Endress+Hauser Levelflex FMP51 Instructions d'installation

XA00644F-A/00/B2/02.12

71161825

Safety Instructions

Levelflex

FMP51/52/53/54/55/56/57

PROFIBUS PA

Zone 0/1 Ex ia IIC T6 Ga/Gb

Zone 20/21 Ex iaD 20/21 T*

en - Document: XA00644F-A

Safety instructions for electrical apparatus for explosion-hazardous areas

Èä3

zh - 文档：XA00644F-A

爆炸环境中电气仪表的安全指南

Èä11

Levelflex FMP51/52/53/54/55/56/57 XA00644F-A

2Endress+Hauser

XA00644F-A Levelflex FMP51/52/53/54/55/56/57

Endress+Hauser 3

Levelflex

FMP51/52/53/54/55/56/57

PROFIBUS PA

Table of Contents

Associated documentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Supplementary documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Manufacturer's certificates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Extended order code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Safety instructions: General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Safety instructions: Special conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Safety instructions: Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Safety instructions: Zone 0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Temperature tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Connection data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Levelflex FMP51/52/53/54/55/56/57 XA00644F-A

4Endress+Hauser

Associated documentation This document is an integral part of the following Operating Instructions:

BA01006F/00 (FMP51/52/54), BA01007F/00 (FMP53), BA01008F/00 (FMP55),

BA01009F/00 (FMP56/57)

The Operating Instructions pertaining to the device apply.

Supplementary

documentation

Explosion-protection brochure:

CP021Z/00

The Explosion-protection brochure is available:

• In the download area of the Endress+Hauser website: www.endress.com →Download →Advanced →

Documentation Code: CP021Z

• On the CD for devices with CD-based documentation

Manufacturer's certificates NEPSI Declaration of Conformity

Certificate number:

GYJ11.1553X

Affixing the certificate number certifies conformity with the standards:

• GB3836.1-2010

• GB3836.4-2010

• GB12476.1-2000

• GB12476.4-2010, with the following standard under www.IECEx.com:

- IEC61241-0:2004

Extended order code The extended order code is indicated on the nameplate, which is affixed to the device in such a way that it is

clearly visible. Additional information about the nameplate is provided in the associated Operating Instructions.

Structure of the extended order code

• Basic specifications

The features that are absolutely essential for the device (mandatory features) are specified in the basic

specifications. The number of positions depends on the number of features available.

The selected option of a feature can consist of several positions.

• Optional specifications

The optional specifications describe additional features for the device (optional features). The number of

positions depends on the number of features available.

The features have a 2-digit structure to aid identification (e.g. JA). The first digit (ID) stands for the feature

group and consists of a number or a letter (e.g. J = test, certificate).

The second digit constitutes the value that stands for the feature within the group (e.g. A = 3.1 material

(wetted parts), inspection certificate).

More detailed information about the device is provided in the following tables. These tables describe the

individual positions and IDs in the extended order code which are relevant to hazardous locations.

FMP5x - ************* + A*B*C*D*E*F*G*..

------------------ ------------------------ ------------------------------

Device type Basic specifications Optional specifications

* = Placeholder

At this position, an option (number or letter) selected from the specification is displayed instead of the

placeholders.

XA00644F-A Levelflex FMP51/52/53/54/55/56/57

Endress+Hauser 5

Device type: FMP51, FMP52, FMP53, FMP54, FMP55, FMP56, FMP57

Basic specifications

Optional specifications

Position Selected option Description

1, 2 Approval N2 Zone 0/1 Ex ia IIC T6 Ga/Gb,

Zone 20/21 Ex iaD 20/21 T*

3 Power Supply; Output G 2-wire, PROFIBUS PA

4 Display; Operation A

Without LCD, via communication

LCD SD02, push button + data backup function

5Housing B

Dual compartment, 316L (GT18)

Dual compartment, Alu coated (GT20)

9, 10 Seal AB (only FMP56)

A4 (only FMP51/57)

B3 (only FMP51/56/57)

B5 (only FMP53)

C3 (only FMP51)

C4 (only FMP53)

D1 (only FMP54)

D2 (only FMP54)

Viton, –30...120 °C

Viton, –30...150 °C

EPDM, –40...120 °C

EPDM, FDA, USP Cl. VI, –20..130 °C

Kalrez, –20...200 °C

Kalrez, FDA, USP Cl. VI, –20...150 °C

Graphite, –196...280 °C (XT)

Graphite, –196...450 °C (HT)

ID Selected option Description

Mx Probe Design MA (only FMP53)

MC (only FMP53)

ME (only FMP51/54)

Sensor compact, detachable

Sensor remote, 3 m/9 ft cable, detachable +

mounting bracket

Sensor remote, 6 m/18 ft cable, detachable +

mounting bracket

Coax ground tube multiple punched

Nx Accessory Mounted NC (only FMP51/52/55) Gas-tight feed through

Levelflex FMP51/52/53/54/55/56/57 XA00644F-A

6Endress+Hauser

Safety instructions:

General

• Staff must meet the following conditions for mounting, electrical installation, commissioning and

maintenance of the device:

- Be suitably qualified for their role and the tasks they perform

- Be trained in explosion protection

- Be familiar with national regulations

• For installation, use and maintenance of the device, users must also observe the requirements stated in the

Operating Instructions and the standards:

- GB50257-1996: "Code for construction and acceptance of electric device for explosion atmospheres and

fire hazard electrical equipment installation engineering".

- GB3836.13-1997: "Electrical apparatus for explosive gas atmospheres, Part 13: Repair and overhaul for

apparatus used in explosive gas atmospheres".

- GB3836.15-2000: "Electrical apparatus for explosive gas atmospheres, Part 15: Electrical installations in

hazardous area (other than mines)".

- GB3836.16-2006: "Electrical apparatus for explosive gas atmospheres, Part 16: Inspection and

maintenance of electrical installation (other than mines)".

- GB15577-2007: "Safety regulations for dust explosive prevention and protection".

- GB12476.2-2006: "Electrical apparatus for use in the presence of combustible dust,

Part 1-2: Electrical apparatus protected by enclosures and surface temperature limitation -

Selection, installation and maintenance".

• Install the device according to the manufacturer's instructions and national regulations.

• Do not operate the device outside the specified electrical, thermal and mechanical parameters.

• Only use the device in media to which the wetted materials have sufficient durability.

• Refer to the temperature tables for the relationship between the permitted ambient temperature for the

sensor and/or transmitter, depending on the range of application, and the temperature class.

• Modifications to the device can affect the explosion protection and must be carried out by staff authorized

to perform such work by Endress+Hauser.

• When replacing the probe electronics or opening the connection between the remote cable and the probe,

a jumper plug must be used or a short-circuit must be established between the probe contact and the

potential equalization conductor to avoid electrostatically charging the probe.

• After mounting and connecting the probe, ingress protection of the housing must be at least IP66.

Perform the following to achieve the degree of protection:

- Screw the cover tight.

- Mount the cable entry correctly.

• When using in hybrid mixtures (gas and dust occurring simultaneously), observe additional measures for

explosion protection.

Safety instructions:

Special conditions

Permitted ambient temperature range at the electronics housing: –40 °C ≤Ta≤+80 °C.

Observe the information in the temperature tables.

Device type FMP52, FMP55

• A probe coated with non-conductive material can be used if avoiding electrostatic charging of the probe

(e.g. through friction, cleaning, maintenance, strong medium flow).

XA00644F-A Levelflex FMP51/52/53/54/55/56/57

Endress+Hauser 7

Safety instructions:

Installation

XA00634Fxx01

å1

Zone 1, Zone 21

1 Tank; Zone 0/1 or Zone 20/21

2 Electronic insert

3 Certified associated apparatus

4 Potential equalization line

5 Potential equalization

• In the case of process connections made of polymeric material or with polymeric coatings, avoid electrostatic

charging of the plastic surfaces.

• After aligning (rotating) the housing, retighten the fixing screw (see Operating Instructions).

• When mounting the device:

- Exclude any mechanical damage or friction during the application.

- Pay particular attention to flow conditions and tank fittings.

• Continuous service temperature of the connecting cable: –40 to ≥+85 °C; in accordance with the range of

service temperature taking into account additional influences of the process conditions

(Ta,min and Ta,max +20 K).

• In the event of additional or alternative special varnishing on the housing or other metal parts:

- Observe the danger of electrostatic charging and discharge.

- Do not rub surfaces with a dry cloth.

• Only use certified cable entries or sealing plugs.

The metal sealing plugs supplied meet this requirement.

• Before operation:

- Screw in the cover all the way.

- Tighten the securing clamp on the cover.

Intrinsic safety

• The device is only suitable for connection to certified, intrinsically safe equipment with explosion protection

Ex ia / Ex ib.

• The intrinsically safe input power circuit of the device is isolated from ground. If the device is only equipped

with one input, the dielectric strength of the input is at least 500 Vrms. If the device is equipped with more

than one input, the dielectric strength of each individual input to ground is at least 500 Vrms, and the

dielectric strength of the inputs vis-à-vis one another is also at least 500 Vrms.

• Observe the pertinent guidelines when interconnecting intrinsically safe circuits (GB3836.13, GB3836.15,

GB3836.16).

• The device can be connected to the Endress+Hauser FXA291 service tool: refer to the Operating

Instructions.

• When the intrinsically safe Ex ia circuits of the device are connected to certified intrinsically safe circuits of

Category Ex ib for Equipment Groups IIC or IIB, the type of protection changes to Ex ib[ia] IIC or Ex ib[ia] IIB.

Regardless of the power supply, all the internal circuits correspond to Ex ia IIC type of protection (e.g. service

interface, external display, sensor).

–

Levelflex FMP51/52/53/54/55/56/57 XA00644F-A

8Endress+Hauser

Potential equalization

• Integrate the device into the local potential equalization.

• For grounding the screen → å2.

XA00640Fxx02

å2

Version 1

Use small capacitors (e.g. 1 nF, 1500 V, dielectric strength, ceramic).

Total capacitance connected to the screen may not exceed 10 nF.

Version 2

1 Terminating resistor

2 Distributor/T box

3 Screen insulated

4 Supply unit/Segment coupler

5 Potential equalization (secured in high degree)

6 Field device

Overvoltage protection

• For installations which require overvoltage protection to comply with national regulations or standards

(GB3836.13, GB3836.15, GB3836.16), install the device using overvoltage protection (e.g. HAW56x from

Endress+Hauser).

• Observe the safety instructions of the overvoltage protection.

221

6 6

XA00644F-A Levelflex FMP51/52/53/54/55/56/57

Endress+Hauser 9

Safety instructions:

Zone 0

• In the event of potentially explosive vapor/air mixtures, only operate the device under atmospheric

conditions.

- Temperature: –20 to +60 °C

- Pressure: 80 to 110 kPA (0.8 to 1.1 bar)

- Air with normal oxygen content, usually 21 % (V/V)

• Associated devices with galvanic isolation between the intrinsically safe and non-intrinsically safe circuits are

preferred.

• If there is a risk of dangerous potential differences within Zone 0 (e.g. through the occurrence of atmospheric

electricity), implement suitable measures for intrinsically safe circuits in Zone 0 (e.g. in accordance with the

requirements of GB3836.13, GB3836.15, GB3836.16).

Temperature tables Èä19

Connection data Basic specification, Position 1, 2 (Approval) = N2

Ex ia

• Power supply and signal circuit with protection type: intrinsic safety Ex ia IIC or IIB

Service interface (CDI)

Taking the following values into consideration, the device can be connected to the Endress+Hauser FXA291

service tool or a similar interface:

Basic specification, Position 3 (Power Supply; Output) = G TRC [06]

Terminal 1 (+), 2 (–) Terminal 3 (+), 4 (–)

FISCO: Entity: Ausgang PFS:

Ui= 17.5 V

Ii= 550 mA

Pi= 5.5 W

Ui= 30 V

Ii≤ 300 mA

Pi= 1.2 W

Ui= 30 V

Ii= 300 mA

Pi= 1 W

Uo= 0 V

effective inner inductance Li= 10 μH

effective inner capacitance Ci= 5 nF

leak current ≤ 50 μA

effective inner inductance Li= 0 mH

effective inner capacitance Ci= 24 nF

Service interface

Ui= 7.3 V

effective inner inductance Li= negligible

effective inner capacitance Ci= negligible

Uo= 7.3 V

Io= 100 mA

Po= 160 mW

permitted outer inductance Lo= negligible

permitted outer capacitance Co= negligible

Levelflex FMP51/52/53/54/55/56/57 XA00644F-A

10 Endress+Hauser

Autres manuels pour Levelflex FMP51

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Endress+Hauser Équipement de laboratoire

Endress+Hauser

Endress+Hauser Liquistation CSF34 Manuel utilisateur

Endress+Hauser

Endress+Hauser Liquiline Mobile CML18 Manuel utilisateur

Endress+Hauser

Endress+Hauser analytikjena qTOWER3 84 auto Manuel utilisateur

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TAdvanced 96 Manuel utilisateur

Endress+Hauser

Endress+Hauser OXY5500 QF Mise à jour du firmware

Endress+Hauser

Endress+Hauser Chemoclean CYR10B Manuel utilisateur

Endress+Hauser

Endress+Hauser analytikjena Biometra TRobot II Manuel

Endress+Hauser

Endress+Hauser analytikjena Biometra ThermoShaker TSC Comment utiliser

Endress+Hauser

Endress+Hauser CPY7B Manuel utilisateur

Endress+Hauser

Endress+Hauser Analytik Jena CyBio FeliX Manuel utilisateur

Endress+Hauser

Endress+Hauser Analytik Jena InnuPure C16 touch Manuel utilisateur

Endress+Hauser

Endress+Hauser analytikjena CyBio SELMA Series Manuel utilisateur

Endress+Hauser

Endress+Hauser analytikjena PlasmaQuant 9100 Manuel utilisateur

Endress+Hauser

Endress+Hauser Analytik Jena APUsim Manuel utilisateur

Endress+Hauser

Endress+Hauser analytikjena CyBio QuadPrint HQ Manuel utilisateur

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TSC ThermoShaker Manuel utilisateur

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TAdvanced Manuel utilisateur

Endress+Hauser

Endress+Hauser Analytik Jena PlasmaQuant PQ 9000 Manuel utilisateur

Endress+Hauser

Endress+Hauser Analytik Jena PlasmaQuant MS Manuel utilisateur

Endress+Hauser

Endress+Hauser KIO1 Caractéristiques techniques

Endress+Hauser

Endress+Hauser Liquistation CSF48 Manuel utilisateur

Endress+Hauser

Endress+Hauser Liquistation CSF48 Manuel utilisateur

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TRIO Manuel utilisateur

Endress+Hauser

Endress+Hauser Liquiport 2010 CSP44 Manuel utilisateur

Manuels Équipement de laboratoire populaires d'autres marques

Qiagen

Qiagen DML 3000 Manuel utilisateur

Queensgate

Queensgate NANOSCAN OP400 Manuel de programmation

Conviron

Conviron GEN1000-GE Manuel utilisateur

Parr Instrument

Parr Instrument 4560 Mode d’emploi

IKA

IKA IC control Manuel utilisateur

Integra

Integra DOSE IT Manuel utilisateur

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manuel utilisateur

NI PXI-5422 Manuel

Collomix

Collomix Aqix Manuel utilisateur

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuel utilisateur

Ocean Insight

Ocean Insight FLAME-NIR+ Manuel utilisateur

Parker

Parker ALIGN-MG-NA Manuel utilisateur

BD 644787 Manuel utilisateur

DENTAURUM

DENTAURUM Compact Megaplus Manuel utilisateur

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuel utilisateur

VWR

VWR SAS Super IAQ Manuel utilisateur

illumina

illumina MiSeqDx Manuel utilisateur

Yamato

Yamato BM510 Manuel utilisateur