ENDEAVOUR ETPRO-50W Manuel utilisateur
ETPRO-50W
50W Soldering lron Kit
Cap
Chisel Soldering Tip
Knurled Nut
Locking Nut
LED Light
Power Button
ON/OFF Switch
Notch
Micro-USB Port
15 gram Solder
(Tin:60%/Lead:40%)
Cone Soldering Tip
Cleaning Sponge
Heat Shrink
Safety Stand
USB Connector
Micro USB Connector
The ETPRO-50W represents the latest in soldering iron technology. Using
a rechargeable lithium battery, this unit delivers a 50W output suitable for
automotive / industrial applications.
New rapid heat technology generates a 420 degree temperature within 35
seconds. The unit has a 45 minutes continuous runtime. Rechargeable
via mini USB.
Heat Shrink Instructions
1. Slide soldering iron switch to the ON position and press and hold the power button.
The LED light will illuminate indicating the iron is on.
2. Keep the shrink tip moving back and forth along the length of tube as staying in one place can damage the tube or wire.
3. Continue heating the tube until it is tightly secured to the wire.
Using the supplied cable, insert the Micro USB connector into the end of the
soldering iron, and the USB connector to a wall charger / computer port.
When used for soldering and similar applications, this product contains or produces chemicals known to the State of California to
cause cancer and birth defects or other reproductive harm.
ŖWork only in a dry area.
ŖWork only in areas free from flammable materials.
ŖAlways store the soldering iron in a dry place out of reach of children or anyone who has not read these instructions.
ŖAlways wear eye protection and gloves when operating the soldering iron.
ŖNever touch the tip of a hot soldering iron or attempt to remove solder from the tip with your hands.
ŖDo not use in the fabrication or repair of potable water service systems.
ŖAlways rest the soldering iron where heat from soldering iron cannot damage nearby items.
ŖEnsure that switch is in the OFF position when the iron is not in use.
ŖTip remains hot after use for several minutes. Ensure tip is cool before storing the soldering iron. Never leave soldering iron
unattended.
ŖDo not disassemble or modify the battery. The battery contains safety and protection devices which if damaged, may cause the
battery to generate heat, rupture or ignite.
Soldering Iron: 35 minutes
Heat Shrink: 45 minutes
ETPRO-50W
50W Soldering lron Kit
Autres manuels ENDEAVOUR Outils électriques
