Endress+Hauser Flowphant T DTT31 Manuel

TI00125R/09/en

71009492

Technical information

Flow switch

Flowphant®T DTT31, DTT35

Flow switch for safe monitoring of mass flow and temperature in

industrial processes

Application

Flow switch for monitoring and displaying relative mass flow

rates of liquid media in the range from

0.03 to 3 m/s (0.1 to 9.84 ft/s):

Flowphant®T DTT31

−with thread connections or coupling

Flowphant®T DTT35

−with process connections for hygienic applications

Application examples:

• Monitoring cooling water circulation systems of pumps,

turbines, compressors and heat exchangers

• Monitoring pump functionality

• Leak monitoring in process lines

• Monitoring lubrication systems

• Filter monitoring in the beverage industry

Benefits at a glance

This compact flow switch impresses with the latest in

technology being used:

• Practically no pressure loss

• Configuration software ReadWin®2000 or FieldCare for

quick configuration and reliable storage of device settings

• Optional: 4 to 20 mA analog output to read out the flow rate

as percentage value

• Optional: second switch output or 4 to 20 mA analog output

for temperature monitoring

• Function check and process information onsite thanks to

digital display at device

• Top housing section which can be rotated 310° and rotatable

display make it possible to read the measured values in all

orientations

• DTT35: 3-A marked

DTT31, DTT35

2Endress+Hauser

Function and system design

Measuring principle

T09-DTT31xxx-15-xx-xx-xx-000

The device measures the mass flow of a liquid medium with the calorimetric measurement method. The

calorimetric measuring principle is based on cooling a heated temperature sensor. Heat is removed from the

sensor by forced convection due to medium flowing by. The extent of this heat transfer depends on the medium

velocity and the difference in temperature between the sensor and medium (King's law). The higher the

velocity or the mass flow of the medium, the greater the temperature sensor cooling.

Measuring system Overview

Flowphant®

product family

DTT31 DTT35

a0005276 T09-TTR35xxx-14-xx-xx-xx-000

Measurement

probe

RTD RTD

Field of

application

Monitoring of the mass flow of water, water-

like substances and low-viscosity oils.

Monitoring of the mass flow of liquid media

in hygienic processes.

Process

connection

• Compression fitting

•Thread:

−G½" and G¼"

−ANSI NPT ¼" and NPT ½"

•Hygiene:

−Conical metal-metal G½"

−Clamp 1" - 1½", 2"

−Varivent F, N

−DIN 11851

−APV-Inline

Measuring range Mass flow as a relative value between 0 and 100%.

Process measuring limit, liquids: 0.03 to 3 m/s (0.1 to 9.84 ft/s)

DTT31, DTT35

Endress+Hauser 3

DC voltage version

PNP switch output of electronics.

Power supply e.g. with a power supply unit.

Preferably in conjunction with programmable logic controllers (PLC) or for controlling a relay.

a0005373

A: 1x PNP switch output

B: 2x PNP switch output

C: PNP switch output with additional analog output 4 to 20 mA

mTransmitter power supply unit, e.g. RNB130

nLoad (e.g. programmable logic controller, process control system, relay)

o Display e.g. RIA452 or recorder e.g. Ecograph T or Minilog B (at 4 to 20 mA analog output)

mPower supply "Easy Analog RNB130":

Primary switched-mode power supply for sensors. Space saving DIN rail mounting as per IEC 60715.

Wide-range nominal voltage input: 100 to 240 V AC; Output: 24 V DC, max. 30 V in the event of a fault;

Nominal output current: 1.5 A. Connection to monophased a.c. networks or to two phase conductors of three-

phase supply networks.

n Process display RIA452:

If you would like to read off the instantaneous value of the temperature not only locally, but also e.g. directly

from a control room or in the PC network, then one suitable device is the process display RIA452:

Digital process display unit in 96 x 96 mm (3.78 x 3.78 in) panel mounted housing for monitoring and

displaying analog measured values with pump control and batch functions. Multicoloured 7-digit 14-segment

LC display with large bargraph. Configuration and visualisation via RS232 interface and ReadWin®2000 PC

operating software.

o Multi Channel Recorder Ecograph T, Data logger Minilog B:

If you would like to read off the instantaneous value of the temperature not only locally, but also record, analyze

and display it e.g. directly from a control room or in the PC network, then the following devices are suitable:

DTT31, DTT35

4Endress+Hauser

• Multi Channel Recorder Ecograph T

144 x 144 mm (5.67 x 5.67 in) panel mounted housing for electronic acquisition, display, recording,

analysis, remote transmission and archiving of analog and digitalinput signals. Data recording system with

CompactFlash card and multi-coloured LCD display (120 mm / 4.7 in screen size). Configuration and

visualisation via interface (USB, Ethernet, RS232/485) and ReadWin®2000 PC operating software.

