Epson EPL-N4000 Manuel utilisateur
Flamingo
Rev. C
A6 size Qrintro.fm
11/5/98 Pass 0
LProof Sign-off:
Takata _______
Nishi _______
Kurt _______
This Quick Reference Guide contains information on
clearing paper jams, understanding printer error
messages and changing the imaging cartridge.
Attach the included quick reference box to the front of
your printer as shown below as a convenient place to
keep this guide.
For more details on the items covered in this guide and
about your printer in general, see the Reference Guide.
1
Proof Sign-off:
<M.Takata> _______
<K.Nishi> _______
<K.Pipa> _______
<Flamingo>
Rev. C
A6 size Qr.fm
11/5/98 Pass 0
R
Paper Jam Problems
Preventing Paper Feed and Paper Jam
Problems
To prevent frequent paper feed or paper jam problems,
use this checklist of corrective measures.
❏Use a higher-quality paper, one that is not too thin
or rough.
❏Fan a stack of paper and tap it on a flat surface to
even its edges before you load it.
❏Be sure that you do not load too much paper in the
paper sources.
❏Be sure to adjustthe paper guides so thatthe paper
can slide in and out freely.
❏Never lettheamount ofaccumulatedsheets exceed
the total output capacity of any output tray or bin.
❏Make sure you load paper with the correct side up.
Most packages of paper indicate the top side of the
paper with an arrow at the side of the package.
2
<Flamingo>
Rev. C
A6 size Qr.fm
11/5/98 Pass 0
LProof Sign-off:
<M.Takata> _______
<K.Nishi> _______
<K.Pipa> _______
Clearing Paper Jams
Whenapaperjamoccurs,Jam xxx xxx xxx xxx message
appears on the control panel. Xxx indicates areas where
jamsmaybeoccurring,suchasLC1(lowercassette1).See
the messages below for instructions on clearing paper
jams in each area.
Note:
❏Check for jams at allpapersources or paths indicated on
the control panel. Theprinter cannot resume printing if
the jams are not cleared.
❏Thecontrolpanelshowsuptofourpapersourcesorpaths
at the same time. Other areas where jams may be
occurring will be shown on the control panel after you
have checked all indicated jams.
D
LC4
LC3
LC2
LC5
LC1
DM
ENV
C
A
MP
B
3
Proof Sign-off:
<M.Takata> _______
<K.Nishi> _______
<K.Pipa> _______
<Flamingo>
Rev. C
A6 size Qr.fm
11/5/98 Pass 0
R
Paper Jam Problems
Jam LC1,Jam LC2 or Jam LC3 (LC3 is part of an option)
This message indicatesthat paper jammay be occurring
in lower cassette 1, 2, or 3 (LC3 appears if the optional
Large Capacity Paper Unit is installed).
1. Pull out the indicated cassette (lower cassette 1, 2,
or 3).
2. Carefully remove any paper you find jammed
inside the cassette or printer.
3. Remove the stack of paper from the cassette. Even
its edges by tapping the paper on a flat surface.
Thenreinsertthestackintothecassettemakingsure
the paper is evenly aligned and rests below the
maximum paper mark.
Make sure you are using the correct paper size and
that your paper meets the specifications for this
printer.
4. Reinstall the cassette.
5. Clear other paper jams that are indicated on the
control panel.
4
<Flamingo>
Rev. C
A6 size Qr.fm
11/5/98 Pass 0
LProof Sign-off:
<M.Takata> _______
<K.Nishi> _______
<K.Pipa> _______
6. After that, if the control panel still indicates LC1,
LC2 or LC3, completely remove the indicated
cassette.
7. Carefully remove any sheets that have fed part way
into the printer.
8. Reinstall the removed cassette.
cCaution:
if you completely removed a cassette, be sure to
put it back into its original position. Changing
cassette 1 with cassette 2 (or cassette 3, if
installed) causes improper paper feeding.
9. The jammed page’s print data is automatically
reprinted.
5
Proof Sign-off:
<M.Takata> _______
<K.Nishi> _______
<K.Pipa> _______
<Flamingo>
Rev. C
A6 size Qr.fm
11/5/98 Pass 0
R
Paper Jam Problems
Jam MP
This message indicates that there may bea paper jam in
the MP (Multi Purpose) Tray.
