EOS Zeus Guide de l'utilisateur

MADE IN GERMANY

IPx4

Zeus

print no. 29344847 en / 34.17

EN Installation and operating instruction

sauna heater

guard rail optional

2EN

English

Table of Contents

Intended use ............................................................................................................................................3

General notes...........................................................................................................................................3

Important notes......................................................................................................................................4

Scope of delivery ...................................................................................................................................7

Specifications...........................................................................................................................................7

Wiring diagrams......................................................................................................................................8

Connection examples...........................................................................................................................9

Installation and Safety gaps ............................................................................................................10

Heater guard rail installation........................................................................................................... 11

Replacement of heating elements................................................................................................ 12

Sauna stones.........................................................................................................................................13

Maintenance and care.......................................................................................................................14

Service Address....................................................................................................................................15

General Terms and Conditions of Service (ASB).......................................................................16

Dear customer

You have purchased a high-quality technical

device with which you will have years of sauna

fun.This sauna heater was designed and inspect-

ed according to the current European safety

standards and manufactured at the factory

in accordance with the quality management

standard DIN EN ISO 9001:2008.

This detailed installation and operation manual

has been prepared for your information. Please

observe in particular the important notes and

the information on electrical connection.

We wish you exhilarating recreational experience

and lots of fun with your sauna!

Intended use

This sauna heater is exclusively intended for the

heating of sauna cabins in combination with an

appropriate control unit.

Any other use over and above the intended

purpose is not considered as appropriate use!

Compliance of the standard operation, mainte-

nance and repair conditions is also an element

of appropriate use.

The manufacturer cannot be held liable for

deviating, unauthorized alterations and any re-

sulting damages: the initiator of these changes

bears the full risk.

General information

Please check whether the unit has arrived in per-

fect condition. Any transport damages should be

immediately reported to the freight forwarder

delivering the goods or you should contact the

company that shipped the goods.

Please note that you will only be able to achieve

an optimum sauna climate if the cabin with its air

intake and ventilation, the sauna heater and the

control unit are aligned to each other.

Please observe the information and stipulations

made by your sauna supplier.

Sauna heaters heat up your sauna cabin using

heated convective air. Here, fresh air is drawn

in from the air intake which, when heated, rises

upwards (convection) and is then circulated

within the cabin. Part of the used air is pushed

out through the vent in the cabin.This creates a

typical sauna climate which can achieve temper-

atures of approx. 110°C measured directly under

the ceiling of your sauna, dropping in temper-

ature to approx. 30-40°C towards the oor. It is

therefore not unusual to measure temperatures

of 110°C on the temperature sensor hanging

over the heater, whilst the thermometer hanging

on the sauna wall, approx. 20-25 cm under the

cabin ceiling, only indicates 85°C. The bathing

temperature generally lies between 80°C and

90°C in the area of the upper bench when the

temperature is set to maximum.

Please note that the highest temperatures are

always generated over the sauna heater and that

the temperature sensor and the safety limiter

must be mounted there in accordance with the

control unit installation instructions.

When heating up for the first time, you may

notice a slight smell caused by evaporating

lubricants used in production processes. Please

ventilate your cabin before beginning your

sauna bath.

4EN

Important notes

• Unprofessional installation may

cause a re hazard! Please read these in-

stallation instructions carefully. In particu-

lar, please observe the dimensions stated

and the following notes.

• This device can be used by children aged

8 upwards and by persons with physical,

sensory, or mental disabilities, or who

have inadequate experience and knowl-

edge if they are supervised or if they have

received adequate instruction in how to

use the device safely and understand the

associated risks. Children may not play

with this device. Children may not clean

or carry out any user maintenance if un-

supervised.

• Children should be supervised to make

sure that they will not play with the unit.

• Only specialists may install and con-

nect the sauna heater, control unit and

other electrical equipment with a xed

mains connection. The necessary protec-

tive measures according to VDE 0100 of §

49 DA/6 and VDE 0100 part 703/2006-2

must be observed.

• Sauna heater and controller may only be

used in sauna cabins made of suitable,

low-resin, untreated materials (e.g. spruce).

• Only a sauna heater with the appropriate

power output may be installed in the sau-

na cabin.

• Please provide air intake and vent open-

ings in each sauna cabin. The air intakes

must always be positioned behind the

sauna heater, approx. 5 to 10 cm above

the oor. The minimum dimensions of the

air intake and vent openings are stated in

the table.

• The duct vents are always to be positioned

oset diagonally to the sauna heater in

the lower area of the rear sauna wall. The

air intake and vents may not be covered.

Please observe the sauna cabin supplier's

instructions.

• Only the control units specied here-

in must be used for the operation of the

sauna heater. This control unit must be

positioned at an appropriate point on the

cabin outer wall; the associated sensor

must be positioned inside the sauna cabin

according to the installation instructions

included with the control unit.

• Caution: Covering the heater or an

incorrectly lled stone container represent

a re hazard.

• Every time before the sauna is used,

ensure that no objects have been left lying

on the sauna heater.

• Caution: The high sauna heater

temperatures generated during operation

can cause burns.

• The sauna heater is not intended for in-

stallation or set-up in a niche, under a

bench or under a sloping roof.

• Do not put the sauna heater into operation

when the air intake is closed.

• The cabin lighting and the corresponding

installation must correspond with the

"splash protected" version in accordance

with DIN EN VDE 0100 T 703. Therefore,

only VDE-tested sauna light with max. 40

Watt may be installed in connection with

the sauna heater.

• Only a locally certied electrician

may connect the sauna facility (sauna

heater, control unit, lighting etc.) to a xed

mains connection.

• All electrical installations and all connec-

tion lines that are installed inside the cab-

in must be suitable for an ambient tem-

perature of at least 170 °C. If single-wire

cables are used as connection lines, they

must be protected using a exible metal

tube connected to the equipment ground-

ing conductor. Please see the table for the

minimum cross-section of the connection

cable and the suitable cabin size in rela-

tion to the power input in kW.

• When installing the sauna heater, please

ensure that the vertical clearance be-

tween the sauna heater upper edge and

the sauna ceiling is maintained. Please

see also the dimensions diagram for the

clearance between the lower edge of the

sauna heater and the oor. On heaters

with bases, this clearance is maintained

via the base or legs of the device.

• Please always ensure that the sauna heat-

er is never placed on ooring made of

ammable material (wood, plastic oor-

ing etc). Ceramic tiles are recommended

as oor materials.

• Floor heating in the sauna cabin increases

the surface temperature of the ooring.

• Please see the dimensions information

for the respective sauna heater for the

clearance between the heater protective

grating or the bench and other ammable

materials. The heater protective grating

must roughly accord with the front height

of the sauna heater.

• Please also observe the information and

instructions provided by the cabin manu-

facturer.

• Please take precautions when

cleaning components with sharp edges.

• Upright heaters need to be tted on site

with elements that prevent them from

overturning.

• Attention: Pour the infusion water

only on the sauna rocks and never any-

where else.

• When using your sauna in a dry

Finnish mode never add sauna essences or

6EN

place any herbs into the vaporizer holder

for essences/herbs. Fire hazard!

• Never add more essences or vol-

atile oils than advised on the packaging.

Never use alcohol or undiluted concen-

trates.Caution! Fire hazard!

• When designing the cabin ensure

that the external exposed glass surfaces

only reach a maximum temperature of

76°C. If necessary, protective features

need to be tted.

Caution!

Dear Customer,

In compliance with the valid regulations,

only certied electricians may connect the

sauna heater and the sauna control system

to the mains power supply. Please note

that you must provide a copy of the invoice

from the electrical company who installed

the sauna in case of a warranty claim.

Electrical connection

Using the above-mentioned wiring diagram

and the information on the wiring circuit ad-

hered to the respective control system, your

electrician will be able to connect the system

without further instructions.

Please note that, for safety reasons, power ca-

bles may not be laid visibly on the interior walls

of the cabin. Most sauna cabins have empty

ducts tted into the wall element with the air

intake.

