Emtron CAN Manuel utilisateur

USER

MANUAL

Rev 1.0

Emtron CAN Gauge

EMTRON ED5 USER MANUAL

WWW.EMTRON.WORLD

Kit Contents

When purchasing the Emtron CAN Gauge the following items are included:

•1x Emtron CAN Gauge

•1 x Mounting Bracket

•2 x Mounting Bracket thumbscrews

•1 x Unterminated standard flying loom

EMTRON ED5 USER MANUAL

WWW.EMTRON.WORLD

Contents

1.0 Description...........................................................................................................................3

2.0 Specification.........................................................................................................................4

3.0 Requirements..................................................................................................................5

3,1 Compatible ECU: ..............................................................................................................5

3.2 Smartphone or Tablet:.....................................................................................................5

3.3 ECU Terminals, Connector, & Installation tools: .............................................................5

4.0 Wiring...................................................................................................................................6

4.1 CAN Guage Wiring............................................................................................................6

4.2 CAN Bus Wiring................................................................................................................7

4.3 Illumination Signal Wiring................................................................................................9

5.0 Gauge ART Application......................................................................................................10

5.1 Create Configuration......................................................................................................10

5.2 Save & Send Configuration ............................................................................................11

5.3 Load Configuration.........................................................................................................11

6.0 Emtune Settings.................................................................................................................12

7.0 Ordering Information.........................................................................................................13

EMTRON ED5 USER MANUAL

WWW.EMTRON.WORLD

1.0 Description

The Emtron CAN Gauge by Gauge ART is a compact 52mm OLED gauge that connects to all

Emtron ECU’s to display real-time data from CAN broadcasts. It is also compatible with

aftermarket and factory ECU’s.

The gauge is wirelessly configurable using an Android or Apple iOS mobile device through

wifi. Gauge channels, bar graphs, warning points, and custom gauge labels can be

configured using the “Gauge ART CAN Gauge App”.

EMTRON ED5 USER MANUAL

WWW.EMTRON.WORLD

2.0 Specification

Emtron CAN Gauge main features summarised:

•52mm display

•Configurable low and high warnings

•Day / Night dimming

•Wireless wifi configuration

•Connect more than one unit

•Runtime channel names user definable

•User defined channels can be displayed

•OLED Display

•1,2 or 4 channel gauge layouts available

•Up to 10 different pages available

Inputs

•1x CAN bus

Operating Temperature

▪Operating Temperature Range: -30 to 85°C (-22 to 185°F)

EMTRON ED5 USER MANUAL

WWW.EMTRON.WORLD

3.0 Requirements

3,1 Compatible ECU:

All Emtron ECU’s are compatible

Most common ECU’s are compatible including:

Adaptronic

AEM EMS 4

AEM EMS Series 2

AEM Infinity

Factory CAN OEM (Requires OBD Link)

Hondata KPro4 / S300

Link G4+

MaxxECU

Megasquirt MS3

Motec M1 Series

ProEFI

Syvecs S6, S6+, S8

Vipec

Wolf EMS

3.2 Smartphone or Tablet:

Smartphone or tablet with Apple iOS or Android v4.4 or later.

3.3 ECU Terminals, Connector, & Installation tools:

The Emtron CAN Gauge includes an unterminated flying loom that will require connection to

a power source and the ECU CAN bus.

EMTRON ED5 USER MANUAL

WWW.EMTRON.WORLD

4.0 Wiring

4.1 CAN Guage Wiring

Wire

Function

Red

14 V Supply

Black

Ground

Orange

14 V Illumination

White

CAN Hi

Green

CAN Lo

Table 4.1. CAN Gauge Wiring

EMTRON ED5 USER MANUAL

WWW.EMTRON.WORLD

4.2 CAN Bus Wiring

The CAN Gauge includes a user-configurable 120 ohm terminating resistor jumper. The

resistor is enabled when the jumper is in place.

EMTRON ED5 USER MANUAL

WWW.EMTRON.WORLD

CAN bus wiring precautions

▪CAN Bus High and Low are differential signals, so twisted pair MUST be used. Failing to

do so will compromise the entire CAN Bus System.

▪In some extreme environments, shielded twisted pair may be required to help with

reliability and data integrity.

▪The less connectors in any transmission system the better. Unnecessary connectors are

almost guaranteed to present an impedance discontinuity and hence may cause

reflections and data loss.

▪CAN Bus termination must be done correctly by using a 120 ohm 0.25W resistor at each

END of the bus system.

▪Maximum Stub length to a device from the main Bus is recommended at 0.3m, in

accordance with High-Speed ISO 11898 Standard specification. See Figure 3.3.

Figure 4.1. CAN Bus Wiring Example. ECU and Dash at each end with 120 Ohm Termination

Figure 4.2. CAN Bus Wiring Example. ECU and ELC2 at each end with 120 Ohm Termination

EMTRON ED5 USER MANUAL

WWW.EMTRON.WORLD

Figure 4.3. CAN Bus Wiring Example. Stub Length less than 0.3m

4.3 Illumination Signal Wiring

The CAN Gauge can dim illumination during night when the parking lights are on. Using the

factory service manual, find a wire in the interior that switches to +12V power when the

parking lights are on. Verify with a voltmeter or test light that the wire receives +12V when

the parking lights are turned on.

Note that many vehicles have an illumination switched connector in the interior fuse box.

Table des matières

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur