Enerzone SOLUTION 1.4 Manuel utilisateur
READ AND KEEP THIS MANUAL FOR REFERENCE
Printed in Canada 46263_IA
SOLUTION 1.4
(EB00061 model)
Wood Stove
Owner's Manual
Part 2 of 2
INSTALLATION AND OPERATION
REQUIREMENTS
MOBILE
HOME
Safety tested according to ULC S627,
UL 1482 and UL 737 standards by an
accredited laboratory.
US Environmental Protection Agency
phase II certified wood stove compliant
with 2020 cord wood standard
CONTACT LOCAL BUILDING OR FIRE OFFICIALS ABOUT RESTRICTIONS AND INSTALLATION INSPECTION REQUIREMENTS
IN LOCAL AREA.
READ THIS ENTIRE MANUAL BEFORE INSTALLATION AND USE OF THIS WOOD STOVE. FAILURE TO FOLLOW THESE
INSTRUCTIONS COULD RESULT IN PROPERTY DAMAGE, BODILY INJURY OR EVEN DEATH.
ENGLISH
2022-09-07
ONLINE WARRANTY REGISTRATION
If the unit requires repairs during the warranty period, proof of purchase must be provided.
The purchase invoice must be kept. The date indicated on it establishes the warranty period.
If it can not be provided, the warranty period will be determined by the date of manufacture of the
product. It is also highly recommended to register the warranty online at
https://www.enerzone-intl.com/en/warranty/warranty-registration/
Registering the warranty will help to quickly find the information needed on the unit.
Dealer:
Installer:
Phone Number:
Serial Numbrer:
Page 3
Installation and Operation Requirements - Solution 1.4
ENGLISH
TABLE OF CONTENTS
1. CERTIFICATION PLATE .......................................................................................................... 4
2. General Information ................................................................................................................ 5
2.1 Performances..................................................................................................................... 5
2.2 Specifications..................................................................................................................... 6
2.3 Dimensions ........................................................................................................................ 7
2.4 EPA Loading ...................................................................................................................... 9
3. Clearances to Combustible Material.................................................................................... 10
3.1 Clearances........................................................................................................................10
4. Floor Protection .................................................................................................................... 17
5. Reducing Wall and Ceiling Clearances Safely .................................................................... 18
5.1 Shield Construction Rules ..................................................................................................18
6. Installation of options on your product................................................................................ 21
6.1 Decorative Panels..............................................................................................................21
6.2 Optional Fresh Air Intake Kit Installation ..............................................................................23
6.3 Optional Fire Screen Installation ........................................................................................24
6.4 Optional Blower And Thermodisc Installation.......................................................................25
6.5 Air Tubes And Baffle Installation..........................................................................................26
6.6 Mobile Home Installation ....................................................................................................28
7. Maintenance/Parts Replacement......................................................................................... 29
7.1 Replacement.....................................................................................................................29
7.2 Gasket..............................................................................................................................30
7.3 Door .................................................................................................................................30
8. Exploded Diagram and Parts List ........................................................................................ 33
ENERZONE LIMITED LIFETIME WARRANTY ........................................................................... 36
Page 4 Installation and Operation Requirements - Solution 1.4
ENGLISH
1. CERTIFICATION PLATE
Page 5
Installation and Operation Requirements - Solution 1.4
ENGLISH
2. General Information
2.1 Performances
Values are as measured per test method, except for the recommended heating area, firebox volume,
maximum burn time and maximum heat output.
Model Solution 1.4 (EB00061)
Type of combustion Non-catalytic
Fuel Type Dry Cordwood
Recommended heating area (sq. ft..)1 250 to 1,200 ft2(23 to 111 m2)
Overall firebox volume21.8 ft3(0.0510 m3)
Loading volume EPA 1.55 ft3(0.0439 m3)
Maximum burn time15 hours
Maximum heat output (dry cordwood)3 45,000 BTU/h (13.2 kW)
Overall heat output rate (min. to max.)2 4 12,124 BTU/h to 26,700 BTU/h
(3.55 kW to 7.83 kW)
Average overall efficiency3
(Dry cordwood) 74 % (HHV)5 79 % (LVH)6
Optimum efficiency7 80 %
Optimum overall efficiency8 79 %
Average particulate emissions rate9 1.8 g/h (EPA / CSA B415.1-10)10
Average CO11 74 g/h
1Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type
and other variables. The recommended heated area for a given appliance is dened by the manufacturer as its capacity to maintain a minimum
acceptable temperature in the designated area in case of a power failure.
2The overall rebox calculation is an approximation and is not intended to be used for loading. This volume includes a buffer zone to allow an easier
fuel insertion, prevent ash spillage and allow the air wash to work properly.
