Emerson Rosemount 222 Manuel utilisateur
Reference Manual
00809-0100-3222, Rev AA
September 2018
Rosemount™ 222
Toroidal Flow Through Conductivity Sensors
2
Safety Information
WARNING
HIGH PRESSURE AND TEMPERATURE HAZARD
Before removing the senosr, reduce the process pressure to 0 psig and cool down the process temperature.
Failure to reduce the pressure and temperature may cause serious injury to personnel.
CAUTION
EQUIPMENT DAMAGE
The wetted sensor materials may not be compatible with process composition and operating conditions. Application
compatibility is entirely your responsibility.
3
4
Contents
Chapter 1 Description and specifications ...................................................................................... 7
1.1 Description ..................................................................................................................................... 7
1.2 Unpacking and inspection ............................................................................................................... 7
1.3 Sensor specifications ....................................................................................................................... 7
1.4 Ordering information ...................................................................................................................... 8
Chapter 2 Install ......................................................................................................................... 11
2.1 Installing the sensor ...................................................................................................................... 11
Chapter 3 Wiring ........................................................................................................................ 15
3.1 Wiring the sensor .......................................................................................................................... 15
Chapter 4 Calibration .................................................................................................................. 19
4.1 Sensor calibration ......................................................................................................................... 19
Chapter 5 Troubleshooting ......................................................................................................... 21
5.1 Troubleshooting ........................................................................................................................... 21
Chapter 6 Accessories ................................................................................................................. 23
Chapter 7 Return of Materials ..................................................................................................... 25
Reference Manual Contents
00809-0100-3222 September 2018
Rosemount 222 Sensors 5
Contents Reference Manual
September 2018 00809-0100-3222
6 Reference Manual
1 Description and specifications
1.1 Description
The Rosemount 222 toroidal flow through conductivity sensor measures conductivity in
highly conductive liquids up to 2 S/cm (2,000,000 μS/cm). A noninvasive flow through
design allows for in-line installations without any obstruction to sample and makes these
sensors ideal for use with viscous or fibrous liquids.
1.2 Unpacking and inspection
Complete the following steps when you unpack your instrument.
Procedure
1. Inspect the shipping container. If there is damage, contact the shipper immediately
for instructions.
2. Save the box.
3. If there is no apparent damage, unpack the container. If there is no apparent
damage, unpack the container and remove the sensor.
4. Ensure that all items shown on the packing list are present. If items are missing, If
items are missing, contact your local Customer Care representative
5. Save the shipping container and packaging.
1.3 Sensor specifications
Table 1-1: Sensor Specifications
Sensor specification Description
Wetted materials Teflon-lined carbon steel pipe, with carbon steel after
flanges; 316 stainless steel outer flange (option -21)
Process connection 1 in. 150 lb or 300 lb raised face threaded ANSI B16.5
flange
2 in. 150 lb or 300 lb raised face threaded ANSI B16.5
flange
Cable length 20 ft. (6.1 m)
Maximum cable length 100 ft. (30 m)
Cell constant (nominal) 1 in. diameter - 6/cm
2 in. diameter - 4/cm
Reference Manual Description and specifications
00809-0100-3222 September 2018
Rosemount 222 Sensors 7
Table 1-2: Temperature and Pressure
Flange Temperature range Maximum pressure
150 lb 5 to 182 °C (41 to 360 °F) 125 psig (963 kPa [abs])
300 lb 250 psig (1825 kPa [abs])
Table 1-3: Pressure (For CRN Registration Only)
Option Flange Diameter Maximum pressure
-01 150 lb 1 in. 125 psig (963 kPa [abs])
-02 2 in.
-05 300 lb 1 in. 200 psig (1480 kPa [abs])
-06 2 in. 250 psig (1825 kPa [abs])
-01-21 150 lb 1 in. 125 psig (963 kPa [abs])
Table 1-4: Weight/Shipping Weight (Weights are rounded up to the nearest 1 lb or 0.5 kg)
Flange Diameter Weight Shipping weight
150 lb 1 in. 11 lb (5.0 kg) 14 lb (6.5 kg)
300 lb 17 lb (8.0 kg) 20 lb (9.0 kg)
150 lb 2 in. 33 lb (15.0 kg). 37 lb (17.0 kg)
300 lb 35 lb (16.0 kg) 40 lb (18.0 kg)
1.4 Ordering information
Table 1-5: Rosemount™ 222 Flow Through Toroidal Conductivity Sensor Ordering
Information
Model Sensor type
222 Flow Through Toroidal Conductivity Sensor
Sizes (1)
01 1 inch, 150 lb flange
02 2 inch, 150 lb flange
05 1 inch, 300 lb flange
06 2 inch, 300 lb flange
Flange option
20 No selection
21 316 stainless steel outer flange (2)
Cable type
54 Standard integral cable (3)
Description and specifications Reference Manual
September 2018 00809-0100-3222
8 Reference Manual
Table 1-5: Rosemount™ 222 Flow Through Toroidal Conductivity Sensor Ordering
Information (continued)
Typical Model Number: 222-01-_-54
(1) Grounding rings are required for proper operation if the outer flanges of the Rosemount 222
sensor are substituted by the customer with non-conductive flanges. Order SQ 7430 and consult
the factory for pricing.
(2) Only available with option -01.
(3) Cables can be extended using remote junction box PN 23550-00 and extension cable.
Reference Manual Description and specifications
00809-0100-3222 September 2018
Rosemount 222 Sensors 9
Description and specifications Reference Manual
September 2018 00809-0100-3222
10 Reference Manual
Table des matières
Autres manuels Emerson Accessoires
Emerson
Emerson 203-5751 Manuel utilisateur
Emerson
Emerson Fisher 249W Manuel utilisateur
Emerson
Emerson Mobrey Electrosensor Manuel
Emerson
Emerson Rosemount 3051S Series Manuel utilisateur
Emerson
Emerson 210-2002 Manuel d'utilisation
Emerson
Emerson Rosemount 389 Manuel utilisateur
Emerson
Emerson 210-2000 Manuel utilisateur
Emerson
Emerson AutoSense II Inbound Standalone Manuel utilisateur
Emerson
Emerson 03100-0001-0001 Manuel utilisateur
Emerson
Emerson Micro Motion H Series Manuel utilisateur
Emerson
Emerson ER40 Manuel utilisateur
Emerson
Emerson Rosemount 396PVP Manuel utilisateur
Emerson
Emerson Rosemount 385 Manuel utilisateur
Emerson
Emerson EASYHEAT MSA-1 Instructions d'installation
Emerson
Emerson Wall-Mounted RH Sensor and RH Manuel d'utilisation
Emerson
Emerson Rosemount 372 Manuel utilisateur
Emerson
Emerson SpeedVue 430 Manuel utilisateur
Emerson
Emerson Rosemount 3200HP Manuel utilisateur
Emerson
Emerson AVENTICS ST6 Manuel utilisateur
Emerson
Emerson Rosemount 3051S Series Manuel utilisateur
