Elkron ER600 Manuel

On the website www.elkron.com, you may find

updated information relating to the documentation

provided with the product.

DS80WL24-004LBT80969

Installation and Configuration Manual

ER600

Radio Expansion

The information in this document were carefully assembled and controlled, but the company cannot in any case be held responsible for

potential errors or omissions.

The company reserves the right to make improvements or modifications to the products described in the manual at any time and

without advanced notice.

This manual may also contain references to or information about products (hardware or software) or services that are not yet on the

market. These references or information in no way mean that the company intends to market such product or services.

Elkron is a brand name of URMET S.p.A.

All the brands cited in the document belong to their respective owners.

ER600 Radio expansion.

Tel. +39 011.3986711 –Fax +39 011.3986703

www.elkron.com –mail to: [email protected]

Installation/Configuration ER600

TABLE OF CONTENTS

Table of Contents.................................................................................................................................................................................... 3

1 -ER600 for MP500/4N -MP500/8 - MP500/16 systemS ................................................................................................................. 6

Conventions used.................................................................................................................................................................................. 6

1.1 Maximun system syze for ER600 expansion.......................................................................................................................... 6

1.2 System components............................................................................................................................................................... 6

1.2.1 ER600 radio expansion 6

1.2.2 DC6002I Micro-contact 7

1.2.3 DC600 Micro-contact 7

1.2.4 IR600 IR detector for internal 7

1.2.5 IRT600 IR detector curtain effect 7

1.2.6 IM600 dual technology motion detector 8

1.2.7 IR detector for outside with EIR600 Pet Immunity 8

1.2.8 HP600 external siren with flashing 8

1.2.9 RC600 remote control 8

1.2.10 KP600 Led keypad 9

1.2.11 CP/EXP Container 9

2 -Basic information ....................................................................................................................................................................... 10

2.1 How an intrusion RADIO alarm system AND BUS is made.................................................................................................. 10

2.1.1 Radio and Bus system 10

2.1.1.1 Radio apparatus.......................................................................................................................................................... 10

2.1.1.2 The bus....................................................................................................................................................................... 10

3 -Design: configuration of the alarm system .............................................................................................................................. 11

3.1 How to design an alarm radio –bus system......................................................................................................................... 11

3.1.1 Positioning the system devices 11

3.1.1.1 Positioning the ER600 radio expansion...................................................................................................................... 11

4 -InstallaTion.................................................................................................................................................................................. 12

4.1 Installation procedure........................................................................................................................................................... 12

4.1.1 Battery compartment and fastening points for the ER600 in the MP500/4N - MP500/8 control panels 12

4.1.2 Assembling ER600 expansion in the MP500/4N - MP500/8 control panel 12

4.1.3 Assembling ER600 expansion in the MP500/16 control panel 13

4.2 Installation of the ER600 radio expansion............................................................................................................................ 13

4.3 Connections ......................................................................................................................................................................... 14

4.3.1 Connecting the data Bus 14

5 -COMMISSIONING........................................................................................................................................................................ 15

5.1 ACQUISITION OF BUS DEVICES....................................................................................................................................... 15

5.1.1 Position of the programming buttons 15

5.1.2 Procedure for acquiring bus devices 15

5.2 USING THE SERVICE KEYPAD.......................................................................................................................................... 16

5.2.1 Connecting the cable for KP SERVICE keypad 16

6 -MAINTENANCE ........................................................................................................................................................................... 17

6.1 MAINTENANCE PROCEDURE ........................................................................................................................................... 17

6.2 ADDITION AND ACQUISITION OF A NEW DEVICE BUS.................................................................................................. 17

6.3 REPLACING A BUS DEVICE............................................................................................................................................... 17

6.4 IDENTIFYING A BUS DEVICE............................................................................................................................................. 18

6.4.1 Interrogating a bus device 18

6.4.2 Searching for a device 18

6.5 DELETING A BUS DEVICE ................................................................................................................................................. 18