3The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft3and 20 lb/ft3. Other performances are based on
a fuel load prescribed by the standard. The specied loading density varies between 7 lb/ft³ and 12 lb/ft3. The moisture content is between 19%
and 25%.
4As measured per CSA B415.1-10 stack loss method.
5Higher Heating Value of the fuel.
6Lower Heating Value of the fuel.
7Optimum overall efciency at a specic burn rate (LHV).
8The optimum heat transfer efciency is for the low burn rate and represents the appliance's ability to convert the energy contained in the wood logs
into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
9This appliance is ofcially tested and certied by an independent agency.
10 Tested and certied in compliance with CFR 40 part 60, subpart AAA, section 60.534(a)(1(ii) and ASTM E3053-17 based on the ALT-125 sent by EPA
on February 28th, 2018.
11 Carbon monoxide.
Page 6 Installation and Operation Requirements - Solution 1.4
ENGLISH
2.2 Specifications
Recommended log length 16 in (406 mm) north-south
Maximum log length12 17 in (432 mm) north-south
Flue outlet diameter 6 in (150 mm)
Recommended connector pipe diameter 6 in (150 mm)
Type of chimney ULC-S629, UL 103 HT (2100 °F)
Minimum chimney height 12 feet
Baffle material C-Cast
Approved for alcove installation Yes
Approved for mobile home installation13 Yes
Type of door Simple, glazed, with cast iron frame
Type of glass Ceramic glass
Blower Optional (up to 100 CFM)
Particulate emission standard14 EPA / CSA B415.1-10
USA standard (Safety) UL 1482, UL 737
Canada standard (Safety) ULC-S627
12 North-south: ends of the logs visible, East-west: sides of the logs visible.
13 Mobile homes (Canada) or manufactured homes (USA): The US Department of Housing and Urban Development describes “manufactured homes”
better known as “mobile homes” as follows; buildings built on xed wheels and those transported on temporary wheels/axles and set on a permanent
foundation. In Canada, a mobile home is a dwelling for which the manufacture and assembly of each component is completed or substantially
completed prior to being moved to a site for installation on a foundation and connection to service facilities and which conforms to the CAN/CSA-
Z240 MH standard.
14 Tested and certied in compliance with CFR 40 part 60, subpart AAA, section 60.534(a)(1(ii) and draft ASTM WK47329-14. Based on ALT-125
sent by EPA on February 28th, 2018.
Page 7
Installation and Operation Requirements - Solution 1.4
ENGLISH
2.3 Dimensions
2.3.1 Stove Dimensions
10"
254mm
20"
508mm
65/8"
170mm
6"
153mm
11"
280mm
OPTION
Figure 1: Top View
17 7/8"
454mm
87/8"
225mm
10 1/4"
260mm
28 7/8"
732mm
26 7/8"
682mm
27 7/8"
709mm
21"
532mm
22 7/8"
580mm
32 1/4"
819mm
OPTION
Figure 2: Front View Figure 3: Side View
Page 8 Installation and Operation Requirements - Solution 1.4
ENGLISH
2.3.2 Combustion Chamber Dimensions
75/8"
195mm
12"
305mm
Figure 4: Door Opening
14 1/4"
360mm
11 3/4"
298mm
19 1/8"
484mm
5/16"
8mm
3/16"
5mm
Figure 5: Front View - Combustion Chamber Figure 6: Side View - Combustion Chamber
Page 9
Installation and Operation Requirements - Solution 1.4
ENGLISH
2.4 EPA Loading
The loading methods shown below are those that were used during emissions certification.
2.4.1 Air control
The air control is located underneath the ash shelf. To open the
air control, push the air control handle completely to the left
(High). This will increase the burn rate. To close the air control,
push the air control handle completely to the right (Low). This
will decrease the burn rate.
2.4.2 High burn rate (primary air control open)
Open the air control completely. Place six small pieces (2"x2")
of wood in the firebox crossing them at the greatest possible
angle. Criss cross fifteen kindling wood pieces on the small pieces of wood in three layers at the
greatest possible angle. Tie knot with five sheets of paper and place them on top of the kindling
wood. Light up the paper and let the door ajar at 90° until all the kindling wood is on fire and
the first row of small pieces of wood is on fire too. Close the door.
When there is no more fire in the front of the firebox and there are only faint flames on the wood
in the back of the firebox, break ashes, level the coal bed and put four logs in the firebox. Place
the biggest log (about 5"x5") and a medium log (about 4"x4") on the coal bed with a north-south
orientation. Place two other medium logs on the first two with the greatest possible angle. Their
should be air space between each logs and between the logs and the bricks. Let the door ajar
at 90° for approximately two minutes and then close the door.
2.4.3 Medium and low burn rate
On a 2" coal bed that is still slightly red, place five logs of approximatively 4"x4" or 3"x3" with
a north-south orientation. Place three logs on the coal bed and the other two on top with the
greatest possible angle. Their should be air space between each logs and between the logs
and the bricks. Let the door ajar at 90° for approximately 5 min. Then, close the door with the
primary air control open. Leave to burn with the primary air control open for approximately 10
minutes and then close the primary air control completely for the low burn rate and halfway for
the medium burn rate.
Page 10 Installation and Operation Requirements - Solution 1.4
ENGLISH
3. Clearances to Combustible Material
The clearances shown in this section have been determined by tests according to procedures
set out in safety standards ULC S627 (Canada), UL 1482 (U.S.A.) and UL 737 (U.S.A.). When
the stove is installed so that its surfaces are at or beyond the minimum clearances specified,
combustible surfaces will not overheat under normal and even abnormal operating conditions.
No part of the stove or flue pipe may be located closer to combustibles than the minimum
clearance figures given.
The clearances to combustible walls may be slightly different in Canada and the U.S.A. and may
also differ depending on whether single or double wall flue pipe is used. Make sure to choose
the correct clearance for the stove location and type of flue pipe.
The clearances of the appliance and the flue pipes must be met individually, meaning the appliance
cannot be installed closer to the combustible materials than the single or double wall pipe allows.
For a safe way to reduce clearances refer to section"5. Reducing Wall and Ceiling Clearances Safely"
of this manual.
3.1 Clearances
APPLIANCE CLEARANCES WITH SINGLE
WALL PIPE CONNECTOR
APPLIANCE CLEARANCES WITH DOUBLE
WALL PIPE CONNECTOR
Canada USA Canada USA
A14" (356 mm) 12" (305 mm) A6" (152 mm) 6" (152 mm)
B12" (305 mm) 12" (305 mm) B12" (305 mm) 12" (305 mm)
C11" (279 mm) 11" (279 mm) C6" (152 mm) 6" (152 mm)
If the above clearances are met, then the distances measured from the flue outlet will be:
DISTANCES13 FROM PIPE CONNECTOR
WITH SINGLE WALL PIPE CONNECTOR
DISTANCES5 FROM PIPE CONNECTOR
WITH DOUBLE WALL PIPE CONNECTORE
Canada USA Canada USA
D18" (457 mm) 16" (406 mm) D9 ¼" (235 mm) 9 ¼" (235 mm)
E18" (457 mm) 18" (457 mm) E18" (457 mm) 18" (457 mm)
F18" (457 mm) 18" (457 mm) F12 7/8" (327 mm) 12 7/8" (327 mm)
15 The pipe distances listed in this table refer to the distances obtained when the stove is installed in accordance with the appliance clearances
above mentioned.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Enerzone Poêle à bois
Enerzone
Enerzone Solution 1.6 AGENCY PHASE II CERTIFIED WOOD Manuel utilisateur
Enerzone
Enerzone Solution 1.6 Manuel utilisateur
Enerzone
Enerzone Harmony 2.3 Manuel utilisateur
Enerzone
Enerzone EB00002 Manuel utilisateur
Enerzone
Enerzone Solution 1.3 Manuel utilisateur
Enerzone
Enerzone Solution 2.3 EB00012 Manuel utilisateur
Enerzone
Enerzone Euromax EP00070 Manuel utilisateur
Enerzone
Enerzone Destination 1.6 Manuel utilisateur
Enerzone
Enerzone Solution 2.3 Manuel utilisateur
Enerzone
Enerzone Solution 1.6 AGENCY PHASE II CERTIFIED WOOD Manuel utilisateur
Enerzone
Enerzone EB00032 Manuel utilisateur
Enerzone
Enerzone Solution 2.3 Manuel utilisateur
Enerzone
Enerzone Solution 2.9 Manuel utilisateur
Enerzone
Enerzone SOLUTION 1.7 Manuel utilisateur
Enerzone
Enerzone Solution 1.6 AGENCY PHASE II CERTIFIED WOOD Manuel utilisateur
Enerzone
Enerzone Solution 3.4 Manuel utilisateur
Enerzone
Enerzone EB00060 Manuel utilisateur
Enerzone
Enerzone Solution 2.3 Manuel utilisateur
Enerzone
Enerzone EB00041 Manuel utilisateur
Enerzone
Enerzone SOLUTION 3.3 Manuel utilisateur
