6 | DE Ⓒelero GmbH Ⓒelero GmbH DE | 7
The Unio-868 can be operated via a button at the device
itself as well as via the radio hand-held sender that belongs
to the elero ProLine or ProLine 2-production range.
Programmed data (e.g. via taught-in transmitters) are per-
manently retained in an integrated memory (also at mains
failure, storage of the programmed Unio-868 without volt-
age supply or change of the mains outlet).
Further elds of application have to be arranged with the
manufacturer, elero GmbH Antriebstechnik (see Chapter 8,
Manufacturer's Address).
The operator will be solely responsible for damage resulting
from improper use of the Unio-868. The manufacturer can-
not be held liable for personal or material damage caused
by misuse or procedural errors, and by improper operation
and commissioning.
A use which deviates from the intended use stated by the
manufacturer, elero GmbH Antriebstechnik, is deemed as
foreseeable misuse.
Please read the instructions completely and carefully once
before rst commissioning; they contain many notes on the
intended use of the Unio-868.
1.4 Warranty and liability
Principally, the General Terms and Conditions of the manu-
facturer, elero GmbH Antriebstechnik (see Chapter 8,
Manufacturer's Address for address), apply. Liability claims
for personal or material damage are excluded when they
can be attributed to one or more of the following causes:
• Opening of the Unio-868 by the customer
• Non-intended use of the Unio-868.
• Improper commissioning or operation of the Unio-868.
• Structural modications to the Unio-868 without the writ-
ten consent of the manufacturer.
• Operation of the Unio-868 with improperly installed con-
nections, defective safety devices or improperly installed
safeguards.
• Non-observance of the safety provisions and instructions
of these Operating Instructions.
• Operation of the Unio-868 outside the limits specied in
the Specications.
2 Safety
The Unio-868 is not intended to be used by people (in-
cluding children) with limited physical, sensory, or mental
aptitude, or lack of experience and/or knowledge, unless
they are supervised by a person responsible for their safety
or have received instruction from this person as to how the
Unio-868 is used.
• Never allow children to use electrical devices unless
they are supervised.
2.1 General safety instructions
The Operating Instructions contain all safety instructions
which must be observed in order to prevent dangers inher-
ent to handling the Unio-868 in connection with the compo-
nents to be switched. A safe use of the Unio-868 can only
be ensured when all given safety instructions are observed.
The Unio-868 is maintenance-free.
• Do not open the Unio-868; it does not contain any parts
that need to be serviced by you.
• Only operate the Unio-868 in dry inner rooms and avoid
inuence of moisture, dust and direct sunlight. Avoid any
wetness or high humidity, extreme cold or heat, dust or
ammable gases, steams or solvents, strong vibrations
and strong magnetic elds at the site of use or during
transport.
