Epson AcuLaser C2000 Manuel utilisateur

Where to Find Information

Setup Guide (this manual)

Provides you with information on how to place the printer,

assembling the printer’s parts and installing the printer’s driver.

Reference Guide (online guide)

Provides you with detailed information on the printer’s functions,

optional products, maintenance, troubleshooting, and technical

specifications.

Administrator’s Guide (online guide)

Provides network administrators with information on both the

printer driver and network settings.

Quick Reference

Provides you with a list of LCD panel messages and information

on replacing consumables andclearing jammed paper. This guide

can be hung on the printer with the hook provided.

Online Help

Provides you with detailed information and instructions on the

printer software that controls your printer. Online help is

automatically installed when you install the printer’s software.

Setup Guide

Color Laser Printer

1SafetyInstructions . . . . . . . . . . . . . . . .4

2Removing the Protective Materials . 11

3Finding aPlace for the Printer . . . . .13

4Assembling the Printer . . . . . . . . . . .15

5Installing the Options . . . . . . . . . . . .25

6Testing and Connecting the Printer .36

7Installing the Printer Driver. . . . . . . .39

8To Know More About Your Printer . .43

iii

transmitted in any form or by any means, mechanical, photocopying, recording, or otherwise,

without the prior written permission of SEIKO EPSON CORPORATION. No patent liability is

assumed with respect to the use of the information contained herein. Neither is any liability

assumed for damages resulting from the use of the information contained herein.

Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this

product or third parties for damages, losses, costs, or expenses incurred by purchaser or third

parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications,

repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with SEIKO

EPSON CORPORATION’s operating and maintenance instructions.

SEIKO EPSON CORPORATION and its affiliates shall not be liable against any damages or

problems arising from the use of any options or any consumable products other than those

designated as Original EPSON Products or EPSON Approved Products by SEIKO EPSON

CORPORATION.

EPSON and EPSON ESC/P are registered trademarks and EPSON ESC/P 2 is a trademark of SEIKO

EPSON CORPORATION.

Adobe and PostScript are trademarks of Adobe Systems Incorporated, which may be registered in

certain jurisdictions.

Apple and Macintosh are registered trademarks of Apple Computer, Inc.

General Notice: Other product names used herein are for identification purposes only and may be

trademarks of their respective owners. EPSON disclaims any and all rights in those marks.

Safety Instructions 4

1Safety Instructions

Laser Printer Precautions

This printer uses laser technology. Follow the precautions below

carefully to ensure safe, efficient operation.

❏Be careful not to touch the fuser, which is marked CAUTION

Hot Surface Avoid Contact, or the surrounding areas. If the

printer has been in use, these areas may be very hot.

❏Do not attempt to modify or take the developer cartridge

apart. It cannot be refilled.

❏Do not touch the toner and avoid all toner contact with your

eyes.

❏Do not dispose of used developer cartridges, photoconductor

units, fuser oil rolls, or waste toner collectors in fire, as they

can explode and cause injury. Dispose of them according to

local regulations.

Hinweis:

Die Geräteanschlußleitung muß den einshlägigen Normen genügen. Es

muß eine dreiadrige Leitung verwendet werden. Die Anshlußleitung

darf nicht leichter als H05VV-F order H05VVH2-F sein.

CAUTION Hot Surface

Avoid Contact

5Safety Instructions

Important Safety Instructions

Read all of the following instructions before operating your

printer:

❏The printer weighs about 39.5 kg (87 lb) without consumables

installed. Always have two or more people lift the printer

using the correct lifting positions.

❏Follow all warnings and instructions marked on the printer.

❏Unplug the printer from the electrical outlet before cleaning.

Use a damp cloth for cleaning and do not use liquid or aerosol

cleaners.

❏Avoid touching the components inside the printer unless

instructed to do so in this guide.

❏Never force printer components into place. Although the

printer is designed to be sturdy, rough handling can damage

it.

❏Be sure to keep consumables out of the reach of children.

❏Do not leave jammed paper inside of the printer. This can

cause the printer to overheat.

❏Do not use the printer near water.

❏Do not place the printer on an unstable surface.

❏Do not put your printer where the cord will be stepped on.

❏Avoid using outlets that other appliances are plugged into.

left right

Safety Instructions 6

❏Slots and openings, located on the sides of the printer, are

provided for ventilation. Keep these slots and openings clear

to allow proper ventilation. Avoid placing the printer on a soft

surface like a bed or a sofa, or in a small enclosed area, as this

restricts ventilation.

❏When using an extension cord, be careful not to exceed its

recommended amperage limit. Also, be sure that all items

plugged into the electrical outlet do not exceed a total of 15

amperes.

❏Never push objects of any kind through cabinet slots as they

may touch dangerous voltage points or short out parts that

could result in fire or electric shock.

❏Never spill liquid on the printer.

❏Unless specifically instructed in this guide, do not attempt to

service this product yourself. Opening or removing covers

that are marked Do Not Remove exposes you to dangerous

voltage points and other risks. Refer all servicing in those

compartments to a qualified service representative.

❏Adjust only those controls that are covered by the operating

instructions. Improper adjustment of other controls may

result in damage and may require repairs by a qualified

service representative.

