The connectivity error light ( ) is ashing
continuously on one side of the piste.
The equipment error light ( ) for my side of
the piste is ashing.
The relay box error lights ( ), and
equipment error lights ( ) ash ve times
when I rst turn on the system.
The off-target light(s) on the scoring machine
are ashing.
Hits are not being registered correctly.
This indicates that the fencer touched-on to
that side of the piste has low battery in their
pocket box.You can still fence with this error.
This indicates there is a problem with that
fencer’s pocket box.
Check:
1. Do you have the pocket box oriented in
your pocket correctly? (Fencer silhouette
facing you, EnPointe logo facing outward.)
2. Is the pocket box able to properly sense
the fencer? For best performance, the pocket
box must be close to the body and snug in
the pocket.Very loose clothing may cause the
box to hang off the body or rattle around.
3. Has it been more than 5 seconds since
any of the above has occurred? The light will
ash for 5 seconds after it records any of the
above scenarios.
You can still fence with this light ashing,
but in extreme circumstances, system
performance may be impacted.
This indicates that the batteries in the relay
box are very low (20% battery life) and will
need to be replaced soon.You are still able
to fence with the system while this error is
present.
As in the wired system, you may be fencing
with a body wire that needs replacing.
Check that the connector cords, or épée
wires, are not broken at any point and are
properly connecting the relay box to the
scoring machine.
Troubleshooting and warning lights | 7