Elitech EL-025 Manuel utilisateur
BASE(×1)
D
TUBE
L=400mm(×1)
C
CABLE CLIP(×1)
E
76
LCD MOUNT
76mm(×2)
B
SPRING WASHER
5/16"(×2)
1
WASHER
8*
13(×2)
2
NYLON NUT
5/16"(×2)
3
WASHER
12.5*
25*T=3(×2)
4
SCREW
M4*P0.7*L12mm
(×8)
9
FOR LCD monitor
9
A
To install LCD Mount(B) in the back of monitor:
Locate mounting screw fixtures on the back
of monitor and attached LCD mount(B) with screw(9).
Make sure the screw(9) match to
your monitor hole to fix the LCD Mount(B).
ALLEN WRENCH
NO.3(×1)
6
ALLEN WRENCH
NO.4(×1)
7
WRENCH
NO.13(×1)
8
FOLD ARM(×1)
A
BRAKE SCREW
M6*P1.0*L6mm(×2)
5
EL-025
Component list
A
E
To route your cable from the cable case
which inside of the Fold arm(A) and the
cable clip(E) for a tidy look.
STEP 4
D
E
F
STEP 3
B
A
4
2
1
3
Installing LCD Mount(B) to Fold arm(A).
8
6
3
4
7
C
E
D
STEP 1
5
A
C
STEP 2
Put the Fold arm(A) through the Tube(C).
To adjust the height of Fold arm(A)
with Allen wrench(7).
Assembly step
Installing Tube(C) on the base(D) and
then put on the Cable clip(E) on
the tube for cable management.
Fixed the brake screw(5) with Allen
wrench(6) to avoid rotation of the tube.
Answer:
Please follow steps below to set the tilting angle
Use a flat-blade screwdriver
to push open the caps.
2.
1.
Locate the two caps which
are on each side of the axis
of the monitor bracket.
3.
Loosen the nut adjust
the tilting angle then
tighten the nutadain.
loose
tighten
WRENCH NO.13
30
90
1.
2.
SCREWDRIVER
Why my monitors keep flopping?
Autres manuels Elitech Support et étagère
Manuels Support et étagère populaires d'autres marques
Salamander
Salamander Acadia AC/W/L400/WH Manuel utilisateur
Fohhn
Fohhn VAT-09 Guide de l'utilisateur
ricoo
ricoo FS0522 Manuel utilisateur
AMSOIL
AMSOIL BMK-22 Guide rapide
Kargo Master
Kargo Master 48220 Manuel utilisateur
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur
