Energie Eco Manuel utilisateur

EN TECHNICAL MANUAL

200esm | 250esm | 300esm

300esms

250i | 300i |250is | 300is |500is

250ix | 300ix

250isx | 300isx | 500isx

Review 13

Version 0

Date 09/01/2020

Directives

2006/95/CE

European Certification

EN 60335-1

EN 60335-2-21

EN 60335-2-40

ECO

Esteemed Client,

We would like to thank you for your choice when you acquired an

equipment for sanitary water heating.

The thermodynamic solar system ECO will surely meet all your expec-

tations and provide many years of comfort with maximum power sav-

ing.

Our organization dedicates much time, energy and economic resourc-

es in order to develop innovations that will promote power saving in

our products.

Your choice has demonstrated your good sense and concern with pow-

er consumption, a matter that aects the environment.

We have taken on a permanent commitment to conceive innovative

and ecient products so that this rational use of energy can actively

contribute to the preservation of the environment and natural resourc-

es of the planet.

Keep this manual whose objective is to inform, alert and advise about

the use and maintenance of this equipment.

Our services are always at your disposal. Feel free to call upon us!

Technical Manual

English

ECO

INDEX

1.IMPORTANT.................................................................................................................

1.1. Symbols .......................................................................................................................

1.2 Pre-installation Information .................................................................................

1.3 Safety information ...................................................................................................

2.PACKAGE .......................................................................................................................

2.1. Contents .......................................................................................................................

2.2. Transpor ......................................................................................................................

3.SPECIFICATIONS ...........................................................................................................

3.1. Running principle ..................................................................................................

3.2. Technical features ...................................................................................................

3.3. Technical features ...................................................................................................

3.4. Main Components ...................................................................................................

3.4.1. General diagram of assembly .................................................................

3.4.2. Thermodynamic Solar Panel ..................................................................

3.4.3. Storage Water Heater ...............................................................................

3.4.4. Thermodynamic Block .............................................................................

3.4.5. Cooling Fluid .................................................................................................

3.5. Safety and Control Devices ...............................................................................

3.5.1. Pressure gauge of high/low pressure .................................................

3.5.2. Safety Thermostat ......................................................................................

3.5.3. Temperature Sensor ...................................................................................

3.5.4. Protection against corrosion .................................................................

3.5.5. Bipolar Socket ...............................................................................................

3.5.6. Expansion Vessel .........................................................................................

3.5.7. Safety Device .................................................................................................

3.5.8. Pressure Reducing Valve .........................................................................

4.INSTALATION ............................................................................................................

4.1. AttachmentofPanel................................................................................................

4.2.Set-upoftheStorageWaterHeater......................................................................

4.3. InstallationofThermodynamicBlock................................................................

4.4. RefrigerantConnections........................................................................................

4.4.1. Connection to the Panel (x1) .....................................................................

4.4.2. ConnectiontothePanels(x2)....................................................................

Technical Manual

English

ECO

English

4.4.3. Connection of Thermodynamic Block and Storage Water

Heater ............................................................................................................................

4.4.4. Connection of Thermodynamic Block and Thermodynamic

Panel ..............................................................................................................................

4.4.5. Load of Nitrogen .........................................................................................

4.4.6. Create Vacuum ............................................................................................

4.4.7 Load of Complementary Cooling Fluid .............................................

4.4.8. Checking good running condition .....................................................

4.5. Hydraulic Couplings ..............................................................................................

4.6. Electric Connections ............................................................................................

5.FIRST USE .........................................................................................................................

5.1. Filling the tank ..........................................................................................................

5.2. Start-up of the System .........................................................................................

6.SYSTEM OPERATION .................................................................................................

6.1. Control Panel ..............................................................................................................

6.2. Keys (Functions) ....................................................................................................

6.3. Description ................................................................................................................

6.4. Symbols ......................................................................................................................

6.5. Operating Modes ....................................................................................................

6.5.1. ECO Operating Mode ................................................................................

6.5.2. AUTO Operating Mode .............................................................................

6.5.3. BOOST Operating Mode .........................................................................

6.6. Extra Functions .......................................................................................................

6.6.1. DISINFECT Function ..................................................................................

6.6.2. HOLIDAYS Function ..................................................................................

6.6.3. PVFunction ....................................................................................................

7.SYSTEM MENU ...............................................................................................................

8.PARAMETERS DESCRIPTION .................................................................................

9.TABLE OF ERRORS .....................................................................................................

10.GRAPHIC OF PROBES ..............................................................................................

11.RESOLUTION OF PROBLEMS ................................................................................

12.SYSTEM MAINTENANCE .........................................................................................

12.1. General Inspection ...............................................................................................

12.2. Magnesium Anode ...............................................................................................

12.3. Cleaning Filter of Throttle Valve .....................................................................

12.4. Safety Thermostat ................................................................................................

12.5. Empty the Storage Water Heater ................................................................

Technical Manual

ECO

1. IMPORTANT

1.1. Symbols

Every process that the suppli-

er believes to be conducive to

harmful danger and/or material

damage, will be signalled with a

danger sign.

For a better characterization of

the danger, the symbol will be

followed by one of these words:

• DANGER: when there is the

possibility of harm to the op-

erator and/or people in the

vicinity of the equipment.

• WARNING: when there is

the possibility of material

damage to the equipment

and/or attached materials.

All the information that the sup-

plier believes to be an asset for

better performance and pres-

ervation of the equipment, will

be signalled together with the

information sign.

1.2 . Pre-installation Information

1.3 . Safety information

WARNING / DANGER

The electrical installation of the equipment

must comply with the national regulations

for electrical installations in eect.

ECO will only operate after receiving its

load of coolant.

The maximum water pressure into the hy-

draulic circuit inlet is 0.3 Mpa and the min-

imum pressure is 0.1 MPa.

The power supply is 230 V, 50 Hz, and the

power supply cable is plugged into a sock-

et with earth wiring.

If the power supply cable is damaged, it

must be replaced by the manufacturer, by

its customer service, or by sta with similar

training in order to avoid any danger.

ECO will only operate if the storage water

heater is lled with water.

This device can be used by 8

year old children and older, or

people with physical, sensorial

or mental handicaps, or lacking

experience / knowledge, if they

received training regarding the

running of the device in a safe

way and are aware of the dan-

gers involved.

Children must not play with the

appliance.

DANGER

When installing:

• The installation of a thermodynamic

equipment for heating sanitary wa-

ter must be carried out by sta with

suitable training and qualied for

this purpose;

• The device should not be installed in

places that present a risk of impact,

shock or explosion;

• Keep the equipment packed until

you reach the place and moment of

installation;

• Make sure all hydraulic couplings are

watertight before connecting the

equipment to the power supply.

Maintenance of the equipment:

• Equipment maintenance should be

carried out by customer service, ex-

cept operations of general and con-

tinuous cleaning which could/should

be carried out by the user;

Technical Manual

English

ECO

• Power supply to the equipment

must be disconnected when doing

maintenance operations;

• The supplier recommends at least

one annual inspection to the equip-

ment, by a qualied technician;

• Cleaning and maintenance must not

be carried out by children unless

they are under supervision.

High pressure and temperature:

• The principle for running this equip-

ment is directly linked to high tem-

perature and pressure; thus, the

processes that imply contact with

the equipment must be thought out

with caution to prevent the risk of

burns and projection of material.

Cooling Fluid:

• The cooling uid employed in the

whole process is R134a, CFC-free,

non-inammable and without harm-

ful eects for the ozone layer;

• However, according to the law, the

uid in this equipment cannot be re-

leased into the environment;

• Handling of the uid in the equip-

ment must be carried out by a quali-

ed technician.

Information for the Client:

• The Installer must inform the client

about the running of the equipment,

its dangers, rights and duties of the

client.

2. PACKAGE

2.1. Contents

The equipment is supplied in three packages, one for the thermodynamic panel and its

attachment elements, one for the storage water heater and another for the thermodynamic

block together with the hood and elements to attach to the storage water heater.

The packages contain:

I. Thermodynamic panel + its attachment ele-

ments

II. Storage Water Heater

III. Thermodynamic block + attachment ele-

ments

IV. Hood + Electronic panel

V. Installation manual and Warranty

VI. Dielectric joints (except stainless steel tank) I

III

Technical Manual

English

ECO

• Transporting the equip-

ment must be carried out

with an inclination below

;

• The equipment must be

raised and lowered with

extreme care to avoid im-

pact that could damage

the material;

• Make sure the belts and/

or transportation straps do

not damage the material;

• Always use means of trans-

portation suitable for the

equipment (pallet lift, fork-

lift, etc…);

WARNING

2.2. Transport

The equipment must be transported in its

original package to the place of installation.

Check, before beginning transport of the

external unit, if the path you will travel is

unobstructed, in order to prevent collisions

that could cause damage to the device.

The packages contain the following infor-

mation symbols:

Fragile, handle with extreme

caution

Make sure the arrows are al-

ways up

Keep the package dry

Do not stack packages

Technical Manual

English

ECO

3. SPECIFICATIONS

3.1. Running principle

The thermodynamic solar system ECO, is

an equipment based upon the principle of

cooling by compression – Principle of Car-

not – which we designate Thermodynamic

Solar Systems: solar panel and heat-pump.

The solar panel, the main component,

placed outside, is in charge of collecting the

energy from:

• Diuse and direct solar radiation.

• External air, by natural convection.

• The wind eect (almost invariably

available).

• Rainwater.

The temperature gradient caused by the ex-

ternal agents mentioned, ensures the klea

(ecological cooling uid) will evaporate in-

side the solar panel.

The absence of glass in the panel allows for

an increased thermal exchange by convec-

tion.

After circulation in the panel, the klea is as-

pirated by the system’s mechanical compo-

nent, the compressor, which will increase its

temperature and pressure; it is then trans-

ferred to the water circuit through a heat

exchanger.

Before the Klea returns to the solar panel it

is necessary that there should be a narrow-

ing, that is, reduce the pressure and ensure

that it is again in a liquid state, thus com-

pleting the cycle.

The easy way we combine technology with

a law of Nature (change of state of a u-

id), demonstrates the true potential of the

Thermodynamic Solar System - ECO.

Technical Manual

English

ECO

3.2. Technical features (x1 panel)

Technical Manual

English

Unid. 250i 300i 200esm 250esm 300esm 250ix 300ix

HOT WATER CYLINDER

Dry Weight Kg 62 74 73 83 95 69 81

Capacity Kg 250 300 200 250 300 250 300

Internal Protection - Stain. Steel Enamelled Stain. Steel

Cathodic Protection - Magnesium Anode (1”1/4 Female)

Hydraulic

Joints

Water – Inlet and Outlet

inch

3/4” Male

TP Valve 1/2” Female

Recirculation 3/4” Male 1/2” Female

Coil – Inlet and Outlet Not Applicable 1” Male

Maximum Pressure bar 7

Test Pressure bar 10

Maximum Temperature °C 80

Heat Loss (EN 12897) kWh/24h 1,01 1,17 1,04 1,2 1,39 1,01 1,17

Exchanger Output Power1kW Not Applicable a)30,0; b)18,0

THERMODINAMIC

SOLAR PANEL

Material - Solokote Anodized Aluminium

Dimensions (L x W x H) mm 2000 x 800 x 20

Weight kg 8

Max. working pressure bar 12

Test pressure bar 15

Max. exposure temp. °C 120

Min. running temperature °C - 5

Min. exposure temp. °C - 40

THERMODYNAMIC

BLOCK

Width / Height / Depth mm 320 / 710 / 280

Weight kg 17,5

Absorbed power (Med/Max) W 390 - 550

Thermal power (Med/Max) W 1690 / 2900

Electrical Backup Power W 1500

Compressor Type - Hermetic

Compressor Noise Level dB 39

Refrigerant / Qt.2- / g R134a / 11002

Piping Material - Copper (DHP ISO1337)

Line (Liq. | Asp.) inch 1/4” | 3/8”

Power Supply V / Hz 230 Monophase / 50

Fuse (Main | Elect. Heater) A 10 | 10

Performance

Coecient

(COP) 3

EN 255 – 3 (air 7 °C / air 20 °C) 3,4 / 4,6 3,3 / 4,5 3,4 / 4,6

EN 16147 (air 7 °C) 2,9 3,0 2,8 2,9 3,0 2,9 3,0

Amount of Useful Water at 40 °C lts 349 389 247 349 389 342 382

1. a) Primary (Tin=90 °C; Tout=80 °C); Production DHW (Tin=10 °C; Tout=60 °C)

b) Primary (Tin=70 °C; Tout=60 °C); Production DHW (Tin=10 °C; Tout=60 °C)

2. The amount of uid must be checked by the installer. In some cases it is necessary to add

or remove uid in order to ensure the correct running of the system.

3. Water temperature from 10 °C to 54 °C

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Energie Onduleur

Energie

Energie ECO 200i Manuel utilisateur

Energie

Energie ECO100esm Manuel utilisateur

Energie

Energie Aquapura HT 14 Manuel d'utilisation

Energie

Energie Solar Block ULTRA Manuel d'utilisation et d'entretien

Energie

Energie Aquapura 14 HT Manuel d'utilisation

Manuels Onduleur populaires d'autres marques

Fourgroup

Fourgroup Easy Manuel utilisateur

Velleman

Velleman PI300M Manuel utilisateur

Sungrow

Sungrow SG350HX-US Manuel utilisateur

WilTec

WilTec 61897 Manuel utilisateur

SMA

SMA SUNNY BOY STORAGE 2.5 Manuel utilisateur

Simplicity

Simplicity LANDLORD 316 Manuel utilisateur

Santak

Santak SMAX 3000 Manuel utilisateur

ATON

ATON RA.Store-3 Manuel utilisateur

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manuel utilisateur

Tektronix

Tektronix CFG250 Manuel utilisateur

Champion

Champion 200989 Manuel utilisateur

Vanner

Vanner 20-500 Series Manuel utilisateur

GE GEP Manuel utilisateur

Astrel Group

Astrel Group Power Reducer Guide rapide

MULTIQUIP

MULTIQUIP GDP-5H Mode d’emploi

GoWISE

GoWISE PS1007 Manuel utilisateur

Promate

Promate PM13500D ES Manuel utilisateur

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manuel utilisateur