, for such as something same to speakers, wireless phone, and so on.

3．Please apply undivided, with terra and standard power jack to the printer, before application, please

ensure the power cord and power jack could be full bear the printer, please do not use a power jack

which share to the other equipments. Also, please kindly have careful check to the power cord to

ensure it were not dilapidated.

4, with purpose of convenient for moving to this flatbed inkjet printer, please have proper conservation

to the all accessories & package materials to this flatbed inkjet printer.

Note：1,in this manual we also call this Flatbed Inkjet Printer to Printer。

2,We call the all devices to system equipment such as to Printer,Computer, scanner etc。

3, The printing object should is called media。

4．The Print-head would be ink head。

Alarm：during conveyance & placement, please don’t make the upside down, and, please don’t

make it be pressed & fallen。

B．Components Diagrammatize to the printer.

Note：with purpose for a correct way to install this printer, you should know the name

of every parts。

1．Turnover Cover — the windows for operating to ink supplying system & printing system。

2．Note Item — important item before operating to the printer

3．Media Flatbed — The moving Flatbed for bearing printing object。

Flatbed Inkjet Printer

４

4．Lifting Range — The space of movement about the flatbed。

5．Maintain Cover — the door for maintaining the quality of the printer。

6．The slot of installing for Column device。

7．Control Panel — the panel for operating the printer。

8．Scrap ink collector — for collecting the scrap ink。

9．Power Switch—To Control the power。

10．USB & parallel port for data communicating with computer.

11．Ink Bottle House — for continuous ink supplies。

12．Power jack—220Vpower supplies jack。

13．Holding shelf for ploy veil — for holding the veil。

14．The Fixing bolt of ink tank — for fixing the ink tank。

C．Install the printer

1．Place the printer to a good working flat roof，keep enough space for airiness。

2．Keep enough space front & rear for the movement of the flatbed.

Flatbed Inkjet Printer

５

3．Keep enough space up & down for the movement of the flatbed。

4．When the power of printer in status of OFF, please be

careful to insert power cord to the jack.

5．Then please switch on the power in the rear of the printer,

press the “down” key to move the flatbed to an apropos position, take away the protect materials

for the flatbed.

6．The power pin, power cord, data cable must connect fine,

fastness with computer, avoiding wrecked the printer due to suddenness shed.

7．When exit factory, any parts of the printer should be fixed by adhesive tape, please take them

away before use the printer.

8．The print-head is fixed by special steel piece for protection before exiting factory, before using

this printer, please draw out the steel piece from print-head.

D：Inkjet Ink to the printer

1, when you going to inkjet ink to the printer, please Screw off the cap of the ink tank, draw off the ink

House, take off the packet of the ink pipe, and use The 50ml injector which with soft pipe to suck

& inkjet ink to the printer, but please take attention to the according ink volume in the bottle.

2. Pump ink

When you are going to pump ink, after injecting ink to the printer, please take the ink bursa away

from ink cartridge orderly from 1 to 6, (as picture below)。Use injector to draw ink（As picture right），

and draw ink to the ink burs, perform it by order from 1 to 6, when the ink reach to volume 2/3 of the

bottle would be fine, after injection, please recover the bursa to the cartridge of the print head。

Flatbed Inkjet Printer

６

3. Pump depose ink

Open the depose ink protecting windows, please take the depose ink duct from the ink bottle,

connect it with the Injector, (please notice that the cartridge should be in position initialized), draw

back the injector and keep it with less volume ink in the injector, after this, please recover the

depose Ink duct back to the depose ink bottle.

When we finished the all course, please press the key “cleaning” to clean print-head. (You can

also do this step by software with clean function on computer)。

Note：

1．When we pump ink, there might have problem of speeding ink, it is indicating that the ink

bursa was damaged, please replace it.

2．During pump ink, if there with air seeping situation, and it could not pump ink good, it is

indicating there were not with good performance be sealed to the cleaning system, we need

to exchange the protector about print-head.

3．There might have “siphon” situation be happened in the transmission pipe of the printer, please

kindly have cleaning job to the printer after pump the depose ink.

4．For indicating the color of the ink, we have mark it with sign as below:

Cyan（blue）— C、Magenta（Red）— M、Yellow— Y、Black— K、

Light Cyan（Light Blue）— LC、Light Magenta（Light Red）—LM

Warn

Flatbed Inkjet Printer

７

1．When you inject ink to the printer, please according the seriation No. on the bottle of the printer,

avoiding dust & eyewinker to pollute the printer, please do the course in short time, unless, the

dust & eyewinker might block the print-head。

2．The ink which be applied by this printer is special for LOGE Series flatbed printer，please do not

use it for the other printer, and, please do not use the other brand ink for this printer, unless, it

might have damaged to this printer.

3．For storage to the ink, with protection idea, please make it with good seal, avoiding it close to high

temperature & fire. Please don’t burn the scrap ink & do not empty it to cloacae avoiding have

pollution to the living conditions. During application, When the ink taint with skin, please wash it

by Clearwater, if it has spatter to eyes, please also have cleaning by clear water, severe,

please contact with doctor, also, for better placement, please leave the ink to the place with child

could not reach.

