Emerson CSI 2140 Manuel utilisateur
Quick Start Guide
MHM-97430, Rev 4
March 2016
CSI 2140 Machinery Health™ Analyzer
Quick Start Guide
Copyright
© 2016 by Emerson Process Management. All rights reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language in any form by any means without the written permission
of Emerson.
Disclaimer
This manual is provided for informational purposes. EMERSON PROCESS MANAGEMENT MAKES
NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. Emerson Process Management shall not be liable for errors, omissions, or
inconsistencies that may be contained herein or for incidental or consequential damages in
connection with the furnishing, performance, or use of this material. Information in this
document is subject to change without notice and does not represent a commitment on the part
of Emerson Process Management. The information in this manual is not all-inclusive and cannot
cover all unique situations.
Trademarks and Servicemarks
See http://www2.emersonprocess.com/siteadmincenter/PM Central Web Documents/marks.pdf
All other marks are property of their respective owners.
Patents
The product(s) described in this manual are covered under existing and pending patents.
March 2016 Quick Start Guide
MHM-97430 Rev 4 3
Quick Start Guide March 2016
4MHM-97430 Rev 4
Introduction to the analyzer
Front view
CSI 2140 front panelFigure 1:
A. Home key - Return to the Home screen from any program.
B. Reset key - Return to the main menu in a program.
C. Function keys - Display menu options.
D. Enter key - Select a menu or option.
E. Keypad backlight key - Turn on the backlight under the keys. (1)
F. LCD backlight key - Set the backlight for the LCD touchscreen.
G. Help key - Display Help text for a key.
H. Power key -Turn the analyzer on or off, or put the analyzer in standby.
I. Battery LED - Green light if the battery pack is charged; amber when charging.
J. Status LED - Blue light flashes each time you press a key or option, blinks in
power save mode, and remains solid in standby mode.
(1) To comply with relevant safety certifications, the CSI 2140 labeled "ATEX/IECEx Zone 2" does not
have a keypad backlight.
March 2016 Quick Start Guide
MHM-97430 Rev 4 5
K. Arrow keys - Move through menus.
L. ALT key - Display an alternate screen, if available.
M. Back key - Back up to the main menu in a program.
Top view
ConnectorsFigure 2:
A. Power supply connector.
B. Ethernet port.
C. Micro USB port.
D. Wireless LED.
E. Bluetooth® LED.
CAUTION!
To prevent damage to the analyzer:
•Do not connect a signal outside the range of 0 to 24 volts into the Accel
input of the CSI 2140.
•Do not connect a signal outside the range of +/- 24 volts into the Volts /
Tach input of the CSI 2140.
Turn on the analyzer for the first time
You need to activate the battery pack before you can turn on the analyzer for
the first time. The battery pack is shipped in storage mode to protect the
battery charge. Connect the provided power supply cord into an outlet and
to the analyzer to activate the battery pack.
Quick Start Guide March 2016
6MHM-97430 Rev 4
Procedure
1. Connect the provided power supply cord into an outlet and to the
analyzer.
Note
Refer to precautions for the battery pack and power adapter.
The Battery LED is amber to indicate the battery pack is charging. The
analyzer is activated.
2.
Press and hold the power key to turn the analyzer on.
The Home screen appears when you turn on the analyzer. The time and
date are set to a default value.
3. To set the time and date, press Home > ALT > F3 Set Time.
Battery pack
A rechargeable Lithium-Ion battery pack powers the analyzer. A typical
charge should last for more than 8 hours of continuous use. The analyzer
displays a low-battery warning when the remaining charge reaches a set
level; the default is 15 percent. If the battery pack fully discharges, you do not
lose any data or settings.
The battery pack is shipped in storage mode to protect the battery charge.
Refer to Turn on the analyzer for the first time to activate the battery pack.
You do not need to discharge or calibrate the battery pack. The hardware
optimizes battery pack performance. Contact technical support if you
experience any problems or for instructions on how to store or replace the
battery pack.
WARNING!
Use only Emerson battery packs with the CSI 2140. The analyzer will not
function if a non-Emerson battery pack is used. Lithium-Ion batteries have
very specific charging requirements. Emerson power supplies and chargers
are designed to work with the Emerson Lithium-Ion battery pack. Using
battery packs other than approved Emerson battery packs could not only
void the warranty, but could also be hazardous.
