1.2009/11/13 初版作製
A4版 (210 ㎜ ×297 ㎜ ) 両面印刷 1C/1C上質紙（四六版 70 ㎏・t0.09 ㎜）
K100%
A-HMR10K
Design and specification are subject to change without notice.
201006
Thank you purchasing the A-HMR10K. The A-HMR10K is designed for Panasonic Portable
Recorder AG-HMR10 when use with A-MWR57. Please read this instruction manual before
use, and keep this instruction manual for reference.
①Attach the Bracket to A-MWR57 as describe in below.
②Use Laulette Screw and tighten as shown below.
Note:Above instruction is for back side. Use the same procedures for front side.
②Use the 4 Bind-head screw
(M3xL8mm)to tighten Bracket and connect a Coupler to
DC Input. For details refer to AG-HMR10 Instruction Manual.
Package Contents
A-MWR57 and Bracket Assembly
D-Tap Connector
D-Tap on Plate side
Minus Plus
DC Cable Connection
①Verify that D-Tap output of A-MWR57 must be 7.3V. Identify "Plus" and "Minus" on
D-Tap. Insert D-Tap connector, and ensure that it is pushed to deeply enough.
7.3V Output
Instruction Manual
Mounting Bracket for AG-HMR10
Front side
Back side
A-MWR57
Bracket
Lower Hole
Upper Hole
Turn Stopper
Screw Hole
Laurette Screw
×1
×4
●Laulette Screw(1/4-20)
●Bind-head Screw (M3 × L8㎜)
●Bracket
●DC Cable
×1
×1
A-MWR57
AG-HMR10
Bracket
Coupler Cable
Bind-head Screw (4)
Coupler
DC terminal