1. Move the paper guide on the MP tray outwards.
2. Removeallthepaperfromthetray,anddiscardany
wrinkled or folded sheets.
3. Tap the edges of the paper stack on a flat surface.
Then reload the paper in the MP tray, making sure
it is evenly aligned and rests below the maximum
paper mark.
Make sure you are using the correct paper size and
that your paper meets the specifications for this
printer.
4. Clear any other paper jams indicated on the control
panel.
6
<Flamingo>
Rev. C
A6 size Qr.fm
11/5/98 Pass 0
LProof Sign-off:
<M.Takata> _______
<K.Nishi> _______
<K.Pipa> _______
5. After that, if the control panel still indicates Jam MP,
completely remove the MP tray.
6. Carefully remove any sheets that have fed part way
into the printer.
7. Reinstall the removed tray and reinsert the paper.
Jam A
This message indicates that there may be a paper jam
inside cover A.
1. Open cover A on the left side of the printer. If the
optional Duplex Unit is installed, open cover DM
first, then open cover A. If the optional Envelope
Feeder is also installed, remove it before opening
the Duplex Unit.
wWarning:
When opening the printer, do not touch the hot
areas indicated on the caution labels inside cover
A.
7
Proof Sign-off:
<M.Takata> _______
<K.Nishi> _______
<K.Pipa> _______
<Flamingo>
Rev. C
A6 size Qr.fm
11/5/98 Pass 0
R
Paper Jam Problems
2. Remove any paper you find jammed inside the
printer.
Note:
Becausethetoneronthepaperinsidetheprintermaynot
have been fixed on the page, toner may come off on your
hands when you remove the paper. If you spill toner on
your clothing, rinse it off with cold water. Using hot
water may leave a permanent stain.
8
<Flamingo>
Rev. C
A6 size Qr.fm
11/5/98 Pass 0
LProof Sign-off:
<M.Takata> _______
<K.Nishi> _______
<K.Pipa> _______
3. If the paper is difficult to remove, use the gear lever
inside cover A shown below. Push the lever in and
up repeatedly to feed the jammed paper back out
cover A.
wWarning:
When opening the printer, do not touch the hot
areas indicated on the caution labels inside cover
A.
4. If necessary, open the front cover to remove the
imaging cartridge and any paper left in the paper
feed path, and then reinsert the imaging cartridge.
If you do not find any jammed paper, it may be in
another area.
5. Close the front cover, if opened, then close cover A.
Close the Duplex Unit, then reinstall the Envelope
Feeder, if you have these options.
6. When the paper jam is cleared completely, the
jammed page’s print data is automatically
reprinted.
Autres manuels pour EPL-N4000
4
Table des matières
Autres manuels Epson Imprimante
Epson
Epson ES-C320W Manuel utilisateur
Epson
Epson EPL-6100L Manuel utilisateur
Epson
Epson WorkForce WF-2880 Series Manuel utilisateur
Epson
Epson T88IIIP - TM B/W Thermal Line Printer Manuel d'utilisation et d'entretien
Epson
Epson Printer Manuel de service
Epson
Epson XP-55 Mode d’emploi
Epson
Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880... Manuel d'utilisation et d'entretien
Epson
Epson WorkForce AL-C500DN Manuel utilisateur
Epson
Epson STYLUS PRO WT7900 Instructions d'installation et d'entretien
Epson
Epson WorkForce 60 Guide de référence
Epson
Epson OpticFilm Series Manuel utilisateur
Epson
Epson Stylus C66 Manuel utilisateur
Epson
Epson 2000P - Stylus Photo Color Inkjet Printer Manuel utilisateur
Epson
Epson 680Pro - LQ B/W Dot-matrix Printer Manuel utilisateur
Epson
Epson Stylus Pro 7900 CTP Manuel utilisateur
Epson
Epson Stylus OFFICE B30 Manuel utilisateur
Epson
Epson XP-302 Mode d’emploi
Epson
Epson Disc producer PP-100N Security Manuel de service
Epson
Epson Stylus Pro XL Manuel utilisateur
Epson
Epson SC-P600 series Manuel utilisateur