March 2016 Quick Start Guide
MHM-97430 Rev 4 7
Charge the battery pack
The analyzer is fully operational during charging. As a best practice, charge
the battery pack frequently. Emerson recommends you charge the battery
pack the night before you intend to use it.
WARNING!
•Use only Emerson-supplied power supplies and chargers approved for use
with the CSI 2140 and Emerson battery packs. Using any power supplies
and chargers other than approved Emerson power supplies and battery
packs could not only void the warranty, but will also most likely damage
the analyzer or the battery pack.
•When charging the CSI 2140 with the battery pack or the battery pack by
itself, ensure the ambient temperature where charging is occurring is 50°
F to 95° F (10° C to 35° C).
•Charge the battery pack only in a non-hazardous area.
Procedure
1. Remove the rubber plug on the top of the analyzer.
2. Insert the power supply connector into the analyzer. The analyzer can be
powered on or off.
3. Plug the AC connector on the power supply into a standard AC outlet,
ranging from 100 VAC to 250 VAC, 50-60 Hz. A full recharge may take
four hours.
The back of the analyzer may feel warm during charging. The power
supply can remain connected to the analyzer after charging completes.
You cannot overcharge the battery pack.
Attach the shoulder strap
1. Press and hold the button on the strap connector, and insert it into the
connectors on the sides of the analyzer or the CSI 2140 Four-Channel
Input Adapter, if attached.
2. To release the strap, press and hold the button on the connector and
then pull.
Use the stand
1. To put the stand in the upright position, grab the stand and pull up until
the stand locks.
2. To release the stand, place the analyzer face down, grab the base of the
stand, and gently pull.
Quick Start Guide March 2016
8MHM-97430 Rev 4
The lock releases, and you can push the stand toward the analyzer.
Release the standFigure 3:
Home screen
The Home screen appears when you turn on the analyzer by pressing the
power key.
March 2016 Quick Start Guide
MHM-97430 Rev 4 9
Home screenFigure 4:
A. An alternate screen (ALT) includes additional options.
B. Current time and date.
C. Default splash screen.
D. Remaining battery pack charge.
E. Number of supported channels for the analyzer.
F. Serial number.
G. Group number for updating multiple analyzers at one site.
H. Available internal memory.
Home screen programs and settings
The Home screen has two alternate screens that display programs and
settings. ALT1 or ALT2 appears at the top of the screen and the function keys
are outlined in yellow. To switch ALT screens, press the ALT key or the ALT text
on the touchscreen.
ALT1 keys
Option Description
F1 Intentionally blank.
F2 File Utility Copy, delete, or move routes or jobs saved in the analyzer internal
memory or a memory card.
Quick Start Guide March 2016
10 MHM-97430 Rev 4
Autres manuels pour CSI 2140
2
Table des matières
Autres manuels Emerson Instrument de mesure
Emerson
Emerson Rosemount 9195 Manuel utilisateur
Emerson
Emerson FB3000 Manuel utilisateur
Emerson
Emerson Rosemount 6888Xi Manuel utilisateur
Emerson
Emerson Rosemount 485 Annubar Manuel utilisateur
Emerson
Emerson Rosemount 3814 Manuel de programmation
Emerson
Emerson Rosemount 3051S Series Manuel utilisateur
Emerson
Emerson Rosemount 8600 Series Manuel utilisateur
Emerson
Emerson OPM 3000 Manuel utilisateur
Emerson
Emerson Rosemount 1056 Manuel utilisateur
Emerson
Emerson Rosemount WPG Manuel utilisateur
Emerson
Emerson Rosemount 3051 CF Series Manuel utilisateur
Emerson
Emerson Daniel 3410 Series Manuel utilisateur
Emerson
Emerson Nelson CM-1 Manuel utilisateur
Emerson
Emerson AL200 Manuel utilisateur
Emerson
Emerson Mobrey Hydratect 2462 Manuel utilisateur
Emerson
Emerson Rosemount 753R Manuel utilisateur
Emerson
Emerson Rosemount CT5100 Ex Manuel utilisateur
Emerson
Emerson Daniel PT Series Manuel utilisateur
Emerson
Emerson FloBoss S600+ Manuel d'installation et d'exploitation
Emerson
Emerson Rosemount 3051SF Series Manuel utilisateur
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur