Epson LQ-2170 Manuel utilisateur
EPSON
®
24-Pin Dot Matrix Printer
LQ-2170
All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, without the prior written permission of Seiko Epson Corporation.
No patent liability is assumed with respect to the use of the information contained herein.
Neither is any liability assumed for damages resulting from the use of the information
contained herein.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this
product or third parties for damages, losses, costs, or expenses incurred by purchaser or
third parties as a result of: accident, misuse, or abuse of this product or unauthorized
modifications, repairs, or alterations to this product.
Seiko Epson Corporation and its affiliates shall not be liable against any damages or
problems arising from the use of any options or any consumable products other than those
designated as Original EPSON Products or EPSON Approved Products by Seiko Epson
Corporation.
EPSON and EPSON ESC/P are registered trademarks and EPSON ESC /P2 is a trademark
of Seiko Epson Corporation.
General Notice:
Other product names used herein are for identification purposes only
and may be
trademarks of their respective companies.
Copyright © 1995 by Seiko Epson Corporation, Nagano, Japan.
User’s Guide
Printer Update
Please update the information in your User’s Guide with the
information given below.
On page 1-15, replace the original text with the new
information below.
Setting Up Your Software
Refer to the following sections for printer driver installation
instructions.
for Microsoft windows use/s
If Microsoft Windows is installed on your computer, follow
the steps below to install the correct driver for your printer.
If you are using Windows 3.1, follow these steps:
1.
2.
3.
4.
5.
6.
Make sure Windows is running and the Program Manager
window is open.
Insert the floppy disk containing the driver into your floppy
disk drive.
Click
File;
then click
Run.
Type
A: SETUP
(or
B: SETUP); then click OK.
Select your printer’s name in the Printer Model window and
click
Continue.
The printer driver installs automatically.
Click
OK.
Copyright © 1996 by Seiko Epson Corporation,
4005786
Nogano, Japan
M01-00
On page 1-15, add the information below.
Installing the driver for Windows 95 users
Follow these steps to install the printer driver using the
Windows 95 plug-and play capabilities:
Note:
To install the
driver
using the Windows 95 plug-and play
capabilities, your computer’s parallel port must be an IEEE-2284
(ECP or EPP compatible) bidirectional parallel port. See
your
computer documentation for
more
information.
1.
Make sure plain paper is loaded in the printer and the
printer is connected to the computer’s parallel port. (The
paper is used to perform a test print in step 11.)
2.
Turn off your printer and computer, if necessary.
3.
Turn on the printer first; then turn on the computer. Your
computer begins loading Windows 95.
4.
If you defined a password, enter it at the prompt. You see
the New Hardware Found screen.
Note:
If you do not see the New Hardware Found screen, please follow
the procedure under “Installing the driver while running
Windows 95,” the next section.
5. Make sure your printer model name is displayed on the
screen.
Then
click the
Driver from disk provided by
hardware manufacturer
button. Do not select any of the
other buttons.
Note:
The next time you turn
on
your computer after installing the
driver, Windows 95 may display the New Hardware Found
screen again. In this case, click the
Do not install a driver
radio button; then click
OK.
This screen does not appear again.
2
6.
Click
OK. You see the Install
From Disk screen.
7.
Insert the Windows printer driver disk in a disk drive.
8.
If you inserted the disk in drive A, click
OK.
Otherwise,
change the drive letter in the Copy manufacturer’s files
from box and click
OK.
9.
At the next screen you can type a unique name for the
printer in the Printer name box. We recommend that you
keep the model name as shown. The program will copy
the files to your hard disk and add an icon to the Printers
folder using the printer name you assign.
To use the printer as the default printer for Windows 95
applications, select
Yes. (No
is the default setting.)
10. Click the
Next
button.
11.
In the next screen, select
YES to
print a test page.
12. Click the
Finish
button.
13.
Choose
Yes
in the test page confirmation dialog if the page
printed correctly. If it did not print correctly, choose
N
O
and follow the directions on the screen.
To
access
the driver, see “Checking the printer driver
settings,” page 5 of this supplement.
3
Installing the driver while running Windows 95
If you are using Windows 95, follow the steps below.
1.
In the Desktop window, double-click the
My Computer
icon.
2.
3.
4.
5.
Double-click the
Printers
folder.
Double-click the
Add Printer
icon.
Click the
Next
button.
Select the
Local printer
or
Network printer
radio button.
Then click the
Next
button.
6.
7.
Click the
Have Disk
button.
Insert the floppy disk containing the driver into your
computer’s floppy disk drive.
