ELEKTROBOCK PT23 Manuel utilisateur

PT23

• for all types boilers with

ON / OFF

• weekly program (preset)

• 6 temp. changes per every

day

• anti-freeze mode

• easy installation

• modern design

•

for all types boilers with

•

LARGE WELL-ARRANGED DISPLAY

WITH TOUCHING CONTROL

ROOM THERMOSTAT

WITH BACKLIT DISPLAY

DESCRIPTION

PT23 is digital room thermostat with backlit display for automatic regulation of heating.

Its advantages involve a quick change in the desired temperature by simply press the button, and

possibility of setting up to weekly program with 6 temperature changes per day.

INSTALLATION

LOCATION

Install the thermostat at a suitable place where its operation cannot be affected by direct  ow of

hot air from the heater, sunshine or other disturbing effects. Do not install it on an external wall

either. The installation height should be approx. 1.5 m above the  oor. Place the thermostat in

the “reference room”, such as the living room (the heating source will switch according to the

temperature in this room).

1. Switch off the main circuit breaker.

2. Remove the control part from the lower cover of the device (Fig.1).

3. Chip away the central plastic piece from the lower cover to lead in conductors.

4. Run the conductor through the hole and connect it to the terminal acc. to the diagram.

5. Fasten the lower cover to the wiring box with screws (Fig. 2).

6. Batteries are located at the back of the control part. Remove their protective paper (on  rst use), or insert new

batteries (Fig. 3).

7. Mount the control part on the lower cover.

8. Switch on the main circuit breaker and test correct connection of the thermostat, see page 5 (TEST).

9. Upon  rst start (or reset), the thermostat displays “SET CLOCK”, set the current time and date according to page 4.

Wiring diagram:

Backlit display

if any button is

pushed, the backlit

switches on

automatically for 5 s

at least

Control elements

by pressing

= con rmation of

value chagne

by pressing

=entering of main

menu or one step

back

by pressing

= changing the

set value

*The thermostat terminals

are marked differently with

every type of boiler.

Therefore, follow the

wiring prescribed

by the boiler

manufacturer!

BOILER

TEMP. IN AUTO

TEMP. IN MANU

Fig.1

HINTS FOR THE USER

Fig.2

Fig.3

alkal.battery

1,5 V / AA

alkal.battery

1,5 V / AA

QUICK CHANGE OF THE DESIRED TEMPERATURE

Press the „ “ button twice, the desired temperature starts blinking

on the display. With buttons „ “ change the required temperature

and press the „ “ button.

In the AUTO mode, the change lasts until the next program

change.

In the MANU mode, the change is permanent.

BATTERY REPLACEMENT

As soon as „ “ appears on the display, you must replace the

batteries.

1.Remove the control part from the lower cover of the device (Fig. 1).

2.Replace the batteries. Heed the correct polarity marked in the

battery compartment (Fig. 3). After removing the batteries, all

setting of the thermostat are saved in the memory

20 sec, only!

Always use the type AA, 2 x 1.5 V, alkaline batteries!

Recommendation: Check the batteries before every heating season!

Dispose of old batteries in conformity with regulations on hazardous

waste treatment!

The device can only be installed by a person with adequate qualication!

The installation must be executed in a voltage-free state!

Fig.3

AUTO MOdE

MANUAL MOdE

OFF MOdE

HOLIdAY

SET TEMP.

SET TIME

SET HOUR

OPERATIONAL MODES

The rst push of any button activates the display backlight. Pushing the „ “ button

shortly again, you open the main menu where you can choose the operational mode.

AUTO

The thermostat works according to the weekly program pre-

set (this program can be changed; see PROG for detailed

description).

MANU (the 21 °C temperature is factory - set).

The thermostat works according to the temperature preset

until the next manual change.

OFF

The thermostat is off until the next manual change of the

mode.

HOLIDAY

The thermostat keeps the temperature preset until the given

date. When the preset time lapses, it automatically returns to the

last-selected AUTO/MANU mode before the holiday.

Press the „ “ button twice, using the „ “ buttons

choose the AUTO-Mode and conrm with the „ “ button.

(weekly program is factory-set, see page 8)

Press the „ “ button twice, using the „ “ buttons

choose the MANU-Mode and conrm with the „ “ button.

(anti-freeze temperature of 3 °C is kept – can not be changed)

Press the „ “ button twice, using the „ “ buttons

choose the OFF-Mode and conrm with the „ “ button.

Press the „ “ button twice, with buttons „ “ choose the

and conrm with the „ “ button. Stepwise, set the temperature

which the thermostat should keep during the holiday, and date of

your return from the holiday. Using the „ “ buttons

make the change of value and always conrm them pushing the

„ “ button.