E．Install Driver to the printer

Use the USB Cable to connect computer with

printer. Switch on the printer to enter standby status, insert the CD to the CD-ROM of the computer.

Click <Start>, select <Run>.

Input the Driver label of CD-ROM and setup.exe, click <browse> & select Setup.exe and

Press <Enter> key.

After, the printer will display “printer installation indication” ,please select “printer installation

indication/application tools”, program will automatic perform installation.

Note：Suggest use USB cable to connect

with printer, because it will obvious enhance the printing speed, if communicate by parallel port,

please shut off the power for the printer, unless, system might be damaged.

By now, the all course of installation to driver for printer would be finished, and you

can start to use the printer now。

CHAPTER TWO: USE PRINTER

A．The scheme of operation to the printer.

Note：before operating this printer, you should understand the all course of operating to this

printer。

Flatbed Inkjet Printer

８

There has three steps for operating to this printer：

1, Image Settings

By digital camera, scanner and other devices to gain image, to set the image

be gained by processing software on your computer.

2．Have coat processing to the surface of the printing object.

3．By image processing software to process the software and make the printing outputting.

After these steps, within short time, you will obtain a vivid & individuation high quality image.

Note：The processing to image by software is the base for operating the printer, if you would like

to understand the excellent performance about this printer, you have to master the all skill

of processing the image by software。

The button indicating to the Panel of the Flatbed Printer.

Button Function Instance Picture

For start & Close the control system of the

printer, press it to entry self-test status,

when we close it, print-head will back to

initiating position.

In correct connection situation, for cleaning

print-head, please press this button for

3seconds, if presses for once, printer will

entry loading status for media.

please press this button to pause the

printing job, after, the print-head will back to

initial position, repress, printing continuous,

in working status, press this button,

print-head back to initial position, repress,

printer will automatic reset.

Multifunction Button, use together with reset

button & batch Button for complex

application.

Flatbed Inkjet Printer

９

Multifunction Button, use together with reset

button & batch Button for complex

application.

Multifunction Button, use together with reset

button & Set Button for complex application.

Direction button: Lifting the Flatbed

Direction button: Drop the Flatbed

Button for automatic control the height of Flatbed.

Direction button: Move back the Flatbed

Direction button: Move ahead the Flatbed

Remark:

About the Direction buttons, they are control the flatbed moving direction for

lifting, dropping, Move ahead, move back. Press it for 3 seconds, the flatbed will

automatic move to terminal position, if you want to stop moving the flatbed, please

press it for once.

C．Image Setting

All kind of image be design by the image processing software on computer, we can make it with

outputting by printer, and now let’s have a simple explanation by the Famous Photoshop.

1．Open an image by PHOTOSHOP as below:

2．Select the third item “image” and select “image size” men。

Flatbed Inkjet Printer

１０

3．Set to “Image Size”

We can set the really printing image size outputting for width & height by documents size in menu,

the max differentiate about the image could be set to 300dpi/inche, and the least could be set at

200dpi/inche，when you have this setting, the quality of the image for printing outputting should be

better。

4．To set the really image size of the printing output.

Please select the third option of menu “Image” > “Rotary Image” > “Flip Horizontal Canvas”。

5．The following is the image effect(flip horizontal canvas) as below, for better printing effecting,

please select the printing model for model “inkjet back shot film”, this way would have outputting for

the image inverted effect。

Autres manuels pour Stylus Photos 1390

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Epson Imprimante

Epson

Epson L355 Mode d’emploi

Epson

Epson WF-100 Mode d’emploi

Epson

Epson GP-C831 Manuel de l'opérateur

Epson

Epson SureLab D3000 - Double Roll Manuel utilisateur

Epson

Epson TM-T58 Manuel utilisateur

Epson

Epson WorkForce WF-3520DWF Guide de l'utilisateur

Epson

Epson Expression Home XP-305 Instructions de montage

Epson

Epson SureColor P8570D Series Manuel utilisateur

Epson

Epson WorkForce WF-7010 Manuel utilisateur

Epson

Epson ColorPage 8000 Manuel utilisateur

Epson

Epson TM-T90 Manuel utilisateur

Epson

Epson WorkForce WF-7710 Manuel utilisateur

Epson

Epson SC-F10000H Series Guide de l'utilisateur

Epson

Epson Stylus Color 640 Manuel utilisateur

Epson

Epson LQ-630 Manuel utilisateur

Epson

Epson Stylus Color 850 Manuel utilisateur

Epson

Epson TM-T20II-i Manuel d'utilisation et d'entretien

Epson

Epson U675 - TM Color Dot-matrix Printer Manuel utilisateur

Epson

Epson Aculaser CX28DN Series Manuel utilisateur

Epson

Epson 11880 - Stylus Pro Color Inkjet Printer Manuel d'installation et d'exploitation

Epson

Epson U675 - TM Color Dot-matrix Printer Manuel utilisateur

Epson

Epson SP4000 Mode d’emploi

Epson

Epson Stylus Pro 7890 Series Manuel utilisateur

Epson

Epson Stylus Pro 7900 Instructions de montage

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur

IRA3D

IRA3D POETRY4 Manuel utilisateur

Ricoh

Ricoh Aficio AP400 Manuel utilisateur

BIXOLON

BIXOLON SRP-352plusV Manuel utilisateur