ENTR Dead Bolt Manuel utilisateur
ii ENTR® Dead Bolt User Manual
Table of Content
1. Cylinder Installaon 5
1.1 Package Content 5
1.2 Tools Requirements 5
1.3 Prior to Installaon 6
1.4 Cylinder & Unit Installaon 6
1.5 Magnet Fing 8
2. ENTR® Descripon 9
2.1 ENTR® Descripon 9
2.2 Indicaons 9
2.3 ON/OFF Switch 10
2.3.1 Switching the ENTR® ON 10
2.3.2 Switching the ENTR® OFF 10
2.3.3 Low Baery Indicaon 10
2.4 Iniang the Lock 11
2.5 Default PIN Code 11
3. Operaon 12
3.1 Changing PIN Code 12
3.2 Door Conguraon 13
3.3 Pairing Remote Control 16
3.4 Deleng Remote Control 17
3.5 Seng the Sound Signal 18
3.6 Seng Locking Mode 19
3.7 Operated by Knob 20
3.8 Operated by Slide Buons 20
iii
ENTR® Dead Bolt User Manual
4. Touchpad Reader 21
4.1 Changing PIN Code 21
4.2 Baery Replacement 21
4.2.1 Low Baery Indicaon 21
5. Touchpad Reader Operaon 22
5.1 Operaon 22
5.2 Pairing Touchpad Reader 22
5.3 Touchpad Reader Master PIN Code 24
5.4 Menu Mode 24
5.5 Adding Personal User Code 24
5.6 Open Door 25
5.7 Lock Door 25
5.8 Delete Personal User Code 25
5.9 Delete All Personal User Codes 25
5.10 Volume Control 26
5.11 Factory Reset 26
6. Fingerprint Reader 27
6.1 Mounng the Fingerprint Reader 27
6.2 Baery Replacement 27
6.3 Adjust Date & Time 27
6.4 Pairing Fingerprint Reader 28
6.4.1 Add Master 29
6.4.2 Set Finger 29
6.4.3 Set PIN Code 29
6.5 Unlock the Door 30
4ENTR® Dead Bolt User Manual
iv
6.6 Lock Door 31
6.7 Low-baery Indicaon 31
6.8 Seng Menu 31
6.9 Add User 32
6.10 Delete User 33
6.11 Enable/Disable User 33
6.12 Delete all Users 34
6.13 Add Time Schedule 34
6.14 Edit Time Schedule 35
6.15 Volume Control 35
6.16 Double Security 36
6.17 Factory Reset 36
7. Smartphone App 37
7.1 App Installaon 37
7.2 Pairing Smartphone 38
8. Remote Control Baery Change 39
8.1 Baery Removal 39
8.2 Baery Inseron 40
9. Troubleshoong 41
10.1 Limitaons and External Inuences 41
10.2 Cases 41
Limited warranty 44
Federal Communicaons Commission (FCC) Statement 47
5
ENTR® Dead Bolt User Manual
1.1 Package Content
1. Cylinder Installaon
1.2 Tools Requirements
• Small Phillips screwdriver
Note: Do not use power tools or any excessive force to assemble ENTR® parts.
Baerycharger5
Magnet6
Inside drive adapter7
Mounngscrews8
Base plate & Knob1
Electrical unit2
Mounngscrew
3
Panel screw
4
Decoravespacer9Allen key #3
10
6ENTR® Dead Bolt User Manual
1.3 Prior to Installaon
• Priortoinstallaoncheckboltlockingdirecon.
• Verifythattheboltisinopenposion(boltinsidethedoor,unlocked).
• Rotateadaptertail-pieceoppositetotheboltlockingdireconunlstopped(see
belowdrawing#1).
• Verifythatthewideteethispoinngup.Ifnotrotatetheexternalringunlthe
wideteethwillpointup(seebelowdrawing#2).
1.4 Unit Installaon
Warning:Donotaempttooperatetheunitunlassembledintothedoor
• Removeknobscrewusing1/16"Allenkeyandtaketheknobout.
• Useaatscrewdrivertoremovethecover.