When the setting is nished, press the „ “ button to return to the

basic screen.

Note: You can cancel the holiday mode any time by choosing

another AUTO or MANU mode.

CLOCK SETTING

Setting the current time and date.

Press the „ “ button twice, by using„ “ choose CLOCK-MODE

and conrm with the „ “ button.

Using the „ “ button make the change of value. Always

push the„ “ button to conrm (the value set is always ashing;

the „ “ button returns you to the menu).

RELAY TEST

SOUNd OF bU

yYES

PROG

Setting the weekly program with up to 6 changes per day.

CONST

Setting the control parameters.

ENGLISH

The hysteresis can be set from 0,1 to 6°C. Example: If the hyste-

resis is 1 °C and the required temperature 20 °C, the thermostat

switches off at 20 °C and on again at 19 °C. By using “ “

buttons set required value and press the “ “ button to conrm.

4TOUCH SOUND

Press twice the“ “button, by using “ “ buttons choose the PROG mode

and press the“ “button to conrm. The number of days to be programmed is

ashing on the display, by using “ “ buttons choose on of the option (you

can program day-by-day or 1-5 = Mon-Fri, 6-7 = Sat-Sun or 1-7 =Mon-Sun) and

press the“ “ button to conﬁrm.

The 1st change time starts ashing, by using “ “ buttons set time and

press the“ “ button to conrm. To this time assign with “ “ buttons the

temperature and press again the“ “ button to conrm. The 2nd change time

appears on the display. Proceed in the same way as with the rst change setting. In

this way, you can set up to 6 temperature changes per day. To return to

the menu, press the “ “ button. After changing the preset program, check

whether all the changes made conform to your requirements!

It is not necessary to apply all six changes in one day!

Press twice the “ “ button, by using “ “ buttons choose

CONST mode and press the“ “ button to conrm.

Language selection (CZ/PL/EN/DE/RU/SK).

By using “ “ buttons choose languge and press the“ “

button to conrm.

HYSTERESIS

TEST

We recommend you to use the test when you rst use the

thermostat!

By using “ “ the test starts and the output relay is switched

on/off several times (the display shows the ON/OFF message)

Pressing the “ “ button, you can view the next constant; to

return to the main menu press the “ “ button.

By using“ „ buttons you can switch on and off the sound of

buttons.

(PROGRAMMING)

(CONSTANTS)

(English language set by default)

(0.5°C set by default)

PROGRAMMING

SELECT dAY

TIME CHANGES

CONSTANTS

ENGLISH

HYSTERESIS

6789

sSET TIME

1. Current day (in the Prog

mode, selection of days to be

programmed)

2. Heating on indication

3. Current room temperature

4. Anti-freeze temperature

5. Modes for setting programs

(PROG) and constants (CONST)

6. Automatic mode

7. Manual mode

8. Holiday mode

9. Permanent shut-off

10. Clock setting mode

11. Current time

12. Current date (various parameters

in the CONST mode)

13. Status line, dynamically changing

according to the process running

14. Low battery indication

TIME CHANGE

YES

VERSION

DISPLAY DESCRIPTION

SUMMER/WINTER TIME CHANGE

VERSION (restoring the default settings)

By choosing YES with “ „ buttons you can activate

automatic SUMMER/WINTER time change according calendar.

You don´t need to take care about the time change, thermostat

make automatic setting for actual season.

Firmware version, informative parameter only. If you press the

“ “ button long (for about 3 s) together with “, the RESET

message appears shortly on the LCD and the thermostat returns

to the default settings!

OPERATING MODESPARAMETER SETTING

Language selection

Hysteresis

Relay test

Setting of actual time and date

Temporary change of required temperature.

In AUTO mode till next temperature change.

Setting of week programms P1, P2

AUTOMATIC MODE

MANUAL MODE

OFF MODE - thermostat is permanent switched

OFF. Antifreeze protection 3 °C is still active!

HOLIDAY Setting of required temperature

and point of holiday ending

Summer/winter time change

Firmware version; factory setting

Touch sound

2 ×

Clock

Setting

Programming

Constants

level 0

level 1 level 2

CONTROL MENU - PROGRAMING METHOD

HOLIDAY

LEAD FREE

gemäß RoHS

Mo-Fr

Sa-Su

ELEKTROBOCK CZ s.r.o.

Blanenská 1763

Kuřim 664 34

Tel.: +420 541 230 216

In case of guarantee or

post-guarantee service,

send the thermostat to

the manufacturer’s

address.

