USER MANUAL
USB 300 / USB 400J / USB 500U
USB Gateway for EnOcean Radio
© 2019 EnOcean | www.enocean.com USB 300 / USB 400J / USB 500U User Manual | May 2019 | Page 8/13
4. DOCUMENTATION OF PROTOCOLS AND ENOCEAN PROFILES
Plug’n play device drivers are available from USB chip manufacturer FTDI for the oper-
ating systems Microsoft Windows, Linux and Apple Mac OS:
http://www.ftdichip.com/FTDrivers.htm
If you want to develop for other host platforms, you can use or adapt available C-source
code for Linux OS from FTDI Website:
http://www.ftdichip.com/Drivers/VCP.htm
USB stick uses EnOcean Serial Protocol 3 for control commands and data communica-
tion. A description of ESP 3 is available at:
http://www.enocean.com/en/knowledge-base/
The content of EnOcean radio telegrams is standardized by the EnOcean Alliance. You
will find the latest definition of EnOcean Equipment Profiles (EEP) at:
http://www.enocean-alliance.org/
Attention:
The USB stick has been designed for gateway applications, some radio tele-
grams (e.g. Smart Acknowledge RORGs 0xC6/C7/A7/D0) will be internally
processed and not sent to host. For the same reason measurement of sub tele-
gram amount and timing is not supported. It is not customer programmable
with DolphinSniffer software.
For detailed protocol tracing it is strongly recommended to use TCM 320 or
STM 300 on adapter with DolphinSniffer from the EnOcean Developer Kit.