• RemovebothAllenscrewsenrelyandremoveinternalmechanism.
Note:Whileremovingtheinternalmechanismsecuretheoutsidecylinderfrom
falling.Considerusingmaskingtapeorsimilar.
Knob
Knob screw
Cover
Boltlockingdirecon
Rotate adapter tail piece opposite
totheboltlockingdirecon
Wide teeth
Drawing#1
Drawing#2
7
ENTR® Dead Bolt User Manual
Adapter
• Place the Inside drive adapterandghtenthe
screws.Donotoverghtenthescrewsoruse
power tools.
• Placedecoravespaceroverthe
Inside drive adapter.
• Assemblebaseplate(top
housing&knob).
• Tightencylindermounngscrew.
Note: Incasethe"Malerectangle"ontheadapterisnotalignedwiththe"Female
rectangle"ontheKnob,theunitwillnotengageproperlyandmaycausetomalfuncon.
Femalerectangle
Adapter
Mounngscrew
Base plate
Decoravespacer
Malerectangle Femalerectangle
Adapter
8ENTR® Dead Bolt User Manual
1.5 Magnet Fing
• Carefullyconnectdatacableplug.
• Assembleelectricalunitpanel(baeryhousing).aachetobase
plate(1)andpushdown(2).
• Tightenelectricalunitpanelscrew.
Electrical unit
Datacableplug
1
Panel screw
2
MagnetFing:
• Mountthemagnetontheframe
moldings,ascloseaspossibleto
the lock.
• Thelowerpartofthemagnetshould
alignwiththelowerpointoftheslider
(seeillustraon).
Note:Themagnetareaonframemolding
shouldbecleanandfreefromdust,
peelingpaintetc.Usealcoholifrequired.
Waitunlcompletelydrypriortoscking.
Frame
molding
Magnet
Slider
9
ENTR® Dead Bolt User Manual
2.2 Indicaons
Error (Red)Baery status (Green/Red)Door not closed (Red)
OK (Green)Manual Mode (Green)Mute (Green)
Knob
ON/OFFswitch
Indicaons
Touchpad
2.1 ENTR® Descripon
2. ENTR® Descripon
10 ENTR® Dead Bolt User Manual
• TurningtheENTR®lockON or OFF.
2.3.1 Switching the ENTR® ON
BeforeturningENTR® ON,verify that the
door is shut.
• Move the switch to the ONposion.
Make sure that the knob is in the zero
posion(seeillustraon).
• Funconandnumericbuonswillall
blink once.
• Hazardbeepsoundwillbeemiedand
errorindicaonwillblinkonce.
• ENTR®isnowinoperang mode.
Note:
• AerturningENTR®ON,avoidtouching
thefrontpanelunlbeepsoundends.
• AerturningENTR®ON,thedoorwillbe
shut but not locked.
2.3 ON/OFF Switch
2.3.2 Switching the ENTR® OFF
• Move the switch to OFFposion.
2.3.3 Low baery indicaon
Baeryredsignalrapidlyblinkingand2longbeepswillbesoundedduringevery
lock/unlockacon,indicangthatthebaeryislowandneedstobecharged.
OFF ON
•
Zeroposion
11
ENTR® Dead Bolt User Manual
2.4 Inializaon of the Lock
Iniatethelockbytouchingthemiddleofthetouchscreen
withthepalmofyourhandorngersfor3seconds.
• Programingbuonsandbaerystatusindicaonlight
willilluminatefor15seconds,waingforuser'sacon.
• Aer15secondsofinacvity,ENTR®willidle.
2.5 Default PIN Code
The lock's default factory PIN code is: 1 2 3 4 5 #
Please note:
• DefaultPINcodemustbechangedbeforestarngtheconguraonprocess.
• ThePINcodemustconsistof4-10digitsusingnumbers1through5inanysequence.
• Only the Code and MutefunconswilloperateunlthedefaultPINcodeischanged.
Warning:Don'tforget/losethePINcodeoncechanged,otherwiseyouwillbe
locked out. Keep your new PIN code in a safe place.
Table des matières