Technical parameters

Power supply 2 x 1.5 V alkal. batteries type AA

Number of temp. changes 6 temperature changes per day

Hysteresis 0,1 to 6°C

Minimum program. time 10 minutes

Adjustable temp. range +5°C to 39°C

Temperature setting in 0.5°C steps

Minimal indication step 0,1°C

Measurement accuracy ± 0,5°C

Battery life heating season

Protection IP20

Output max.5A (potential-free contacts)

Working temp. 0 to 40 °C

www.elbock.cz

Preset weekly program:

[°C]

[h]

ROOM THERMOSTAT PT23

Properties:

• preset weekly program

• powered by batteries 2 x 1,5 V / AA

• 6 temp. changes per day

• programming by 10 minutes and 0.5 °C

• programming “day-by-day” or Mon-Fri, Sat-Sun or Mon-Sun

• anti-freeze protection (3 °C)

• short-term change in the required temp.

• auto SUMMER/ WINTER time change

• big backlit display

• output (potential-free contact) max. 5 A / 250 V AC

• intuitive navigation in the selected language (CZ / SK / PL / EN / DE / RU)

• possibility of setting HYSTERESIS

• manual mode (MANU)

• permanent switch-off (OFF)

• HOLIDAY mode

• low battery indication

• light and sound indication of buttons

PT23 is a battery-powered room temperature. The big, well-arranged

graphic display offers intuitive navigation in the selected language (CZ/PL/EN/DE/RU/SK) .

The backlit display enables thermostat control even in dark. With preset program can PT23,

after installation, and set the current time, immediately used without further adjustment.

Table des matières

Autres manuels ELEKTROBOCK Thermostat

ELEKTROBOCK

ELEKTROBOCK PT14-P Manuel utilisateur

ELEKTROBOCK

ELEKTROBOCK TS10 Manuel utilisateur

ELEKTROBOCK

ELEKTROBOCK BT52 Manuel utilisateur

ELEKTROBOCK

ELEKTROBOCK PT52 Manuel utilisateur

ELEKTROBOCK

ELEKTROBOCK BT22 Manuel utilisateur

ELEKTROBOCK

ELEKTROBOCK BPT010 Manuel utilisateur

ELEKTROBOCK

ELEKTROBOCK BPT710 Manuel utilisateur

ELEKTROBOCK

ELEKTROBOCK PT32 Manuel utilisateur

ELEKTROBOCK

ELEKTROBOCK PT21 Manuel utilisateur

ELEKTROBOCK

ELEKTROBOCK BPT22 Manuel utilisateur

ELEKTROBOCK

ELEKTROBOCK TS20 Manuel utilisateur

ELEKTROBOCK

ELEKTROBOCK PT32 GST Manuel utilisateur

ELEKTROBOCK

ELEKTROBOCK BT012 Manuel utilisateur

ELEKTROBOCK

ELEKTROBOCK BT710 Manuel utilisateur

ELEKTROBOCK

ELEKTROBOCK BPT322 GST Manuel utilisateur

ELEKTROBOCK

ELEKTROBOCK BT725 Manuel utilisateur

ELEKTROBOCK

ELEKTROBOCK PT32 Manuel utilisateur

ELEKTROBOCK

ELEKTROBOCK PT02 Manuel utilisateur

ELEKTROBOCK

ELEKTROBOCK BPT102 Manuel utilisateur

ELEKTROBOCK

ELEKTROBOCK BPT37 Manuel utilisateur

Manuels Thermostat populaires d'autres marques

EWELLY

EWELLY EW-181 Manuel utilisateur

Prolon

Prolon T1100 Instructions d'installation

Computherm

Computherm Q20 Manuel utilisateur

Heatmiser

Heatmiser neoStat Manuel utilisateur

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur

Saswell

Saswell SAS920XWHB-7-S-RF Mode d’emploi

Aircalo

Aircalo TFP1-ET85P2 Manuel utilisateur

Honeywell

Honeywell CM721 Manuel utilisateur

Carrier

Carrier DEBONAIR 33CS Manuel utilisateur

Lennox

Lennox iHarmony Zone Thermostat Instructions de montage

Gemtech

Gemtech GT7000 Mode d’emploi

Rollei

Rollei Smartes 45000 Manuel utilisateur

Sinope

Sinope TH1300RF Manuel utilisateur

Honeywell

Honeywell RLV4305 Manuel utilisateur

Honeywell

Honeywell Prestige 2.0 THX9421 Manuel utilisateur

NuTone

NuTone NTBZ48 Instructions d'utilisation d'origine

Stelpro

Stelpro MAESTRO ASMT402AD Manuel utilisateur