Eli Ezer ECP-9000 Guide de démarrage rapide

A u t o C h a r t P r o j e c t o r E C P - 9000

Operational Manual

ECP-9000

Table of Contents
 
 
 
 
Introduction .......................................................................1 
Package Contents .............................................................1 
Classifications ...................................................................2 
Designated Symbols ..........................................................3 
Safety Instructions .............................................................4 
Configurations ...................................................................6 
Installation.........................................................................9 
Focusing .........................................................................10 
Operating Instructions......................................................11 
Charts Description .........................................................12 
Maintenance ..................................................................16 
Basic Trouble Shooting ..................................................17 
Transportation ...............................................................17 
Technical Specifications .................................................18 
Service Information ........................................................19 
 
 
 
 

-1-

1. Introduction

Thank you for your purchase of the ELI EZER ECP-9000 Auto Chart Projector. In the

area of subjective refraction, the ELI EZER ECP-9000 is best used for measuring

visual acuity. There are 40 different charts including red/green and polarized filters for

the eye optometry. It is fully recommended that you carefully read, understand and

follow the steps in this manual in order to ensure safe operation, optimum

performance and a longer service life from your new instrument. Please retain this

manual for future reference.

2. Package Contents

ECP-9000 and accessories were carefully checked and packed prior to the shipment.

However, please check condition and contents upon delivery. In addition to ELI EZER

ECP-9000, this shipment includes:

-2-

3. Classifications

[ Classification under the provision of 93/42/EEC(MDD)] ClassⅠ

ECP-9000 is classified into ClassⅠsystem.

[Protection method against electric shock] ClassⅠ

ECP-9000 is Classified into ClassⅠinstrument.

ClassⅠinstrument in which protection against electric shock does not rely

on basic insulation only, but which includes an additional safety precaution

with the provision of the connection of the instrument to the protective

earth conductor in fixed wiring of the installation in such a way that any

accessible conductive parts cannot become live in the event of a failure

of the basic insulation.

[Degree of protection against ingress of liquids] IPX0

ECP-9000 is the ordinary instrument (enclosed instrument without

protection against ingress of liquids). Be careful not to splash water

on the instrument.

[Degree of protection against flammability]

ECP-9000 is classified as an equipment not suitable to be used in a

Potentially flammable anesthetic mixture with air or with oxygen

or nitrous oxide.

Do not use near flammable materials.

[Mode of operation]

Continuous operation

-3-

4. Safety Symbols

Symbol

Description

This symbol indicates a protective earth

This symbol indicates that important operation, caution, warning and

maintenance Instructions are included in this User’s Guide.

This symbol on the main switch indicates that the power is OFF.

This symbol on the main switch indicates that the power is ON.

Instruction for user manual

Operating instructions

Manufacturer

Date of Manufacturer

Authorized Representative in the European community

This symbol indicates a fuse.

Do not throw away the waste to inappropriate place

For EU Countries

The following mark, the name & address of the EU Representative shows compliance

of the instrument with Directive 93/42/EEC.

EU Representative:

Ellegi Medical Optics s.r.l.

Via Pisciarelli, 79 – 80078

Pozzuoli (NA) ITALY

TEL:081.5499645 - 081.5498044

Partita I.V.A. 05354730631

-4-

5. General Safety Information

At Operation

- To avoid risk of electric shock, this equipment must only be

connected to a supply main with protective earth.

- Never disassemble or touch the inside of the instrument.

“No modification of this equipment is allowed”

“Do not modify this equipment without authorization of the

manufacturer”

“If this equipment is modified, appropriate inspection and testing

must be conducted to ensure continued safe use of equipment”

This may result in an electric shock or instrument malfunction.

-Never yank the power cord to disconnect from wall outlet but hold

the plug while disconnecting.

-This can weaken the metal core of the cord and may result in a

short circuit or an electric shock.

- Temperature : +10℃ ~ +40℃

- Humidity: 30% ~ 90% RH

- Atmospheric pressure range: 700 hPa ~ 1060 hPa

At Storage

- Do not store the instrument in a place where it may get wet or

where poisonous gas or liquid is stored.

- Avoid storing the instrument in an area with excessive heat,

humidity, or dust.

Recommended ranges:

- Temperature : -10℃ ~ +70℃

- Humidity: 10% ~ 95% RH

- Atmospheric pressure range: 500 hPa ~ 1060 hPa

At Installation

- Do not install the instrument near water.

If water gets into the internal structure, there is the possibility of

electrical Shock or instrument malfunction.

- Install the instrument in a stable and level place where vibration or

shock does not occur.

-5-

-The instrument may not perform observation correctly or may

malfunction. Also, if the instrument is tripped over because of any

accidental shock, it may result in possible injury.

After Use

- If the instrument is not be used for a long time, disconnect the

power cord from the wall outlet. Otherwise, it may cause a tire.

- Remove batteries from the battery case of the remote controller

when the remote controller will not be used for a long time.

At Disposal

- Follow local governing ordinances and recycling plans regarding

disposal or recycling of device components.

- Check the specified disposing method for the specific waste in

advance, especially when disposing the batteries used in the

remote controller.

- When disposing packing materials, sort them by the materials and

follow local governing ordinances and recycling plans.

-6-

6. Configurations

[Fig.1 Front View]

[Fig.2 Bottom View]

1. Projection lens / Focusing wheel

2. Receiving window

3. Table stand

4. Pilot Lamp

-7-

[Fig.3 Rear View]

5. Power On/Off Switch

6. AC Power Inlet

7. Fuse Holder

8. RS-232 Port

-8-

[Fig.4 Remote control View]

9. Inflated ray transmitter

10. Letters chart

11. Number chart

12. Snellen chart

13. Program

14. Lamp ON/OFF

15. Vertical, horizontal line, single Letter Masking

16. Children chart

17. Landolt chart

18. Function chart

19. Red/Green Test

20. Direction

Table des matières

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur