Emerson COPELAND XC PRO Manuel du propriétaire

TI_Unit_OMTE_CO2_Scroll_01_EN_Rev00 1/6

Date of last update: Feb-23

Ref: TI_Unit_OMTE_CO2_Scroll_01_EN_Rev00

Application Engineering Europe

XC PRO CONTROLLER – BIOS UPDATE

QUICK USER’S MANUAL

1. Connect laptop to controller:

a. Identify the IP address of the controller.

i. Go to the "Service" menu on the Visotouch display connected to the controller (yellow

wrench icon) →Scroll down to "Conf IP & MDB Management" →The IP address is shown

in this menu.

ii. The default IP address of the controller is 192.168.0.250.

TI_Unit_OMTE_CO2_Scroll_01_EN_Rev00 2/6

b. Connect the laptop to the controller with a crossover cable.

c. The laptop can only communicate with the controller if they are in the same network.

i. Disconnect the laptop from your company data network.

ii. In the Windows environment go to "Network & Internet Settings", then "Change adapter

options".

iii. Select "Ethernet" and "Properties".

TI_Unit_OMTE_CO2_Scroll_01_EN_Rev00 3/6

iv. Click on "Internet Protocol Version 4 (TCP/IPv4)" and "Properties".

v. In "Properties" set the IP parameters according to the IP address of the controller.

vi. Click on "OK" to confirm.

TI_Unit_OMTE_CO2_Scroll_01_EN_Rev00 4/6

d. Open the webpage of the controller.

i. Go to the browser.

ii. Enter the IP address of the controller.

iii. Enter username "admin" and password "Dixell" to login.

e. Open "Info" page on the left.

TI_Unit_OMTE_CO2_Scroll_01_EN_Rev00 5/6

2. Load empty application:

a. Prepare USB stick with following folders and correct isadix file in folder "app". Contact the Emerson

Application Engineering department for the correct isadix file.

b. Connect USB stick to the controller.

c. Session will become invalid (after a few minutes).

d. Reload the page.

e. Application release shows "Restore isadix (Validating)".

f. When the message “(Validating)” disappears (reloading of the page might be necessary), remove

the USB stick.

TI_Unit_OMTE_CO2_Scroll_01_EN_Rev00 6/6

3. Load new BIOS:

a. Prepare USB stick with following folders and correct zupdater file in folder "bios" and correct isadix

file in folder "app". Contact the Emerson Application Engineering department for the correct zupdater

and isadix files.

b. Connect USB stick to the controller.

c. Session will become invalid (after a few minutes).

d. Reload the page.

e. BIOS and application release show "(Validating)".

f. When the message "(Validating)" disappears (reloading of the page might be necessary), remove

the USB stick.

g. Update is successful if the correct number is shown in row "BIOS Release" without "(Validating)".

DISCLAIMER

1. The contents of this publication are presented for informational purposes only and are not to be construed as warranties or

guarantees, express or implied, regarding the products or services described herein or their use or applicability.

2. Emerson Climate Technologies GmbH and/or its affiliates (collectively "Emerson"), as applicable, reserve the right to modify

the design or specifications of such products at any time without notice.

3. Emerson does not assume responsibility for the selection, use or maintenance of any product.Responsibility for proper

selection, use and maintenance of any Emerson product remains solely with the purchaser or end user.

4. Emerson does not assume responsibility for possible typographic errors contained in this publication.

Table des matières

Autres manuels Emerson Contrôleurs

Emerson

Emerson EC3-XEV02D Manuel utilisateur

Emerson

Emerson iPro Series Schéma de câblage

Emerson

Emerson Dixell XR03CH Schéma de câblage

Emerson

Emerson DanLoad 6000 Guide rapide

Emerson

Emerson FloBoss 104 Guide rapide

Emerson

Emerson EXD-SH1 Manuel utilisateur

Emerson

Emerson FloBoss 107 Manuel utilisateur

Emerson

Emerson EC2-742 Manuel utilisateur

Emerson

Emerson Tartarini B/240-FS Series Manuel utilisateur

Emerson

Emerson VSX4 Series Manuel utilisateur

Emerson

Emerson E2 Enhanced RX Manuel de service

Emerson

Emerson 2202 Instructions de montage

Emerson

Emerson Fisher FIELDVUE L2t Manuel utilisateur

Emerson

Emerson E2 Manuel utilisateur

Emerson

Emerson EC2-311 Manuel utilisateur

Emerson

Emerson TESCOM 44-6800 E Series Manuel utilisateur

Emerson

Emerson Bettis RP3E Manuel utilisateur

Emerson

Emerson Bettis BHH Series Manuel utilisateur

Emerson

Emerson SW81 Manuel utilisateur

Emerson

Emerson TARTARINI FL Series Manuel utilisateur

Emerson

Emerson dixell WING XW260K Schéma de câblage

Emerson

Emerson Fisher 67D Series Manuel utilisateur

Emerson

Emerson CASH VALVE A-32 Manuel utilisateur

Emerson

Emerson Bettis G2XXX M11 series Mode d'emploi

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur

3M MicroTouch EX113 Manuel utilisateur