If no empty ducts are available in your cabin,

drill a suciently sized hole in the cabin wall

directly next to the place where the cable exits

the sauna heater and guide this cable outside

through the hole to the control unit. The cable,

and all other connecting cables (mains power

cables and cabin lighting), should be installed

in installation ducts or also be protected against

damage on the outside of the cabin e.g. by lay-

ing them in installation pipes or attaching wood

cover strips.

The sauna heater, if used in commercial/public

facilities and equipped with remote control*,

may be used only in combination with the ap-

propriate cover protection system or S-Guard

system.

*Remote control – means settings, switching, control

and adjustment of the sauna control unit by means of

commands transmitted from a remote location beyond

sight distance using telecommunication, wire- or wire-

less signal transmission systems, network and similar

systems.

Specications

Scope of delivery

Power Dimensions

Ø x H in cm For cabin volume

Minimum

dimension for

air supply and

duct vent

Weight without

stones and

packaging

Stone lling

Power extension

unit (LSG)

required

To be used with the

control units

12 kW

Ø 70 x 125

14 - 18 m³ 50 x 6 cm

140 kg 130 - 140 kg

Emotec

LSG 09R

Econ series

Emotec series

EmoStyle series

EmoTouch series

16 kW 18 - 25 m³ 50 x 6 cm

20 kW 24 - 30 m³ 50 x 8 cm LSG 18

24 kW 35 - 40 m³ 50 x 8 cm

30 kW 50 - 65 m³ 50 x 10 cm LSG 36

36 kW 65 - 75 m³ 50 x 10 cm

Power Electric

connection

external

Fuse protection

control unit

Connection:

mains - control

unit

external

Fuse protection

LSG unit

Connection:

mains - LSG

Connection:

control

unit - heater

Connection:

LSG - heater

Connection:

control unit -

LSG

12 kW

400 V 3N AC

50 Hz

3 x 16 A 5 x 2,5

5 x 1,5

4 x 1,5

16 kW

5 x 620 kW 3 x 25 A 5 x 4

24 kW 3 x 35 A 5 x 6

30 kW 1 x 16 A 3 x 1,5 3 x 50 A 5 x 10 -- 2 pcs. 5 x 6

36 kW 3 x 63 A 5 x 16 2 pcs. 5 x 6

All details on cable cross-sections are minimum diameters in mm² copper line.

The standard scope of delivery includes:

• Sauna heater

• Connection cable (consists of two separate cable lines with special connectors)

• Installation and operation manual

• sauna stones (approx. 130-140 kg)

