4
Before further use of the compressor, a guard or other part is damaged
should be carefully checked to determine that it will operate properly and
perform its intended function.
Check for alignment of moving parts, binding of moving parts breakage of
parts, mounting, air leak, and any other conditions that may affect its
operation.
A guard or other part that is damaged should be properly repaired or
replaced by an authorized service centre unless otherwise indicated
elsewhere in this Instruction Manual. Have defective pressure switches
replaced by authorized service centre. Do not use compressor if switch
does not turn it on and off.
Handle compressor correctly
Operate the compressor according to the instructions provided herein.
Never allow the compressor to be operated by children, individuals
unfamiliar with its operator or unauthorized personnel.
Keep all screws, bolts and cover tightly in place
Keep all screws, bolts and plates tightly mounted. Electrical
connections to be ensured for tightness. Check their conditions
periodically.
Keep motor air vent clean
The motor air vent must be kept clean so that air can freely flow at all
times. Check for dust build-up frequently.
Electrical installation
This compressor motor and starter should properly grounded with correct size
copper wire to avoid electrical shock and damage to the equipment.
The correct rating of fuses to be provided at the incoming side of the
Starter
The correct rating of wires to be used for incoming connection and length
of the cable to be less than 5 mtrs.
Never take any loop lines from the compressor wiring.
Safety instructions
Avoid electrical shock hazard. Never use this
compressor with a damaged or frayed electrical cord or
extension cord. Inspect all electrical cords regularly. Never
use in near water or in any environment where electric
shock is possible.
WARNING
