ENER-J S-71918 Manuel utilisateur
Monitor your Home,
Remotely!
Installation
Guide
Languages
Make your home smart & connected in simple steps with ENER-J
ENERJSMART
ANDROID iOS
Download our
app from
To download,
scan the QR code
1
Please read it carefully before using the product, and keep this handy.
Smart LED Floodlight Camera Accessories User Manual
ENGLISH
1) What’s in the box?
2) Specication
Floodlight
Camera Lens
Motion Sensor Back view with
Junction Box
2
SKU SHA5293-94
Model S-71918
Power 35W (whole light),
30W (LED power)
Material Aluminum + PC + ABS
Input Voltage 100-240V
LED 96*2835
Luminous Flux 2200lm (+/-10%)
Color Temp 6500k (+/-500K)
Protection Grade IP44
Motion Sensor Detection Angle 270°
Max Sensor Distance 12m
PIR Sensor 20-20000lux
Light time 3s-7mins
Night Vision 11 IR LED
Resolution 1920*1080(HD), 640*480(VGA)
Image Sensor 1/4 HD CMOS
Lens 3.6mm f2.0 (270°(H), 100°(V))
TF Card Support Upto 128GB
Colour White / Black
Weight 920gm
Size 153*231*303mm
• Crystal-clear HD Video.
• Two ultra-bright LED oodlight. Motion-activated camera and
oodlights.
• Security siren alarm.
• Ultra wide-angle motion sensors.
• App controlled camera, lights & siren.
• Smart zoom with panning.
3) Key Features
3
5) Set up
6) Install App
Connect the Smart Floodlight Camera to the mains:
Kindly power the oodlight camera. After 10 seconds, the speaker
starts; after 15 seconds, the infrared sensor starts detecting; after 20
seconds, the infrared PCBA red LED lights up and blinks rapidly; after
30 seconds, the PTZ starts detection, rst left and right, then Up and
down; after 40 seconds, you will hear the message Device Ready to
Pair.
Open App Store (for iOS) or Google Play (for Android) on your
device, search “ENERJSMART” or scan the QR code as folllowing to
download the right App for your device.
Please follow below instruction to setup and use your Smart LED
Floodlight Camera device.
1. Downloading and installing the APP
4) Light Operation
The spotlight has 2 dierent control dials which allows you to adjust
the settings, these control dials are located underneath the light body.
1) Turn the control knob TIME to adjust the duration of the
illumination. The lighting duration can be adjusted from approx.
3 seconds to 7 minutes (+/-10%).
2) Turn the control knob LUX to adjust the daylight level: At the
position , the motion detector only reacts at night. In the
position , the motion detector only reacts at daylight.
• Add other ENER-J smart products on the same app.
• Supports up to 128GB MicroSD card that never lets you miss any
thing (TF card not included).
4
ENERJSMART
ANDROID iOS
This device only supports 2.4GHz frequency band router (5G not
supported). When you set your WiFi password, please ensure you
do not use any special characters such as ~!@#$%^&*(). At the time
of pairing the device, please ensure your smart phone and Smart
Floodlight Camera are both in close proximity to your WiFi router to
enable Quick Pairing.
Before you begin;
► Make sure the ENERJSMART App is installed to you device.
► Make sure that your device is connected to a 2.4GHz Wi-Fi
networkds, 5GHz network is NOT compatible.
New users need to register according to the steps advised. Existing
users need to login using their registeration details.
Setup router
2. Setting up the APP
User Register
Please keep network available
5
1. Please follow the instructions and make sure the password is
entered correctly.
2. One device can only be added with one App account, if the device
has been added with another account already, then it can’t be
added to any another account again.
3. The device will unbind from previous account after being deleted
from App. Further, the device will reset automatically once from
blue light to red light.
7) QR Code Conguration
Getting Started
Process
6
Step 1: Open the ENERJSMART App, click “+” or “Add Device”. Then
select “All” on the “Select Device Type” page.
Step 2: Select “Security Camera”. Power the device on and wait till
you hear the prompt ‘Device in Conguration Mode’.
7
Step 3: Input your Wi-Fi password and click “Conrm”, scan the QR
Code on your phone screen by aiming at the device camera.
(Ensure the WiFi Network Selected is your WiFi Router
Name).
About 20cm
8
Step 4: Click “I heard the beep” when the device makes a Beep
Sound or you hear the message Device connected
successfully. Once you press Complete, device will pair in a
few seconds.
Step 5: The device is added, and the device nickname can also be
changed in the interface.
Each camera can only be connected to one ENERJSMART account
(for example, if the A camera has been bound to the A account, the
8) Note
9
Q : The device cannot be previewed properly?
A : Check whether the network is normal (2.4GHz). Ensure that you
have placed the camera close to the wi router, and still if you
face issues then it is recommended to reset the device and add
it again.
Q : Why is it still in the list of devices after resetting?
A : The reset device only resets the network conguration of the
camera, but cannot change the conguration on the App, remove
the camera, and must be deleted by the App.
Q : How to cut the camera network to another router?
A : First remove and reset the device on the App and then congure
the device again by the App.
Q : Why doesn’t the device identify the SD card?
A : It is recommended to plug in SD card after the power to the
camera is o. Conrm whether the SD card is normally available
and the format is FAT32. Please note that the TF card can’t be
identied when the internet connection speed is not good.
Q : Why I can’t get the notications on my phone App?
A : Please conrm that the App has been running on the phone,
and the relevant reminder function has been opened; Message
notication and authority conrmation in the mobile phone
system have been opened.
9) FAQ
A camera will not be able to bind to the B account or the C account).
If other users want to connect to the Smart Floodlight camera, the
primary user needs to share the camera with other users. If you wish
to change the account, the corresponding camera in the A account
needs to be deleted, restore the camera to the factory settings, then
follow the same steps for connecting from the beginning.
Ce manuel convient aux modèles suivants
1
Table des matières
Langues :
Autres manuels ENER-J Appareil photo numérique
