Epson EHDMC10 Manuel utilisateur

2014.06

Wireless Mirroring Adapter

EHDMC10

Introduction

Thank you very much for purchasing this product.

Make sure you read this guide before using the product to ensure you use it

safely and correctly. Keep this guide in a safe place so that you can access it

easily if you have any questions in the future.

Safety Instructions

This documentation uses graphical symbols to show how to use the product

safely and avoid injury to others or damage to property. These symbols and

their meanings are shown below. Make sure you understand these symbols

before reading this guide.

Warning

This symbol indicates information that, if ignored, could

possibly result in personal injury or even death due to

incorrect handling.

Caution

This symbol indicates information that, if ignored, could

possibly result in personal injury or physical damage due to

incorrect handling.

Warning

Only use the unit at the specied voltage.

Check the specications for the power cable.

If you do not use the correct power cable, a re or electric shock could occur.

Do not leave this product unattended in locations subject to unusually high

temperatures such as in a car with the windows closed, in direct sunlight or, next to the

exhaust vent of an air-conditioner or heater.

The product may be deformed by the high temperatures, the internal workings may be

damaged, or a re could occur.

Do not place vases, containers containing water, or medical containers on this product.

If any liquid spills from the container, a re or electric shock could occur.

Take care when handling the power plug.

If it is not handled correctly, a re or electric shock could occur.

Note the following points when handling the plug.

• Do not overload wall outlets, extension cables, or power strips.

• Do not plug it in if there are any foreign substances, such as dust, attached to the plug.

• Make sure the plug is fully plugged in.

• Do not plug in or unplug if your hands are wet.

• Do not unplug by pulling on the power cable.

• Do not use a dierent power supply (AC adapter).

Do not use a damaged power cable.

Otherwise, a re or electric shock could occur.

• Do not modify the power cable.

• Do not place heavy objects on the power cable.

• Do not apply excess force, bend, or twist the power cable.

• Do not perform wiring near an electric heater.

Do not install or use this product in locations subject to humidity or water such as the

outdoors, or near a bath or shower.

Otherwise, a re or electric shock could occur.

Do not touch the plug during a thunderstorm.

Otherwise, an electric shock could occur.

If you notice any of the following abnormalities, turn off the product immediately,

unplug the power cable from the electrical outlet, and contact your local dealer or

Epson service call center.

• If you see smoke coming from the product, or notice abnormal odors or sounds.

• If any water or foreign substance enters the product.

• If the product was dropped and the case was damaged.

If you continue using the product in any of these states, a re or electric shock could occur.

Do not perform repairs yourself.

Except as indicated in the "User's Guide", the case for this product should only be

opened by qualied service personnel. Do not disassemble or remodel this product or

its consumables.

Many sections inside the product carry a high electrical charge which could cause a re or

electric shock to occur.

Caution

When moving the product, make sure you turn o the power, unplug the power cable

from the electrical outlet, and disconnect any wiring before moving.

Otherwise, a re or electric shock could occur.

Do not install the product in a location subject to humidity or dust such as a kitchen

counter or near a humidier, or in a location subject to smoke or steam.

Otherwise, a re or electric shock could occur.

Do not install the product in the following locations.

• On a carpet, a bed, a blanket, and so on.

• Do not cover it with a blanket, curtain, tablecloth, and so on.

Do not place the product on a surface that is slanted or unstable.

Otherwise, it could fall and cause an injury.

When maintaining the product, do not use a wet cloth or solvents such as alcohol,

benzene, or thinner.

Otherwise, an electric shock or malfunction could occur.

Do not sit on this product, or place heavy objects on this product.

Otherwise, an injury could occur.

When maintaining the product, make sure you unplug the power, unplug the power

cable from the electrical outlet, and disconnect any wiring before performing

maintenance.

Otherwise, an electric shock could occur.

For safety reasons, make sure you unplug the power cable from the electrical outlet

when the product is not in use.

If the insulation has degraded, a re could occur.

When using this product, make sure it is at least 22 cm (8 inches) away from your body.

WARNING: This product contains chemicals, including lead, known to the

State of California to cause birth defects or other reproductive harm. Wash

hands after handling. (This notice is provided in accordance with Proposi-

tion 65 in the Cal. Health & Safety Code § 25249.5 and later.)

Wirelessly send images from video devices (Source function)

You can send images from devices that support HDMI output such as

HDD recorders, and playback the images on MOVERIO BT-200.

Wireless/

Pass-Thru

Wireless

Connect

Wireless

Ready Link

Wirelessly receive images from MOVERIO BT-200 (Sink function)

You can receive images from MOVERIO BT-200, and then playback the

images on a television or projector.

Features

HDMI cable

Note

You can only connect to one MOVERIO BT-200 to send or receive images.

Parts and Functions

Ports

A

micro USB port

Supplies power to this unit. Connect to an electrical outlet using the sup-

plied micro USB cable and AC adapter.

B

HDMI Output port

Outputs images received from the HDMI Input or Miracast connection.

C

HDMI Input port

Inputs images from other devices.

Included Items

Base unit micro USB cable AC adapter

(Depend on country)

An HDMI cable is not included. To connect an HDMI device, you need to ob-

tain a commercially available HDMI cable.

Wireless/

Pass-Thru

Wireless

Connect

Wireless

Ready Link

Reset button

Buttons and Indicators

A

Slide switch

Changes between the Source and Sink functions.

B

Wireless/Pass-Thru button

When sliding the switch to [Source]:

Switches the output device between the MOVERIO BT-200 and the device

connected to the HDMI Output.

When sliding the switch to [Sink]:

Switches the input device between the MOVERIO BT-200 and the device

connected to the HDMI Input.

C

Wireless Connect button

Attempts to connect again when a disconnection occurs.

D

Wireless Ready indicator

On: Wireless connection is available.

Flashing: Wireless connection is starting up.

E

Link indicator

On: Wireless connection has been established.

Flashing: Connecting.

When an error occurs, Dand Eash alternately. Press the Reset button.

Wireless/

Pass-Thru

Wireless

Connect

Wireless

Ready Link

Image sending device Image receiving device

Sending images from a video device to your MOVERIO BT-200 (Source

function)

Connect a commercially available HDMI cable to the HDMI Input port on

this unit and to the HDMI output port on the device that is sending images.

Set the slide switch to Source.

Connections

Preparing to Connect (Wireless Mirroring Adapter Operations)

Press the Wireless/Pass-Thru button.

The Wireless Ready indicator ashes for approximately one minute. When the

indicator is lit, this unit enters connection standby status. If you connect a device

to the HDMI Output port, you see the following screen.

Note

You cannot output images to the MOVERIO BT-200 and the device connected

to the HDMI Output port at the same time. Press the Wireless/Pass-Thru but-

ton to switch the output device without changing the cable connection.

Connecting (MOVERIO BT-200 Operations)

1. Launch MOVERIO Mirror that comes preinstalled on MOVERIO BT-200.

Connection is complete when the status displayed below Adapter Name changes

to [Connected] and the Link indicator on this unit changes from flashing to lit.

Images are displayed on MOVERIO BT-200.

Ending the Connection (MOVERIO BT-200 Operations)

1. Press the [ ] key on MOVERIO BT-200 while images are being

viewed.

2. Tap [ ], and then follow the on-screen instructions to stop receiving

images.

3. Press the [ ] key several times to close MOVERIO Mirror.

2. Tap [Sink] on the MOVERIO Mirror

main screen.

3. Tap [Target Device].

4. Tap the Adapter Name (EHDMC1-XXXXXX) attached to this unit from

the list of available devices.

The status displayed below Adapter Name changes to [Invited], and connection

starts.

You see the following screen on the device connected to the HDMI Output port

while connecting.

Wireless/

Pass-Thru

Wireless

Connect

Wireless

Ready Link

Preparing to Connect (Wireless Mirroring Adapter Operations)

Press the Wireless/Pass-Thru button.

The Wireless Ready indicator ashes for approximately one minute. When the

indicator is lit, this unit enters connection standby status. If you connect a device

to the HDMI Output port, you see the following screen.

Image sending device

Image receiving device

Receiving images from MOVERIO BT-200 to output to a television (Sink

function)

Connect a commercially available HDMI cable to the HDMI Output port on

this unit and to the HDMI input port on the device that is receiving images.

Table des matières

Autres manuels Epson Adaptateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur