Eneo IPB-62M2712M5A Manuel utilisateur
EN
User Manual
1/2,8" Network Camera,
1920x1080, Day&Night, DOL-WDR,
2,7-12mm, Infrared, IP66
IPB-62M2712M5A
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
To prevent electric shocks and risk of fire hazards, do NOT use other than
specific power source.
Warning :
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
Caution :
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority
to opera te the equipment.
Mains power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power mains interruptions, it is
recommended that the model be powered from an uninterruptible power supply
(UPS) or a battery.
The symbol is intended to alert the user to the presence of important
operating and maintenance(servicing) instructions in the literature
accompanying the unit.
The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
Safety Precaution
03
MEGA-PIXEL NETWORK CAMERA
Safety Precaution
04
NOTICE
• The image used in this instruction manual are processed to help comprehension
and may differ from actual video of the camera.
• Avoid installing areas where has shock or vibration which results in the problems.
• Pay attention to safety when laying the connection cable and observe that the cable
is not subjected to heavy loads, kinks or damage and no moisture can get in.
• Never open the device such as boards or lens.
The warranty becomes void if repairs are undertaken by unauthorized persons.
• Maintenance and repair have to be carried out only by authorized service centers.
• Use only a mild detergent to clean the housing body.
• The camera should never be operated beyond the technical specifications.
This can lead to destruction.
• The camera should never be operated in water.
MEGA-PIXEL NETWORK CAMERA
Contents
05
MEGA-PIXEL NETWORK CAMERA
Safety Precaution . . . . . . . . . . . . . . . . . . . . 03~04p
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05p
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06p
Composition . . . . . . . . . . . . . . . . . . . . . . . . . . . 07p
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 07p
Part Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08p
Installation Instructions . . . . . . . . . . . . . . . . 09~11p
Operating Instructions . . . . . . . . . . . . . . . . . 14~17p
. . . . . . . . . . . . . . . . . . . . . . . . . 12~13p
Specifications
2-1. Information
2-2. Video & Image
2-3. Event
2-4. System
1. LIVE VIEW
2. SETUP
Full Menu Setup . . . . . . . . . . . . . . . . . . . . . 18~58p
........................................................ 18p
............................................... 20p
......................................... 20p
Troubleshooting . . . . . . . . . . . . . . . . . . . . . 59~60p
.............................................................. 20p
........................................................ 36p
...................................................... 48p
Features
06
MEGA-PIXEL NETWORK CAMERA
• Full-HD 2.16Mega Pixel, NETWORK CAMERA, 1920x1080(30/25p)
• The best low light performance with SONY’s STARVIS sensor
• ONVIF Conformance
• ONVIF Event Mapping
• Zero configuration
• Cross Web Browsing (IE, Edge, Safari, Firefox, Chrome)
• Adaptive web resizing depending on layout & resolution of
display device by RESPONSIVE WEB
• Increased usability for all PC, tablet and mobile
• Simultaneously H.265(+), H.264(+) & MJPEG (Multi streaming)
• f=2.7~12mm, Motorized vari-focal lens
• Motorized Zoom & Focus Adjustment
• DOL WDR (Digital Overlap Wide Dynamic Range)
• D-WDR (Digital Wide Dynamic Range)
• Improved noise figure with the enhanced 3DNR
• LDC(Lens Distortion Compensation)
• Smart Stream, ROI(Region of Interest)
- Enables to process video data smartly according
to users demand.
- Available to deliver high quality video on interested
region while less quality video on non interested region.
- Lowering overall bandwidth and reduce the storage burden
• Privacy Mask, Motion Detection, Defog, HLC/ BLC,
Digital Zoom(~x10), Mirror/Flip, Contrast, Brightness, Hue,
Saturation, Sharpness, DIS (Digital Image Stabilization)
• Circuit protection against faulty connection in power polarity
• Built-in 4pcs High power SMD LEDs
• Cooling Fan & Optimized Heat sink System
• PoE(IEEE Std. 802.3af) & DC12V
• Combination of Aluminum Cast & PC(Polycarbonated)
• Dual window for protecting IR reflection
• One touch 3-Axis locking bracket
• IP66 Protection
Composition
07
Dimension
MEGA-PIXEL NETWORK CAMERA
Plastic Anchor:
6 x 30mm (3pcs)
Mounting
Template
Operating
Instruction
Camera
Ø66
Ø78.5
120
135
214
199
Mounting Screw:
3.5 x 25mm (3pcs)
Part Names
08
MEGA-PIXEL NETWORK CAMERA
DUAL WINDOW
SUNSHIELD BOLT
SUNSHIELD
FRONT CASE
BRACKET
REAR CASE
• Extreme care should be taken NOT to scratch the surface of window while
the camera installing or adjusting.
• Care should be taken the cable is NOT to be damaged, kinked or exposed in
the hazardous area.
• Do not expose the camera directly to a strong light source such as the sun or
spot light.
CAUTION
POWER
CABLE
Case
Open
• When assembling the front case, be sure that a Rubber sealing is not protrusive.
If the front case is tightened excessively, sealing may not be ensured.
IP Reset
Button
Installation Instructions
09
MEGA-PIXEL NETWORK CAMERA
Mounting Screw
: 4x40mm
1. Locate the mounting template at the installation position and drill the ceiling
or wall if needed.
2. Route the Power cable to the connecting place.
3. Place the camera bracket on pre-drilled position and fix it through using
mounting screws.
4. Set the camera’s viewing angle by using the driver. (Refer to ‘TIP’ ).
5. Put the sunshield to the camera unit and tighten the sunshield-bolt.
Pan & Tilt adjustments
1) Pan limit:
Pan is limited to +/- 90°.
2) Tilt limit:
Tilt is limited to 0°(2°) min ~ 90° max.
for wall(ceiling) installation respectively
with reference to the wall(ceiling) when
the inclination of camera module is 0°,
that is, the image is aligned horizontally.
90° 90°
Plastic Anchor
: 6x30mm
• Pan: Adjusts view direction
• Tilt: Adjusts view angle
• Inclination: Adjusts view rotation
Installation Instructions
10
MEGA-PIXEL NETWORK CAMERA
Adjustment of viewing angle with 3-Axis bracket.
① Lock/Unlock Screw
② Sub-Lock Screw
3) Inclination limit
(Horizontal image alignment):
Inclination limited to +/-90° max.
• Unlock the Lock/Unlock screw on the camera bracket using the driver.
• Adjust the camera’s viewing angle then lock the Lock/Unlock screw and fix
the sub-lock screw on the other side of bracket.
90°90°
±90°
•on the wall •on the ceiling
Pan
Tilt
Inclination
[ TIP ]
Autres manuels pour IPB-62M2712M5A
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Eneo Caméra de sécurité
Eneo
Eneo IND Series Manuel utilisateur
Eneo
Eneo HDC-2080CS Manuel utilisateur
Eneo
Eneo VKC-900IR36 Instructions d'installation
Eneo
Eneo VKC-1374-1/IR Manuel utilisateur
Eneo
Eneo MEP-62M2812M0A Manuel utilisateur
Eneo
Eneo 213013 Manuel utilisateur
Eneo
Eneo PXB-2080Z03 D Manuel utilisateur
Eneo
Eneo TVD-2080V2812IR Manuel utilisateur
Eneo
Eneo 213021 Manuel utilisateur
Eneo
Eneo VKCD-1331 Instructions d'installation
Eneo
Eneo VKCD-12100F2810IR Manuel utilisateur
Eneo
Eneo HDC-2080Z03 Manuel utilisateur
Eneo
Eneo ISD-55P0010P0A Manuel utilisateur
Eneo
Eneo Fastrax IV EDC-4222 Manuel utilisateur
Eneo
Eneo HDD-2080M2810IR D Manuel utilisateur
Eneo
Eneo INP-58M2812M0A Manuel utilisateur
Eneo
Eneo DOME-WB8 Manuel utilisateur
Eneo
Eneo HDB-2280Z10IR D Manuel utilisateur
Eneo
Eneo IPB-62M2712M5A Manuel utilisateur
Eneo
Eneo EDC-3371 Manuel utilisateur
