ELTEC CYBOX AP 2 Manuel utilisateur
Revision: 1.3 | Date: 11.05.2021
es
CYBOX AP 2
WIRELESS ACCESS POINT
CYBOX LTE 2
LTE ROUTER
INSTALLATION MANUAL
II
CYBOX AP 2 | CYBOX LTE 2
INSTALLATION MANUAL
es
LIST OF CHANGES
ISSUE
CHANGE DESCRIPTION
DATE
1.0
Initial Release
2021-03-30
1.1
Chapter correction
2021-03-31
1.2
Mechanical drawing correction
2021-04-27
1.3
Adaption of safety information and chapter mounting
2021-05-11
III
CYBOX AP 2 | CYBOX LTE 2
INSTALLATION MANUAL
es
DISCLAIMER
Copyright
© 2021 ELTEC Elektronik AG. The information, data, and figures in this document including respective
references have been verified and found to be legitimate. In particular in the event of error they may,
therefore, be changed at any time without prior notice. The complete risk inherent in the utilization of this
document or in the resultsof its utilization shall be with the user; to this end, ELTEC Elektronik AG shall not
accept any liability. Regardless of the applicability of respective copyrights, no portion of this document
shall be copied, forwarded or stored in a data reception system or entered into such systems without the
express prior written consent of ELTEC Elektronik AG, regardless of how such acts are performed and what
system is used (electronic, mechanic, photocopying, recording, etc.). All product and company names are
registered trademarks of the respective companies.
Our General Business, Delivery, Offer, and Payment Terms and Conditions shall otherwise apply.
SAFETY INFORMATION
Electrical safety
WARNING
The device can be operated with voltages over 75 V DC.
Incorrect handling risks causing a fatal electrical shock.
Before connecting the power supply, connect the device to protective earth.
General advice
Only qualified personnel is allowed to install, operate and maintain the devices.
Please take safety precautions against electrostatic discharge (ESD).
Access to the devices may only be granted to qualified personnel.
To prevent the risk of electric shock, turn off the external power supply and remove the power
supply cable from the electrical outlet before handling or disassembling the system.
When adding or removing devices to or from the system, ensure that the power cables for the
devices are unplugged before the signal cables are connected.
Make sure that your power supply is set to the correct voltage in your area. If you are not sure about
the voltage of the electrical outlet you are using, contact your local power company.
If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or
your retailer.
IV
CYBOX AP 2 | CYBOX LTE 2
INSTALLATION MANUAL
es
Operation safety
WARNING
The device can become very hot during operation (> 80 ° C).
Make sure it is protected from accidental contact.
The device must be installed so that it is not accessible to children.
To prevent burns, switch off the device and allow to cool down for half an hour
before disassembling or working on it.
Before installing the device and connecting cables to it, carefully read the related manuals.
Before using the device, make sure all cables are correctly connected and the power cables are not
damaged. If you detect any damage, contact your dealer immediately.
Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may
become wet.
Place the product on a stable surface.
If you encounter technical problems with the product, contact a qualified service technician or your
retailer.
Radio Frequency Exposure Statement
At least 20 cm separation distance between the antenna and the user’s body must be maintained at all
times.
RECYCLING
Please recycle packaging environmentally friendly:
Packaging materials are recyclable. Please do not dispose packaging into domestic waste but
recycle it.
Please recycle old or redundant devices environmentally friendly:
Old devices contain valuable recyclable materials that should be reutilized. Therefore please
dispose old devices at collection points which are suitable.
EU DECLARATION OF CONFORMITY
ELTEC Elektronik AG herewith declares that the device is compliant to the basic
requirements of the directive 2014/53/EU. The full text of the EU declaration of
conformity is available in the Download Center at www.eltec.com.
V
CYBOX AP 2 | CYBOX LTE 2
INSTALLATION MANUAL
es
CONTACT
ELTEC Elektronik AG
Galileo-Galilei-Straße 11
55129 Mainz
Germany
Fon +49 6131 918 100
Fax +49 6131 918 195
Email [email protected]om
www www.eltec.com
VI
CYBOX AP 2 | CYBOX LTE 2
INSTALLATION MANUAL
es
CONTENTS
1ABOUT THIS DOCUMENT 1
2OVERVIEW 2
2.1 Products 2
3HARDWARE 3
3.1 Device Connectors 3
3.1.1 Power Supply Connectors 3
3.1.2 Ethernet Interfaces 3
3.1.3 Antenna Connectors 4
3.2 Power Supply 5
3.2.1 Power Input 5
3.2.2 Power over Ethernet (PoE+) 5
3.3 M12 Service Interface (USB and Serial Port) 5
3.4 Front Panel and Module-to-Antenna Connections 6
3.4.1 Assignment Front Panel Labelling –Software 6
3.5 LED Indicators 7
3.5.1 Power LED Status 7
3.5.2 Fail LED Status 7
3.5.3 Module 1 LED Status 7
3.5.4 Module 2 LED Status 7
3.5.5 LAN LED (100 M | 1000 M) Status 8
3.6 Reset Switch 8
3.7 SIM Cards 8
4MOUNTING 10
4.1 Connecting an Earthing Cable 11
4.2 Electrical Connection 11
VII
CYBOX AP 2 | CYBOX LTE 2
INSTALLATION MANUAL
es
LIST OF TABLES
Table 1 Pin Assignment of Power Supply Connector (PWR) 3
Table 2 Pin Assignment of M12 Ethernet Connectors (LAN 1/2) 3
Table 3 Pin Assignment of M12 Service Connector 5
Table 4 Overview Front Panel Antenna Description 6
Table 5 Power LED Status 7
Table 6 Fail LED Status 7
Table 7 Module 1 LED Status 7
Table 8 Module 2 LED Status 7
Table 9 LAN LED Status 8
Table 10 Reset Switch Behavior 8
VIII
CYBOX AP 2 | CYBOX LTE 2
INSTALLATION MANUAL
es
LIST OF FIGURES
Figure 1 Picture of CyBox AP 2-W 2
Figure 2 Picture of CyBox LTE 2-W 2
Figure 3 Front Panel Overview 6
Figure 4 SIM Slot Assignment per Modem of the CyBox LTE 2 9
Figure 5 Dimensions of the CyBox AP 2 and CyBox LTE 2 Housing 10
Figure 6 Earth Cable Mounting on Earth Stud 11
1
CYBOX AP 2 | CYBOX LTE 2
INSTALLATION MANUAL
es
1ABOUT THIS DOCUMENT
This installation manual is intended only for system developers and integrators; it is not intended for end
users.
It describes the hardware functions of the product, connection of peripheral devices and integration into
a system. Additional information on special applications and the configuration of the product is available
in a separate configuration manual which can be downloaded from the Download Center at
www.eltec.com.
2
CYBOX AP 2 | CYBOX LTE 2
INSTALLATION MANUAL
es
2OVERVIEW
2.1 PRODUCTS
This installation manual comprises all information to set-up the following products.
Figure 1 Picture of CyBox AP 2-W
Figure 2 Picture of CyBox LTE 2-W
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels ELTEC Matériel réseau
Manuels Matériel réseau populaires d'autres marques
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuel utilisateur
Yudor
Yudor YDS-16 Manuel utilisateur
D-Link
D-Link ShareCenter DNS-320L Manuel utilisateur
Samsung
Samsung ES1642dc Instructions d'utilisation
Honeywell Home
Honeywell Home LTEM-PV Instructions de montage