6.5.1 Deleting an ER600 radio expansion 18

6.6 ACQUISITION/ MAINTENANCE OF THE RADIO DEVICES............................................................................................... 19

6.6.1 Radio connection test 20

6.7 CONFIGURING RADIO PARAMETERS.............................................................................................................................. 21

6.8 DELETING A RADIO DEVICE ............................................................................................................................................. 21

6.9 RESETTING FACTORY SETTINGS.................................................................................................................................... 22

6.9.1 Partial reset 22

6.9.2 Global reset 22

6.9.3 Resetting hardware to factory settings 22

6.9.4 Resetting devices 22

6.10 TROUBLESHOOTING ......................................................................................................................................................... 23

7 -CONFIGURATION ....................................................................................................................................................................... 23

Conventions used................................................................................................................................................................................ 23

8 -Control devices........................................................................................................................................................................... 24

8.1 RC600 remote control .......................................................................................................................................................... 24

Installation/Configuration ER600

8.2 KP600 KEYPAD................................................................................................................................................................... 25

9 -System commissioning.............................................................................................................................................................. 26

9.1 Wireless input programming................................................................................................................................................. 26

9.1.1 Wireless input encoding 26

9.1.2 Wireless input types 26

9.1.3 Wireless input customisation 26

9.1.4 Isolable 26

9.1.5 Ancillary functions (Gong, Courtesy Light, Door Opener, Absence of Move) 27

9.1.6 Input attributes (Release Type, AND / OR partitions) 27

9.1.7 AND inputs 27

9.1.8 Programming procedure 27

9.2 Wireless output programming............................................................................................................................................... 29

9.2.1 Wireless output encoding 29

9.2.2 Wireless output customisation 29

9.2.3 Status report 29

9.2.4 Programming procedure 30

9.3 RC600 remote control programming .................................................................................................................................... 31

9.4 KP600 keypad programming................................................................................................................................................ 33

9.5 RADIO DEVICES TEST....................................................................................................................................................... 35

9.5.1 Test 35

10 -System commissioning.............................................................................................................................................................. 36

10.1 Arming using RC600 remote control .................................................................................................................................... 36

10.1.1 Total arming 36

10.1.2 Partial arming 36

10.2 Disarming using RC500 remote control................................................................................................................................ 36

10.2.1 Disarming 36

10.3 Direct access function keys.................................................................................................................................................. 36

10.3.1 RC600 remote control programming key 36

10.4 Arming using KP600 KEYPAD............................................................................................................................................. 37

10.4.1 Total arming 37

10.4.2 Partial arming 37

10.5 Disarming using KP600 KEYPAD ........................................................................................................................................ 37

10.5.1 Disarming 37

10.6 Direct access function keys.................................................................................................................................................. 37

10.6.1 KP600 keypad programming key 37

10.7 SYSTEM STATUS INFORMATION ..................................................................................................................................... 37

10.7.1 Viewing the system status on KP600 keypad 37

11 -Maintenance................................................................................................................................................................................ 38

11.1 How to upgrade bus device firmware from menu ................................................................................................................. 38

11.1.1 Necessary conditions 38

11.1.2 Upgrade file 38

12 -Tables .......................................................................................................................................................................................... 39

12.1 IDP message structure......................................................................................................................................................... 39

12.2 Factory settings.................................................................................................................................................................... 40

12.2.1 Radio expansion module inputs 40

12.2.2 Radio expansion module outputs (sirens) 40

13 -TECHNICAL SPECIFICATIONS.................................................................................................................................................. 41

13.1 ER600 RADIO EXPANSION................................................................................................................................................ 41

13.2 DC600 SLIM microcontact.................................................................................................................................................... 41

13.3 DC600 2I microcontact......................................................................................................................................................... 41

13.4 IR600 IR DETECTOR FOR INDOORS ................................................................................................................................ 41

13.5 IRT600 IR DETECTOR CURTAIN EFFECT......................................................................................................................... 42

13.6 EIR600 EXTERNAL IR DETECTOR WITH PET IMMUNITY FUNCTION ................................................................................ 42

