IMPORTANT SAFETY INFORMATION:
! WARNING! Not following these instructions may cause severe damage to the unit
9 ELIKA TECHNICAL SUPPORT 1.949.208.3600
GENERAL SAFETY PRECAUTIONS
These instruction must be kept and forwarded to all possible future users of the system.
This product must be used only for that which it has been expressly designed.
Any other use is to be considered improper and therefore dangerous.
The manufacturer cannot be held responsible for possible damage caused by improper,
erroneous or unreasonable use and/or installation.
In case of break down or malfunctioning of the product, disconnect from the main power source.
Do not attempt to repair or intervene directly, contact only qualified personnel for repair.
Failure to comply with the above may create a situation of danger.
All cleaning, maintenance or repair work must be carried out by qualified personnel.
All installation, maintenance and repair work must be documented and made available to the user.
The following precautions are an integral and essential part of the product and must be supplied to
the user. Read them carefully as they contain important indications for the safe installation, use and
maintenance.
1.
2.
3.
4.
5.
6.
7.
IMPORTANT INSTALLATION INFORMATION
Verify the coverage area map from AT&T by visiting www.att.com
Verify the reception sensitivity with AT&T by visiting www.att.com
Install the unit so it can receive proper carrier signal
See Appendix C on Page 32-33
Do not use a cable longer than 400 feet
Use a continuous length of cable, do not splice
Properly test the cable after installation
See VoIP Over Ethernet Setup on Page 22
Verify a strong signal strength at the installation location
See VoIP Over Wi-Fi Connectivity Setup Using Android on Page 21
See VoIP Over Wi-Fi Connectivity Setup Using Apple on Page 22
FOR CELL MODULE INSTALLATIONS
FOR VoIP MODULE INSTALLATIONS
Ethernet Installation
Wi-Fi Installation