• Data logger Minilog B

Battery powered measured value collector with 2 input channels for storing analog and digital values.

Internal memory 128 kB for max. 84000 measured values. Configuration and visualisation via RS232

interface and ReadWin®2000 PC operating software. Optionally with telealarm function.

Input

Measured variable • Flow velocity of liquid media (calorimetric measuring principle)

• Temperature (RTD), optional for two switch outputs or additional analog output

Measuring range • Flow: 0.03 m/s to 3 m/s (0.1 to 9.84 ft/s), as relative value between 0 and 100%; maximum display

resolution: 1%

• Temperature: -20 °C to +85 °C (-4 to +185 °F); display resolution: 1 °C (1 °F)

Output

Output signal DC voltage version: (short-circuit proof version)

• 1x PNP switch output (flow) or

• 2x PNP switch outputs (flow or temperature, adjustable) or

• 1x PNP switch output and 1x 4 to20 mA output, active (flow or temperature, adjustable)

!Note!

The analog output reads out the measured flow rate as relative value in percentage of the adjusted measuring

range.

Signal on alarm Signal on alarm as per NAMUR NE43

• Underranging: Linear drop to 3.8 mA

• Overranging: Linear rise to 20.5 mA

• Sensor break; sensor short-circuit:

≤3.6 mA or ≥21.0 mA (at settings ≥21.0 mA, 21.7 mA output is guaranteed)

• Switch outputs: at safety condition (switch open)

Load Max. (Vpower supply - 6.5 V) / 0.022 A (current output)

Range of adjustment • Switch output

Switch point (SP) and switchback point (RSP) in increments of 1% with min. hysteresis of 5%

• Damping: freely adjustable: 0 = off (no damping) or 10 to 40 s in increments of 1 second

• Unit: %, optional °C, °F (with two outputs and temperature monitoring)

Switching capacity DC voltage version:

• Switch status ON: Ia≤250 mA, switch status OFF: Ia≤1 mA

• Switching cycles: > 10,000,000

• Voltage drop PNP: ≤2 V

• Overload protection

Automatic testing of switching current; output is switched off in case of overcurrent, the switching current

is tested again every 0.5 s; max. capacitance load: 14 μF for max. supply voltage (without resistive load)

Periodic disconnection from a protective circuit in event of overcurrent (f = 2 Hz) and indication of

’Warning’

DTT31, DTT35

Endress+Hauser 5

Inductive load To prevent electrical interference, only operate an inductive load (relays, contactors, solenoid valves) when

directly connected to a protective circuit (free-wheeling diode or capacitor).

Power supply

Electrical connection Plug connection

!Note!

DTT35: Electrical cables must comply with 3-A standard, must be smooth, corrosion resistantand cleanable.

T09-TTR31xxx-04-00-xx-xx-000

A: M12x1 connector

B: Valve connector M16x1.5 or NPT ½"

Device connection

• DC voltage version with M12x1 connector

a0006818

Item No. Output setting Order code (see Ordering information section)

A1 1x PNP switch output DTT3x-A1A*******

A2 2x PNP switch output R1 and m(R2) DTT3x-A1B*******

A2’ 2x PNP switch output R1 and m(diagnosis/NC

contact with "DESINA" setting)

DTT3x-A1B*******

A3 1x PNP switch output and 1x analog output

(4 to 20 mA)

DTT3x-A1C*******

DTT31, DTT35

6Endress+Hauser

• DC voltage version with valve connector M16x1.5 or NPT ½"

P01-PTx3xxxx-04-xx-xx-xx-003

Supply voltage DC voltage version

18 up to 30 V DC (reverse polarity protection)

Current consumption < 100 mA (without load) at 24 V DC, max. 150 mA (without load); with reverse polarity protection

Power supply failure • Behaviour in case of overvoltage (> 30 V)

The device works continuously up to 34 V DC without any damage.

No damage is caused to the device in case of a short-term overvoltage up to 1 kV (as per EN 61000-4-5).

The specific properties are no longer guaranteed if the supply voltage is exceeded.

• Behaviour in case of undervoltage

If the supply voltage drops below the minimum value, the device switches off (status as if not supplied with

power = switch open).

