Epson C831 Manuel utilisateur

USER MANUAL

Roll to roll system

for EPSON C831

this product is certified:

APPLICATIONS

The label rewinder and unwinder specically designed for Epson C831 color label printer can

handle rolls up to 240mm (8.66”) media wide and having an outside diameter up to 250mm (10”).

Unit is equipped with a xed 3” core holder.

POWER SUPPLY

An external power supply 100/240VAC - 2.5A at 24V allows an electronic circuit to provide,

through the tension arm, the speed and sense of rotation auto adjustment.

INSTALLATION

STEP 1

Connect together both plates and lean

theprinter.

Attach the printer plate to the unwinder. DDo

not tighten the knobs until the unwinder will be

properly aligned to the printer.

STEP 2

Place carefully the printer into the lock guides.

STEP 3

Load both roll of media and outer disk onto the

core holder.

Tighten the core through the knob.

STEP 5

Once the media is loaded into the printer, slide

left and right the unwinder to nd the correct

alignment between the two units and tighten

the knobs.

STEP 6

Attach the rewinder to the printer plate.

Do not tighten the knobs until the rewinder will

be properly aligned to the printer.

STEP 7

Load the empty cardboard core onto the core

holder.

STEP 8

Keeping the printed media underneath the

tension arm, stick the end on the cardboard

core.

STEP 4

Keeping the media underneath the tension

arm, turn on the unwinder and feed the media

into the printer.

Please look at printer’s user manual and

follow the detailed procedure on how to

load the media into the printer.

Heavy Rolls

For heavy rolls please use the designated

support.

STEP 9

Slide in the outer disk onto the core holder and

keep it close to the media edge.

Tighten the knob.

Once the media is loaded on the rewinder,

slide left and right the rewinder to nd the

correct alignment between the two units and

tighten the knobs.

WORKING CONDITIONS

LABEL REWINDER:

- When the printer forwards the media for printing, the tension arm goes down, the device rewinds

the media. Yellow or green led on depending on the selected rewinding mode (face-in or face-out).

- When the tension arm is in the middle position, the device is idle. Both yellow and green leds on.

- When the printer backwards the media, the tension arm goes up, the device unwinds it. Yellow or

green led on depending on the selected rewinding mode (face-in or face-out).

LABEL UNWINDER:

- When the printer forwards the media for printing, the tension arm goes up, the device unwinds

the media. Yellow or green led on depending on the selected rewinding mode (face-in or face-out).

- When the tension arm is in the middle position, the device is idle. Both yellow and green leds on.

- When the printer backwards the media, the tension arm goes down, the device rewinds it. Yellow

or green led on depending on the selected rewinding mode (face-in or face-out).

When the unit is operating but the media is not loaded or it runs out, the tension arm reaches the

lowest position and after few seconds the unit will stop by itself, both leds blink and it beeps.

CONTROL PANEL

ON-OFF

Push this button to turn On or O󰀨 the unit.

INCREASE SPEED

Push this button to increase the rotation speed.

DECREASE SPEED

Push this button to decrease the rotation speed.

LABEL FACE-OUT

Turn the unit o󰀨. Keep pushed “FACE OUT” button, push

and release “ON-OFF” button while the green led turns on

and o󰀨. The unit is now ready to operate.

LABEL FACE-IN

Turn the unit o󰀨. Keep pushed “FACE IN” button, push and

release “ON-OFF” button while the yellow led turns on and

o󰀨. The unit is now ready to operate.

smart solutions for the labeling industry

Label rewinder, label unwinder, electronic label dispenser and more...

- FOR MORE INFO CONTACT YOUR RESELLER -

Table des matières

Autres manuels Epson Imprimante

Epson

Epson AcuLaser C900 Manuel utilisateur

Epson

Epson NPD4919-00 EN Manuel utilisateur

Epson

Epson Stylus Color II Manuel utilisateur

Epson

Epson SureLab D3000 - Double Roll Manuel utilisateur

Epson

Epson SC-F3000 Series Manuel utilisateur

Epson

Epson R300 - Stylus Photo Color Inkjet Printer Manuel utilisateur

Epson

Epson ActionPrinter 3250 Manuel utilisateur

Epson

Epson U950 - TM B/W Dot-matrix Printer Manuel utilisateur

Epson

Epson Stylus Color 480SXU Dimensions

Epson

Epson WorkForce 40 Series Manuel utilisateur

Epson

Epson B-300 - Business Color Ink Jet Printer Manuel utilisateur

Epson

Epson TM-J9000 Series Manuel d'installation et d'exploitation

Epson

Epson C11C424001 - Stylus C80 Color Inkjet Printer Dimensions

Epson

Epson WF-3825 Manuel utilisateur

Epson

Epson TM-P80 Manuel utilisateur

Epson

Epson LQ-300+II Manuel utilisateur

Epson

Epson PictureMate Mode d’emploi

Epson

Epson DFX-8500 - Impact Printer Manuel utilisateur

Epson

Epson Stylus Pro 7500 Manuel

Epson

Epson OT-CU40 Manuel utilisateur

Epson

Epson TM-S2000MJ Mode d’emploi

Epson

Epson TM-H6000 Manuel utilisateur

Epson

Epson PictureMate Charm - PM 225 - PictureMate Charm Compact Photo... Manuel utilisateur

Epson

Epson TM-m10 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur

IRA3D

IRA3D POETRY4 Manuel utilisateur

Ricoh

Ricoh Aficio AP400 Manuel utilisateur

BIXOLON

BIXOLON SRP-352plusV Manuel utilisateur