❏Unplug the printer and refer servicing to a qualified service

representative under the following conditions:

A. If liquid has entered the printer.

B. If the printer has been exposed to rain or water.

C. If the printer does not operate normally or exhibits a

distinct change in performance.

D. If the printer has been dropped or the cabinet damaged.

E. When the power cord or plug is damaged or frayed.

7Safety Instructions

❏If you plan to use the printer in Germany, observe the

following:

To provide adequate short-circuit protection and over-

current protection for this printer, the building installation

must be protected by 10 or 16 amp circuit breaker.

Safety Information

Laser safety labels

wWarning:

The use of controls, or the performance of procedures and

adjustments other than those specified in this guide may result

in hazardous radiation exposure.

Internal laser radiation

Max. Radiation Power 1.16 mW

Wave Length 775 to 795 nm

Your printer is a Class 1 laser product

as defined in the IEC60825

specifications. The label shown below

is attached in countries where

required.

This is a Class IIIb Laser Diode Assembly

that has an invisible laser beam. The

printer head unit is NOT A SERVICE ITEM,

Therefore, the printer head unit should

not be opened under any

circumstances. An additional laser

warning label is affixed to the inside of the

printer.

Safety Instructions 8

CDRH regulations

For information about the Center for Devices and Radiological

Health of the U.S. Food and Drug Administration, see the online

guide.

Ozone safety

Ozone emission

Ozone gas is generated by laser printers as a by-product of the

printing process. Ozone is produced only when the printer is

printing.

Ozone exposure limit

The recommended exposure limit for ozone is 0.1 parts per

million (ppm) expressed as an average time-weighted

concentration over an eight (8) hour period.

The EPSON AcuLaser C2000 laser printer generates less than 0.1

ppm for 8 hours of continuous printing.

Minimize the risk

To minimize the risk of exposure to ozone, you should avoid the

following conditions:

❏Use of multiple laser printers in a confined area (see above)

❏Operation in conditions of extremely low humidity

❏Poor room ventilation

❏Long, continuous printing together with any of the above

Printer location

The printer should be located so that the exhaust gases and heat

generated are:

9Safety Instructions

❏Not blown directly into the user’s face

❏Vented directly out of the building whenever possible

For United Kingdom Users

The EPSON AcuLaser C2000 is a page printer which utilizes a

semiconductor laser.

There is no possibility of danger from the laser, provided that the

printer is operated according to the instructions in the guides

provided.

Since radiation emitted by the laser is completely confined within

protective housings and external covers, the laser beam cannot

escape from the machine during any phase of user operation.

wWarning:

The use of controls, or the performance of procedures and

adjustments other than those specified in this guide may result

in hazardous radiation exposure.

This is a semiconductor laser. The maximum power of the laser

diode is 15 mW and the wavelength is 775 to 795 nm.

Use of options

Epson (UK) Limited shall not be liable against any damages or

problems arising from the use of any options or consumable

products other than those designated as Original EPSON

Products or EPSON Approved Products by Epson (UK) Limited.

Safety information

Warning: This appliance must be earthed. Refer to rating plate

for voltage and check that the appliance voltage corresponds to

the supply voltage.

Autres manuels pour AcuLaser C2000

Table des matières

Autres manuels Epson Imprimante

Epson

Epson LX-1170 Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Epson

Epson SureColor T3475 Mode d’emploi

Epson

Epson TM-J9000 Series Manuel utilisateur

Epson

Epson ProofPlus TM-H6000III Manuel utilisateur

Epson

Epson SP7900HDR - Stylus Pro 7900 Color Inkjet... Manuel utilisateur

Epson

Epson R260 - Stylus Photo Color Inkjet Printer Guide d'installation

Epson

Epson 50 - Artisan 50 - Printer Manuel utilisateur

Epson

Epson Stylus Color 400 Manuel utilisateur

Epson

Epson LQ-780 Manuel utilisateur

Epson

Epson EcoTank ET-15000 Series Mode d’emploi

Epson

Epson FX-1050+ Manuel utilisateur

Epson

Epson ActionLaser ActionLaser II Manuel utilisateur

Epson

Epson Stylus Color 640 Manuel utilisateur

Epson

Epson AL-M8250DN Manuel utilisateur

Epson

Epson WF-C878RDWF Manuel utilisateur

Epson

Epson WF-2860 Series Manuel utilisateur

Epson

Epson XP-900 Series Mode d’emploi

Epson

Epson SureLab D3000 - Double Roll Manuel d'utilisation et d'entretien

Epson

Epson Stylus Pro 9890 Series Manuel utilisateur

Epson

Epson L11160 Series Mode d’emploi

Epson

Epson AcuLaser C900 Manuel utilisateur

Epson

Epson J7000 - TM B/W Inkjet Printer Manuel utilisateur

Epson

Epson Stylus Pro GS6000 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur

IRA3D

IRA3D POETRY4 Manuel utilisateur

Ricoh

Ricoh Aficio AP400 Manuel utilisateur

BIXOLON

BIXOLON SRP-352plusV Manuel utilisateur