Performance characteristics

The percentage information in the "Performance characteristics" section refers to the full scale value or the set

maximum value (100% value) of the monitoring range.

Reference operating

conditions

As per DIN IEC 60770 or DIN IEC 61003

T = 25 °C ± 5 °C (77 °F ± 9 °F), relative humidity 45 to 75 %, ambient air pressure 860 to 1060 kPa

(124 to 153 PSI), water test medium. Supply voltage U = 24 V DC.

Maximum measured error Flow

The device records fluid velocity relatively in relation to a set monitoring range of the flow (0 to 100 % as

display value). An absolute measurement of the fluid velocity or the mass flow is not possible. The sensitivity

of the calorimetric flow sensor changes with the fluid velocity. It increases with decreasing fluid velocity (for

example, with water, the greatest sensor sensitivity is recorded in the range from 0.03 to 0.5 m/s).

Item No. Output setting Order code (see Ordering information section)

B 1x PNP switch output DTT3x-A2A*******; DTT3x-A3A*******

DTT31, DTT35

Endress+Hauser 7

a0008181-en

Standard characteristic

A, B: Set monitoring ranges of the flow (example)

LOWF 0%: Setting for the minimum fluid velocity occurring in the monitoring range A or B (0% value)

HIF 100%: Setting for the maximum fluid velocity occurring in the monitoring range A or B (100% value)

Temperature

• Accuracy: 2 K (3.6 °F)

• Repeatability: 1 K (1.8 °F)

• Influence of medium temperature: 0.05 %/K of full scale value

Switch point non-repeatability

Temperature gradient In the event of a temperature change of ≥0.5 K/min in the medium, temporary display drifts are possible which

can exceed the specified non-reproducibility values of the switch point.

Sensor reaction time 6 to 12 s

Long-term drift 0.5% per year under reference operating conditions

Long-term reliability Mean time between failure (MTBF) > 100 years

(calculated according to "British Telecom Handbook of Reliability Data No. 5")

Switch output response time 100 ms

Analog output • Maximum measured error = switch point error and display error + 0.1%

• Rise time T90: ≤200 ms

• Settling time T99: ≤500 ms

Measuring range

(water as medium)

% of maximum value Influence of

medium temperature1)

1) The values indicated only apply to the device itself without taking the temperature-dependent change of the thermo-

physical properties of the medium into account. For this reason, we recommend you commission the device at the

process temperature and set the switch points (see 'Learn function' →ä12)

Influence of

ambient temperature

0.03 to 0.5 m/s

(0.1 to 1.6 ft/s)

≤2 % 0.05 %/K 0.04 %/K

0.03 to 1 m/s

(0.1 to 3.28 ft/s)

≤3 % 0.10 %/K 0.05 %/K

0.03 to 2 m/s

(0.1 to 6.56 ft/s)

≤5 % 0.15 %/K 0.10 %/K

0.03 to 3 m/s

(0.1 to 9.84 ft/s)

≤10 % 0.20 %/K 0.30 %/K

DTT31, DTT35

8Endress+Hauser

Operating conditions: Installation instructions

Installation instructions

• Electrical rotation of display by 180°

• Housing can be rotated up to 310 ° mechanically

Orientation

No restrictions, but self draining.

Inlet and outlet run

The sensor requires a fully developed flow profile for correct monitoring. For this reason, steadying sections

(5x DN) must be provided in the pipe after a pump, pipe bend, internal fittings and cross-sectional changes.

• The sensor tip should be completely surrounded by medium.

• Position the sensor tip in the area of maximum fluid velocity

(pipe center).

• Minimum sensor immersion length: Li≥10 mm (0.4 in)

A0007163

Installation conditions

Orientation

• For horizontal pipes: lateral installation.

!Note!

Installation from above only if the pipe is completely filled

with medium.

• For vertical pipes: installation in the ascending pipeline.

• DTT35: min. 3° inclination, because of self draining.

A0006977

Correct orientation

"Caution!

• Do not install in down pipes open towards the end.

• The sensor tip should never touch the pipe wall.

A0006978

Incorrect installation!

DTT31, DTT35

Endress+Hauser 9

Operating conditions: Environment

Ambient temperature range –40 up to +85 °C (-40 to +185 °F)

Storage temperature –40 up to +85 °C (-40 to +185 °F)

Climate class 4K4H as per DIN EN 60721-3-4

Degree of protection IP 65 (complete housing)

Shock resistance 50 g as per DIN IEC 68-2-27 (11 ms)

Vibration resistance • 20 g as per DIN IEC 68-2-6 (10-2000Hz)

• 4 g as per German Lloyd GL Guidelines

Electromagnetic compatibility • Interference emission as per IEC 61326 Series, class B electrical equipment

• Interference immunity as per IEC 61326 Series, appendix A (industrial use) and NAMUR Recommendation

NE 21

EMC influence: ≤0.5 %

Operating conditions: Process

Process temperature limits -20 to +85 °C (-4 to +185 °F)

!Note!

The sensor can be exposed up to 130 °C (266 °F) without damage; monitoring switches off automatically at

T ≥85 °C (185 °F) and starts again at T ≤ 85 °C (185 °F).

Process pressure limits Maximum permitted process pressure pmax ≤10 MPa = 100 bar (1450 psi)

"Caution!

The maximum process pressure for the conical metal-metal process connection (MB option) for the DTT35 is

1.6 MPa = 16 bar (232 psi)!

Process flow limit Liquids: 0 up to 3.0 m/s (0 up to 9.84 ft/s)

Operating range Liquids: 0.03 up to 3.0 m/s (0.1 up to 9.84 ft/s)

DTT31, DTT35

10 Endress+Hauser

Mechanical construction

Design, dimensions DTT31,

DTT35

Dimensions

a0005279

All dimensions in mm (in)

L = insertion length (see ordering information, Pos. 080)

Connector M12x1 as per IEC 60947-5-2 (see ordering information, Pos. 020)

Valve connector M16x1.5 or NPT ½" as per DIN 43650A/ISO 4400 (see ordering information, Pos. 020)

DTT31 design, dimensions for

process connections

a0007101

Process connections DTT31 (see ordering information DTT31, Pos. 080)

Item No. Version DTT31 Insertion length L Thread length L1Screw-in length L2

A Without process connection. For suitable welding bosses and compression

fittings see 'Accessories'.

30 and 100 mm

(1.18 and 3.94 in)

B Threaded process connection:

• ANSI NPT ¼" (m= AF14)

• ANSI NPT ½" (m= AF27)

• 14.3 mm (0.56 in)

• 19 mm (0.75 in)

• 5.8 mm (0.23 in)

• 8.1 mm (0.32 in)

C Cylindrical threaded process connection in inches as per ISO 228:

• G¼" (n= AF14)

• G½" (n= AF27)

• 12 mm (0.47 in)

• 14 mm (0.55 in)

Autres manuels pour Flowphant T DTT31

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Endress+Hauser Instrument de mesure

Endress+Hauser

Endress+Hauser Prosonic S FMU90 PROFIBUS DP Manuel utilisateur

Endress+Hauser

Endress+Hauser CA76NA Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltapilot S FMB70 Caractéristiques techniques

Endress+Hauser

Endress+Hauser Cerabar PMP21 Manuel utilisateur

Endress+Hauser

Endress+Hauser Cerabar M Manuel utilisateur

Endress+Hauser

Endress+Hauser Stamolys CA71CL Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar S FMD76 Manuel utilisateur

Endress+Hauser

Endress+Hauser Levelflex FMP50 Caractéristiques techniques

Endress+Hauser

Endress+Hauser Liquiline System CA80AL Caractéristiques techniques

Endress+Hauser

Endress+Hauser Levelflex FMP55 Caractéristiques techniques

Endress+Hauser

Endress+Hauser Omnigrad M TR44 Manuel

Endress+Hauser

Endress+Hauser Cubemass DCI Manuel utilisateur

Endress+Hauser

Endress+Hauser Teqwave F Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar PMD78B Manuel utilisateur

Endress+Hauser

Endress+Hauser CleanFit P CPA 472 Manuel utilisateur

Endress+Hauser

Endress+Hauser FieldEdge SGC200 Manuel utilisateur

Endress+Hauser

Endress+Hauser ISEmax CAS40D Manuel utilisateur

Endress+Hauser

Endress+Hauser RMM621 Manuel utilisateur

Endress+Hauser

Endress+Hauser Gammapilot FTG20 Instructions d'installation

Endress+Hauser

Endress+Hauser Proline Promass O 300 Manuel

Endress+Hauser

Endress+Hauser Prosonic M FMU42 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Prosonic Flow 91W Manuel

Endress+Hauser

Endress+Hauser Micropilot FMR67B Manuel

Endress+Hauser

Endress+Hauser Promag 300 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur

Acterna

Acterna MS1400 Manuel utilisateur

R&S

R&S ZPH Manuel utilisateur