13.7 IM600 INDOOR DUAL TECHNOLOGY DETECTOR........................................................................................................... 43

13.8 HP600 EXTERNAL SIREN WITH FLASHING...................................................................................................................... 43

13.9 RC600 remote control .......................................................................................................................................................... 43

13.10 KP600 KEYPAD................................................................................................................................................................... 43

Installation/Configuration ER600

FIGURE INDEX

Figure 1 - Fastening points for optional features in the MP500/4N - MP500/8 control panels................................................................. 12

Figure 2 –Fastening points for optional features in the MP500/4N - MP500/8 control panels................................................................ 12

Figure 3 - ER600 radio expansion........................................................................................................................................................... 13

Figure 4 - Connections via bus................................................................................................................................................................ 14

Figure 5 - Position of the programming buttons....................................................................................................................................... 15

Figure 6 - Radio devices menu diagram.................................................................................................................................................. 19

Figure 7 - Radio connection test menu.................................................................................................................................................... 20

Figure 8 –RC600 remote control............................................................................................................................................................ 24

Figure 9 - KP600 led keypad................................................................................................................................................................... 25

TABLE INDEX

Table 1 - Radio technology (tips)............................................................................................................................................................. 10

Table 2 - ID code or input with IDP protocol............................................................................................................................................ 39

Installation/Configuration ER600

1 - ER600 FOR MP500/4N -MP500/8 - MP500/16

SYSTEMS

CONVENTIONS USED

For clarity, the manual applies the following conventions:

This symbol signals an important warning.

This symbols signals a recommendation.

1.1 MAXIMUN SYSTEM SYZE FOR ER600 EXPANSION

The maximum number of radio expansions that can be installed on the MP500/xx systems is listed below. For each device, the

maximum individuals and combinations are indicated when the system comprises similar devices.

Radio expansion ER600

MP500/4N system - max number = 1 MP500/8 system - max number = 2

MP500/16 system - max number = 2

The maximum number of radio frequency devices that can be managed by each expansion is 16 IR detectors and/or magnetic

contacts, 2 sirens, 8 remote controls and 8 radio keypads.

WARNING The number of radio expansions must be taken into account to determine the maximum number of radio

expansions (for example, the MP500/8 allows the connection of up to 7 extensions and if 6 wired expansions are connected,

then only 1 radio expansion can be connected; on the other hand, if 5 wired expansions are connected, up to 2 radio

expansions can be connected).

1.2 SYSTEM COMPONENTS

WARNING! The installation of the radio expansion or radio devices results in the loss of EN50131 certification.

WARNING! The ER600 expansion can be installed on the control panels running SW 1.05 version or higher. ER500 and

ER600 radio expansions cannot be connected to the same control panel.

1.2.1 ER600 radio expansion

Optional radio module that makes it possible to integrate, with the SW 1.05 or later, radio devices

like infra-red detectors, magnetic contacts, sirens, remote controls and radio keyboards in the

wired MP500/4N, MP500/8, and MP500/16 control panels.

The radio expansion module is connected via bus and is equipped with an antenna and 868 MHz

receiver/transmitter apparatus for two-way radio communication with the combined radio devices.

The MP500/4N control panel can manage a radio expansion module, while the MP500/8 and

MP500/16 control panels can manage up to 2 of them, each of which can manage up to:

16 IR detectors and/or magnetic contacts;

2 sirens;

8 remote controls;

8 radio keypads.

For radio devices that can be combined with ER600 radio expansion modules, please see the

Elkron catalogue.

Installation/Configuration ER600

1.2.2 DC6002I Micro-contact

A magnetic contact detector to monitor the opening and closing status of the door or window

where it is installed. It has wired inputs which may be used to connect a NC (Normally Closed)

contact of a wired device or a shutter or rolling blinds opening detector (use of wire contacts for

rolling blinds Elkron MF01 and MF02 is recommended).

It is powered by a lithium battery and communicates via radio with the ER600 two-way radio

module.

It is programmed by a jumper. A tamper guarantees protection against opening and removal. The

device has test, supervision, battery low signal, and LED to signal radio communication.

Available also in brown (DC6002I/BR).

Note: this device can be used in combination with an ER600 radio expansion.

1.2.3 DC600 Micro-contact

Mini magnetic contact detector to monitor opening/closing of specific devices (e.g. a door or a

window). The contact is fixed onto the door or window frame, while the actuation magnet must be

fixed onto the door or window itself. When the door or window is opened, the magnet moves away

from the contact making the inner magnetic switch trip and activating the sending of an alarm

signal to the control panel. The device can also send information on faults and flat battery

indications.

It is powered by a lithium battery and communicates via radio with the ER600 two-way radio

module.

A tamper guarantees protection against opening and removal. The device has test, supervision,

battery low signal, and LED to signal radio communication.

Available also in brown (DC600/BR).

Note: this device can be used in combination with an ER600 radio expansion.

1.2.4 IR600 IR detector for internal

A passive infra-red detector to detect movements in the area it monitors.

It is powered by a lithium battery and communicates via radio with the ER600 two-way radio

module.

A tamper guarantees protection against opening and removal. The device has test, supervision,

battery low signal, and LED to signal radio communication

The device can be installed in an angular position by means of the bracket provided.

Note: this device can be used in combination with an ER600 radio expansion.

1.2.5 IRT600 IR detector curtain effect

Detector with passive infrared (PIR) motion sensor capable of detecting movements in an

assigned area and indicate them to the control panel to activate the intrusion alarm.

The base of the product is provided with holes for installing it on a flat surface or in a corner.

The detector has a single tamper micro switch which is activated when the lid is opened.

Furthermore, it can send a warning to indicate a communication problem or flat battery conditions.

The detector is designed to work within a detection field of 8 metres.

Note: this device can be used in combination with an ER600 radio expansion

Installation/Configuration ER600

1.2.6 IM600 dual technology motion detector

The detector implements infrared (PIR) and microwave (MW) motion detection technology. The

combination of the two detection methods considerably reduces the false alarm rate, employing

PIR as initial detection and of microwaves for confirmation before sending the alarm signal.

Note: this device can be used in combination with an ER600 radio expansion

1.2.7 IR detector for outside with EIR600 Pet Immunity

Outdoor detector with double passive infrared (PIR) motion sensor which minimises the risk of

false alarms caused by small animals, cars or other external interferences, making it easy and

practical to use.

The automatic temperature sensitivity adjustment guarantees optimal performance regardless of

environmental changes or external interferences.

Furthermore, the global detection range efficiently adapts to all installation environments.

Note: this device can be used in combination with an ER600 radio expansion

1.2.8 HP600 external siren with flashing

This siren is suitable for internal installation and sounds an alarm and gives a visual stroboscopic

light signal when it receives the relative alarm signal from the ER600 radio module.

The programming of the siren and the sounding time is done by the DIP switch.

A tamper guarantees protection against opening and removal.

The device has testing and supervision functions and signals low or dead batteries.

Note: this device can be used in combination with an ER600 radio expansion

1.2.9 RC600 remote control

The remote control is powered by a lithium battery and communicates via radio with the ER600

two-way radio module.

The device has a two-tone LED to signal the command transmitted and a low battery.

The remote control has 4 programmable keys, three keys for the arming and disarming of

associate partitions and one key that can be configured to enable and disable potential outputs

that can be commanded or generate other types of signals.

Note: this device can be used in combination with an ER600 radio expansion

Installation/Configuration ER600

1.2.10 KP600 Led keypad

The led keypad is powered by a lithium battery and communicates via radio with the ER600 two-

way radio module.

It has 4 function keys, three keys for the arming and disarming of associate partitions and one key

that can be configured to enable and disable potential outputs that can be commanded or

generate other types of signals.

Note: this device can be used in combination with an ER600 radio expansion

1.2.11 CP/EXP Container

Container for ER600 expansion module.

It comes equipped with a tamper device against opening and remove.

Installation/Configuration ER600

2 - BASIC INFORMATION

2.1 HOW AN INTRUSION RADIO ALARM SYSTEM AND BUS IS MADE

2.1.1 Radio and Bus system

This main distinction between installations is based on the technology used to connect the various devices to the control panel and

each other. The radio system connection is also called wireless.

Pros

Cons

Requires no wiring: all communications occur via radio and

components can be positioned where it is most convenient.

It is sensitive to radio shielding: some materials can affect the

radio waves, impeding or making communication more difficult

among the various devices.

The devices can be easily moved if the need should arise, for

example if the arrangement of furniture should change in a room

protected by a volumetric detector.

It is more sensitive to sources of electromagnetic disturbances

(ex. electric meters, electric motors, washing machines,

refrigerators, etc.), which may make communications among the

various devices difficult.

It is possible to create a system where all the components are

the system to the electrical power supply *.

It is necessary for at least one radio channel to be free (in other

words, one channel with no other systems using it).

Quick installation: it is sufficient to install the system components

where needed, with no need to wire them.

Installation times are considerably shorter, so as not to create

inconveniences in the home or workplace.

*Not all manufacturers have radio alarm systems that can function entirely without being connected to the electrical utility.

Table 1 - Radio technology (tips)

Radio technology is particularly indicated:

in inhabited buildings or where it is not possible to intervene on the wall structure;

where wiring can be particularly costly and difficult;

for temporary intrusion alarm systems.

2.1.1.1 Radio apparatus

There are two types of radio apparatus used in the alarm systems: those that allow the system to connect to the external environment,

like the radio modules for the cell phone network, and those that allow wireless communications within the system, mainly between

radio devices and the control panel.

It is important to verify that the radio devices of the alarm system use the specific frequencies established by legislation and that they

are capable of using more than one radio channel.

Some may ask: can these radio devices create disturbances for other equipment present? Are all these electromagnetic waves

harmful?

The answer to the first question is very simple: the conformity with laws practically excludes this type of problem.

The same is true for the second question, but in this case it is better to analyse the topic in more detail. Above all, the radio devices

transmit with extremely low power; secondly they mainly work as receivers and transmit only when necessary and for durations of just

a few seconds. In other words: they almost never transmit and so do not emit electromagnetic waves; when they must do so it is only

for very brief moments and very low power.

2.1.1.2 The bus

A particular type of connection is the bus, which can be either wired or radio. It is essentially a channel of communication that transfers

data and information among the various devices of the system, guaranteeing their interaction.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Elkron Radio

Elkron

Elkron ER500 Manuel utilisateur

Elkron

Elkron ELR60RT Manuel de référence

Manuels Radio populaires d'autres marques

EisSound

EisSound KBSound iSelect Manuel utilisateur

Midland

Midland 1001LWX Manuel utilisateur

Konig

Konig HAV-SR41 Manuel utilisateur

Roberts

Roberts exprssion Manuel utilisateur

VDigi

VDigi DD3.0 Manuel utilisateur

Radio Shack

Radio Shack 21-1863 Manuel utilisateur

Roberts

Roberts Stream 207 Manuel utilisateur

Sony

Sony Walkman SRF-M97 Manuel utilisateur

Stanley

Stanley FatMax FMC770 Manuel utilisateur

auna

auna DAB-Radio 10026947 Manuel utilisateur

SOUNDMASTER

SOUNDMASTER UR190 Manuel utilisateur

HYT

HYT TC-320 Manuel utilisateur

auna multimedia

auna multimedia Yellowstone 10026851 Manuel utilisateur

B-Tech

B-Tech GMRS-V2 Manuel utilisateur

Weierwei

Weierwei VEV-V8 Manuel utilisateur

SOUNDMASTER

SOUNDMASTER DAB750 Manuel utilisateur

Telefunken

Telefunken TF-1505 Manuel utilisateur

Makita

Makita LXRM03 Manuel utilisateur