EnerSys Alpha SE41-2722 Guide de démarrage rapide

SE41-2722/2730

Multipurpose Enclosure Series

Technical Guide: 0290002-J0

Effective:07/2020

SE41-2722/2730

Multipurpose Enclosure Series

For technical support, contact Alpha Technologies:

Canada and USA: 1-888-462-7487

International: +1-604-436-5547

Alpha shall not be held liable for any damage or injury involving its enclosures, power

supplies, generators, batteries, or other hardware if used or operated in any manner or

subject to any condition inconsistent with its intended purpose, or if installed or oper-

ated in an unapproved manner, or improperly maintained.

Photographs contained in this manual are for illustrative purposes only. These photo-

graphs may not match your installation.

NOTE:

Operator is cautioned to review the drawings and illustrations contained in this manual

before proceeding. If there are questions regarding the safe operation of this powering

system, contact Alpha Technologies or your nearest Alpha representative.

NOTE:

Services, Inc.

No part of this documentation shall be reproduced, stored in a retrieval system, translated, transcribed, or transmit-

ted in any form or by any means manual, electric, electronic, electromechanical, chemical, optical, or otherwise

without prior explicit written permission from Alpha Technologies.

This document, the software it describes, and the information and know-how they contain constitute the proprietary,

conﬁdential and valuable trade secret information of Alpha Technologies, and may not be used for any unauthorized

purpose, or disclosed to others without the prior written permission of Alpha Technologies.

The material contained in this document is for information only and is subject to change without notice. While

reasonable efforts have been made in the preparation of this document to assure its accuracy, Alpha Technologies

assumes no liability resulting from errors or omissions in this document, or from the use of the information contained

herein. Alpha Technologies reserves the right to make changes in the product design without reservation and with-

out notiﬁcation to its users.

0290002-J0 Rev G

Table of Contents

1. Safety....................................................................................................................................4

1.1 Safety Symbols.......................................................................................................................... 4

1.2 General Warning and Cautions.................................................................................................. 4

1.3 Electrical Safety......................................................................................................................... 5

1.4 Battery Safety ............................................................................................................................ 5

2. Introduction...........................................................................................................................6

2.1 Product Overview....................................................................................................................... 6

3. Specications........................................................................................................................7

4. Features................................................................................................................................8

4.1 AC and DC Power Options ........................................................................................................ 8

5. Site Evaluation and Pre-Installation......................................................................................9

5.1 Site Selection............................................................................................................................. 9

5.2 Tools Required........................................................................................................................... 9

6. Installation...........................................................................................................................10

6.1 Safety Precautions................................................................................................................... 10

6.2 Plinth Mount Kit for Concrete Pad ........................................................................................... 10

6.3 Wall Mounting the Enclosure ................................................................................................... 12

6.4 Pole Mounting the Enclosure................................................................................................... 13

7. Wiring..................................................................................................................................14

7.1 Grounding the Enclosure......................................................................................................... 14

7.2 AC Input Wiring to the Load Center......................................................................................... 15

8. Maintenance .......................................................................................................................17

8.1 Heat Exchanger Fan Test Procedure....................................................................................... 18

8.2 Heat Exchanger Fan Replacement Procedure........................................................................ 19

8.3 Cooling Fan Test Procedure .................................................................................................... 22

8.4 Cooling Fan Replacement Procedure...................................................................................... 22

9. Warranty Statement and Service Information.....................................................................25

9.1 Technical Support .................................................................................................................... 25

0290002-J0 Rev G

9.2 Warranty Statement................................................................................................................. 25

9.3 Product Warranty..................................................................................................................... 25

9.4 Battery Warranty...................................................................................................................... 25

9.5 Warranty Claims....................................................................................................................... 25

9.6 Service Information.................................................................................................................. 25

10. Acronyms and Denitions .................................................................................................26

11. Certication .......................................................................................................................27

List of Figures

Figure 1 — Alpha SE41 Interior View ............................................................................................... 6

Figure 2 — Plinth Template for Mounting Bolts............................................................................... 10

Figure 3 — Preparing Enclosure for Wall Mounting........................................................................ 12

Figure 4 — Bolting the Pole Mount Rail to the Cabinet Brackets ................................................... 13

Figure 5 — Mounting the Bracket/Rail to the Pole.......................................................................... 13

Figure 6 — Enclosure MGB and Chassis Ground.......................................................................... 14

Figure 7 — Main Breaker Load Center Wiring................................................................................ 15

Figure 8 — Main Lug Load Center Wiring ...................................................................................... 15

Figure 9 — Enclosure Alarm Block Wiring...................................................................................... 16

0290002-J0 Rev G

1. Safety

SAVE THESE INSTRUCTIONS: This manual contains important safety instructions that must

be followed during the installation, servicing, and maintenance of the product. Keep it in a safe place. Review the

drawings and illustrations contained in this manual before proceeding. If there are any questions regarding the safe

installation or operation of this product, contact Alpha Technologies or the nearest Alpha representative.

1.1 Safety Symbols

To reduce the risk of injury or death, and to ensure the continued safe operation of this product, the following sym-

bols have been placed throughout this manual. Where these symbols appear, use extra care and attention.

The use of ATTENTION indicates specic regulatory/code requirements that may a󰀨ect the

placement of equipment and /or installation procedures.

WARNING!

WARNING presents safety information to PREVENT INJURY OR DEATH to personnel.

Warnings are indicated by a shock hazard icon, the word WARNING, and a rule beneath

which the information appears.

WARNING!

You must read and understand the following warnings before installing the enclosure

and its component. Failure to do so could result in personal injury or death.

CAUTION!

CAUTION indicates safety information intended to PREVENT DAMAGE to material or equipment.

Cautions are designated with a yellow warning triangle, the word CAUTION, and a rule beneath

which the information appears.

NOTE:

A NOTE provides additional information to help complete a speciﬁc task or procedure. Notes

are designated with a checkmark, the word NOTE, and a rule beneath which the information ap-

pears

HOT!

The use of HOT presents safety information to PREVENT BURNS to the technician or

user.

1.2 General Warning and Cautions

• Read and follow all instructions included in this manual.

• Only trained personnel are qualiﬁed to install or replace this equipment and its components.

• Use proper lifting techniques whenever handling equipment, parts, or batteries.

0290002-J0 Rev G

1.3 Electrical Safety

Before working with any live battery or power system, follow these precautions:

a. Remove all metallic jewelry, such as watches, rings, metal rimmed glasses, or necklaces.

b. Wear safety glasses with side shields at all times during the installation.

c. Use OSHA approved insulated hand tools. Do not rest tools on top of batteries.

WARNING!

Lethal voltages are present within the power system. Always assume that an electrical

connection or conductor is energized. Check the circuit with a voltmeter with respect to the

grounded portion of the enclosure (both AC and DC) before performing any installation or

removal procedure.

WARNING!

Follow battery manufacturer’s safety recommendations when working around battery systems.

Do not smoke or introduce an open ﬂame when batteries (especially vented batteries) are

charging. When charging, batteries vent hydrogen gas, which can explode.

WARNING!

Hazardous voltages and/or energy levels can be present at the input of power systems. The DC

output from rectiﬁers and batteries, though not dangerous in voltage, has a high short-circuit

current capacity that may cause severe burns and electrical arcing.

• Do not work alone under hazardous conditions.

• A licensed electrician is required to install permanently wired equipment. Input voltages can range up to

240 Vac. Ensure that the utility power is disconnected and locked out before performing any installation or

removal procedure.

• Ensure that no liquids or wet clothes come into contact with internal components.

• Hazardous electrically live parts inside this unit are energized from the batteries even when the AC input

power is disconnected.

• The enclosure which contains the DC or AC power system along with customer installed radios must remain

locked at all times, except when authorized service personnel are present.

• Always assume electrical connections or conductors are live. Turn off all circuit breakers and double-check

with a voltmeter before performing installation or maintenance.

• Place a warning label on the utility panel to warn emergency personnel that a reserve battery source is pres-

ent which will power the loads in a power outage condition or if the AC disconnect breaker is turned off.

• At high ambient temperature conditions, the internal temperature can be hot so use caution when touching

the equipment.

1.4 Battery Safety

• Never transport an enclosure with batteries installed. Batteries must ONLY be installed after the enclosure

has been securely set in place at its permanent installation location. Transporting the unit with batteries in-

stalled may cause a short circuit, ﬁre, explosion, and/or damage to the battery pack, enclosure and installed

equipment.

• Servicing and connection of batteries must be performed by, or under the direct supervision of, personnel

knowledgeable of batteries and the required safety precautions.

• Batteries contain or emit chemicals known to cause cancer and birth defects or other reproductive harm.

Battery post terminals and related accessories contain lead and lead compounds. Wash your hands after

handling batteries.

• Batteries are hazardous to the environment and should be disposed at a recycling facility. Consult the battery

manufacturer for recommended local authorized recyclers.

0290002-J0 Rev G

Door mounted fan

Convenience

receptacle

Adjustable 19/23"

equipment rails

(front-to-back)

Insulation

Master Ground

Bar (MGB)

1.2kW rectier shelf

2. Introduction

2.1 Product Overview

The Alpha SE41 is a NEMA 3R multipurpose outdoor enclosure. The SE41 is available with the following options:

• AC, DC, or line power system

• 22" or 30" depth

• Expansion battery enclosure

• Generator inlet and manual transfer switch

• TVSS

• One or two battery trays

• Battery heater mats

• Thermal management options: fan, heat exchanger or air conditioner

• Enclosure heater

Figure 1 — Alpha SE41 Interior View

Battery tray

0290002-J0 Rev G

3. Specifications

Table A — Specications

Electrical

AC Input AC load center option: 120/240V, 100A maximum, 60Hz, 1PH, 3W+PE

Generator supply option: 120/240V, 30A maximum, 60Hz, 1PH, 3W+PE

Internal power options: CXRF 48-1.2kW rectier shelf:

CXPS-E3 system:

FXM 650-24:

FXM 650-48:

FXM 1100:

FXM 2000:

120/240V, 57A maximum, 60Hz, 1PH

120/240V, 75A maximum, 60Hz, 1PH

8.7/4.5 @120/230 Vac

10.5 @120 Vac

15.5/8 @120/230 Vac

20/12 @120/230 Vac

Internal cooling options: 2000 BTU air conditioner: 120V, 7A maximum, 60Hz, 1PH

4000 BTU air conditioner: 120V, 13.8A maximum, 60Hz, 1PH

Internal heating options: Enclosure fan heater: 120V, 3.5A maximum, 60Hz, 1PH

Enclosure heater mat: 120V, 1.5A maximum, 60Hz, 1PH

Output DC options: CXRF 48-1.2kW rectier shelf:

CXPS-E3 system:

LPS36 converter shelf:

42-58V (48V nominal), 4.8kW maximum

42-58V, (48V nominal), 14.4kW maximum

±190V, 3.6kW maximum (per shelf)

Convenience receptacle: 120V, 15A, 60Hz, 1PH

UPS: FXM650, FXM1100, FXM2000: 120V, 60Hz, 1PH

Mechanical

Dimensions (H x W x D): SE41-2722 (footprint) 1041mm x 686mm x 559mm (41in x 27in x 22in)

SE41-2730 (footprint) 1041mm x 686mm x 762mm (41in x 27in x 30in)

Weight: Fan Heat

Exchanger 2000BTU Air

Conditioner 4000BTU Air

Conditioner

63.5kg (140lbs) 78kg (172lbs) 87kg (192lbs) 110kg (243lbs)

SE41-2722

SE41-2730 71kg (155lbs) 85kg (187lbs) 94kg (207lbs) 117kg (258lbs)

Mounting: Plinth/Pad/Wall/Pole

Construction / Finish: 5052-H32 aluminum / Powder coat

Insulation: Standard

Equipment rails: 23" adjustable front to back (23" to 19" adapter plates available as option)

Equipment space: 20RU

Cable entrance: Knockouts located on sides, bottom and rear of enclosure

Hinge type: 3-position lift-o󰀨 hinge

Door prop: Wind-stop with automatic lock

Door latch: 3-point latch with L-handle for padlocking

Installation access: Full front access as well as rear access with a removable gland plate

HVAC

Cooling options: •Thermostat-controlled ltered fan cooling

• 2000 BTU air conditioner

• 4000 BTU air conditioner

• 50W/°C heat exchanger

Heating options: 500W heater integrated with air conditioner

External 400W fan heater

Environmental

Operating temperature: -40 to 46°C (-40 to 115°F)

Storage temperature: -40 to 85°C (-40 to 185°F)

Compliance

NEMA rating: 3R

UPS Products: UL 1778 and CSAC22.2 107.3

DC Products: UL 60950-1 & CSA C22.2 No. 60950-1

Remote Power Feeding: UL 60950-21 & CSA C22.2 No. 60950-21

0290002-J0 Rev G

4. Features

4.1 AC and DC Power Options

The following options are available for the SE41-2722 and SE41-2730 enclosure. Contact your representative for

system conﬁguration or part numbers.

Basic Enclosure Options

• SE41-2722; Dimensions: H41" x W27" x D22"

• SE41-2730 Dimensions: H41" x W27" x D30"

Power System Options

• Cordex®HP 48-1.2kW Front Access Rectiﬁer Shelf

• Line Power System; LPS 36

• AC UPS; FXM 650

• AC UPS; FXM 1100

• AC UPS; FXM 2000

Cooling and Heating Options

• Heat Exchanger, 50w / deg C, Thermostat Controlled

• 2000 BTU Air Conditioner

• 4000 BTU Air Conditioner

• Fan Cooled, Thermostat Controlled, MERV 6 Filter

• Heater; 400 Watt AC Powered Heater

AC Input Options

• AC Load Center, 100A 120/240Vac (L-N-L +G) with Main Lug

• AC Load Center, 100A 120/240Vac (L-N-L +G) with 100A 2P Main Circuit Breaker

• Transient Voltage Surge Suppressor: 120/240VAC Split Phase, 40k AIC

• Generator Receptacle: 30A AC Twist Lock, NEMA L14-30, Hubbel HBL2715SW

Battery Trays / Enclosure Options

• One Battery Tray

• Two Battery Tray

• Battery Base with One Battery Tray

Accessories

• Pole Mount Kit

• Wall Mount Kit

• Plinth, 4"

• Concrete Barrier

• Battery Heater Mat

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels EnerSys Enceinte

EnerSys

EnerSys Alpha SE48-1616 Manuel utilisateur

EnerSys

EnerSys Alpha TE33-1820 Mode d’emploi

EnerSys

EnerSys Alpha SE41 Mode d’emploi

Manuels Enceinte populaires d'autres marques

SilentiumPC

SilentiumPC Armis AR5 Manuel

Pulsar

Pulsar 17/TRP80/DSPR Manuel utilisateur

Thermaltake

Thermaltake V150 TG Manuel utilisateur

MSI

MSI MPG SEKIRA 500X Manuel utilisateur

Antec

Antec Dark fleet DF-10 Manuel utilisateur

Nexans

Nexans WTC05 Manuel utilisateur

Peavey

Peavey DS 1502 Manuel utilisateur

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manuel utilisateur

Rosewill

Rosewill RX82-U(JBOD) Manuel utilisateur

QNAP

QNAP SAS JBOD CLI 1.0 Manuel utilisateur

GAMDIAS

GAMDIAS Talos P1 Manuel utilisateur

Auvs

Auvs KR615 Manuel utilisateur

Digitus

Digitus DA-71114 Manuel utilisateur

CommScope

CommScope FDH 3000 Manuel utilisateur

FS FHD-FWME4 Manuel utilisateur

JBL

JBL CS1215T Manuel utilisateur

Pulsar

Pulsar ARAD-S4 Manuel utilisateur

Pulsar

Pulsar AWO454 Manuel utilisateur

EnerSys alpha SE41-2722 Guide de démarrage rapide

Manuels Enceinte populaires d'autres marques