8EN

30 kW

5 x 6 2

2,5 kW

1,66 kW

36 kW

5 x 6 2

3,0 kW

zum LSG 36

20 kW

5 x 1,5 2

5 x 4 2

1,0 kW

12 kW

5 x 1,5 2

1,0 kW

zum Steuergerät

1,33 kW

16 kW

5 x 1,5 2

zum LSG 09 R

zum Steuergerät

zum LSG 09 R

1,33 kW

zum LSG 18

zum Steuergerät

zum LSG 36

2,0 kW

24 kW

5 x 1,5 2

5 x 6 2

zum LSG 18

zum Steuergerät

Wiring diagrams

Connection example

30 / 36 kW

400 V AC 3N

N U V W

U V W N L1 L2 L3 N

S1 V N

400 V AC 3N

fan light

L N L N

L1 L2 L3 N W V U N N

3 4

S1 N

STB

Saunasteuergerät / Control unit /

Boîtier de commande / Пульт управления

LSG

Contactor box

Saunaofen

Sauna heater

Sensorbus

Saunabus

reserviert

N U V W

1 1 1 1

Sensor

Limiter

LSG

5 5

Saunasteuergerät

Control unit

Boîtier de commande

Пульт управления

Saunaheizgerät

Sauna heater

Poêle de sauna

Печь для сауны

Leistungsschaltgerät

Power extension unit

Extension de puissance

Блок расширения мощности

Netz / Mains / Réseau / Сеть

400 V AC 3N 400 V AC 3N

fan light

L N L N

L1 L2 L3 N W V U N N

3 4

S1 N

STB

Saunasteuergerät / Control unit /

Boîtier de commande / Пульт управления

Sensor

Saunaheizgerät / Sauna heater

Sensorbus

Saunabus

reserviert

V N S1

MAINS OVEN LSG

NL1 L2 L3 N W V U

Leistungsschaltgerät LSG 09R

U1 V1 W1 N1

PE U V W N PE

Limiter

20 / 24 kW

12+16 kW

10 EN

Installation

The sauna heating unit is designed for operation with an input voltage of 400V AC 3N through the

sauna control unit and a separate power extension unit.

Sauna heaters maybe operated via remote control* only in combination with an approved safety

system like EOS switch-o guard rail.

*Remote control – means settings, switching, control and adjustment of the sauna control unit by means

of commands transmitted from a remote location beyond sight distance using telecommunication,

wire- or wireless signal transmission systems, network and similar systems

Minimum clearances

The sauna cabin must have a minimum inside height of 210 cm.

The vertical gap between the top of the sauna heater and the inner surface of the sauna ceiling must

be at least 130 cm, the horizontal gap between the heater and the cabin wall or other ammable

materials must be at least 10 cm.

The distance between the heater guard and/or bench and other ammable materials must be at

least 10 cm.The height of the heater guard must be the same as the height of the front of the stove.

mind. 1300

Sensor

320

~1250

Maße in mm

mind.

100

mind.

100

Autres manuels pour Zeus

Table des matières

Autres manuels EOS Chauffage

EOS

EOS Saunadome II Manuel utilisateur

EOS

EOS Zeus S Manuel utilisateur

EOS

EOS Bi-O Mat U Guide de planification

EOS

EOS EURO Guide de planification

EOS

EOS 94 3742 Guide d'installation

EOS

EOS Cubo Manuel utilisateur

EOS

EOS Mega S HD Manuel utilisateur

EOS

EOS 46.U Guide de planification

EOS

EOS IRS 35 RHK Guide de planification

EOS

EOS Gracil Series Manuel utilisateur

EOS

EOS 46.U Guide de planification

EOS

EOS Vitae Protect+ Guide de planification

EOS

EOS MEGA 720 Manuel utilisateur

EOS

EOS 46.U XL Guide de planification

EOS

EOS 43.FN Guide de planification

EOS

EOS Mythos S45 Manuel utilisateur

EOS

EOS Zeus S Manuel utilisateur

EOS

EOS IRS 35 Guide de planification

EOS

EOS Mega Manuel utilisateur

EOS

EOS Edge Control Manuel utilisateur

EOS

EOS P1 W Manuel utilisateur

EOS

EOS VITAE Guide de planification

EOS

EOS Bi-O Gracil Guide de planification

EOS

EOS Filius Control Guide de l'utilisateur

Manuels Chauffage populaires d'autres marques

oventrop

oventrop Regucor Series Manuel utilisateur

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manuel utilisateur

ELMEKO

ELMEKO ML 150 Manuel utilisateur

BN Thermic

BN Thermic 830T Manuel utilisateur

KING

KING K Series Mode d’emploi

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guide de démarrage rapide

Well Straler

Well Straler RC-16B Manuel utilisateur

EUROM

EUROM 333299 Manuel utilisateur

Heylo

Heylo K 170 Manuel utilisateur

Eterna

Eterna TR70W Manuel utilisateur

Clarke

Clarke GRH15 Mode d’emploi

IRSAP

IRSAP The Radiator Company Ovali Manuel utilisateur

Empire Heating Systems

Empire Heating Systems WCC65 Manuel utilisateur

Wetekom

Wetekom 92 86 43 Manuel utilisateur

Desa

Desa SPC170-F Manuel utilisateur

Watlow

Watlow Watrod Electric Tubular Heaters Manuel utilisateur

Haverland

Haverland ECO-DRY GPS Series Manuel de la liste des pièces

Stelpro

Stelpro ASILVC2060 Series Manuel utilisateur