8. Type
A: WIN 95
(or
B: WIN 95); then click OK.
9.
Select your printer’s name in the dialog box, then click the
Next
button.
10.
Select the port you want to use with this printer.
11. Click the
Next
button.
12.
Select the
Yes
radio button if you want to make your
printer the default printer. Otherwise, select the
N
O
radio
button.
13. Click the
Next
button.
14.
Click the
Yes
radio button to print a test page.
15. Click
Finish.
16.
In the dialog box that appears, choose
Yes
if the test page
printed satisfactorily. If it didn’t print satisfactorily,
choose
N
O
and follow the directions that appear on your
screen.
4
On page 1-16, add the information below. If you are using
Windows 3.1, refer to the information in your User’s Guide.
Checking the printer driver settings
If you are using Windows 95, follow these steps to select the
appropriate settings.
1.
In the Desktop window, click the
Start
button.
2.
Select
Settings; then
click
Printers.
3. Right-click on your printer icon.
4. Choose Properties.
5.
Select the paper size you have loaded in the printer from the
Paper size list on the Paper menu. If you don’t see your
paper size, scroll through the list, and select the correct
size. The diagram on the screen changes according to the
paper size you select.
6.
Select Portrait or Landscape orientation. The diagram on the
screen changes according to the orientation you select.
7.
Select the paper source.
8.
Select the resolution on the Graphics menu.
9.
Make any other settings you wish, and click
OK
when you
are finished.
5
On pages 1-18 through 1-20, replace the original information
with the new information below.
DOS printer utilities
Your printer driver disk includes the EPSON Remote! and
EPSON Calibration utilities. You can use EPSON Remote! to
change the printer’s default settings from your computer
instead of the control panel. EPSON Calibration is used to
properly align your printout.
Installing EPSON printer
utilities
To install the utilities, follow these steps:
1.
2.
3.
4.
Insert the floppy disk containing the printer utilities into
your computer’s disk drive.
From the DOS prompt, type
A: SETUP
(or
B: SETUP); then
press
Enter.
In the screen that appears, select your printer’s name in the
Printer Model window and press
Enter. C: EPUTIL
appears
as the default directory.
Press
Enter.
All the necessary files are copied to the EPUTIL
directory on drive C.
Using EPSON printer utilities
To use your EPSON utilities, follow these steps:
1.
From the DOS prompt, change the current directory to the C
drive.
2.
To use the EPSON Remote!
utility,
type
PRNSET,
and press
Enter,
or to use the EPSON Calibration utility, type
CALIBRAT,
and press
Enter.
3. Follow the instructions on the screen to use either utility.
6
On pages 2-11, and 2-12, replace the original illustrations as
follows:
1.
Please replace the illustration on page 2-11 of your User’s
Guide
with the illustration below.
2. Please replace the illustration on the upper portion of page
2-12 of your
User’s Guide
with the illustration below.
7
On page 5-3, add the information below.
When replacing the ribbon cartridge or ribbon pack, you can
use the cartridge and pack listed below, in addition to the
products listed in your User's
Guide.
Ribbon cartridge
S015086
Ribbon pack
S010033
Printed in Japan 96.02-16
Printer Parts
Autres manuels pour LQ-2170
3
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Epson Imprimante
Epson
Epson Stylus Pro 10600 - UltraChrome Ink - Stylus Pro 10600 Print... Manuel utilisateur
Epson
Epson SureColor SC-P906 Manuel utilisateur
Epson
Epson SC-T5400 SERIES Manuel utilisateur
Epson
Epson WF-100 Manuel utilisateur
Epson
Epson FX-1050+ Manuel utilisateur
Epson
Epson Stylus Pro 7600 Manuel utilisateur
Epson
Epson WorkForce WF-7010 Manuel utilisateur
Epson
Epson Stylus C41 series Manuel
Epson
Epson WF-7210 series Mode d’emploi
Epson
Epson AcuLaser CX11N Instructions de montage
Epson
Epson EPL-N2750 Manuel utilisateur
Epson
Epson L380 Manuel utilisateur
Epson
Epson TM-U200 Series Manuel utilisateur
Epson
Epson Stylus C40UX Manuel utilisateur
Epson
Epson Mural 8 Manuel utilisateur
Epson
Epson STYLUS CX3700 SERIES Manuel utilisateur
Epson
Epson L1300 Manuel utilisateur
Epson
Epson Stylus Photo PX730WD Mode d’emploi
Epson
Epson LQ-2180 Manuel utilisateur
Epson
Epson WF-C20600 Manuel utilisateur
