Eleiko 3065208 Manuel utilisateur
ELEIKO PRESTERA
SQUAT RACK - STAINLESS
Art.no. 3065208
Read before installation and use
Safety instructions
Warning labels
List of components
Assembly instructions
Tools needed
User guide
Purpose
General instructions for use
Product specifications
Care and maintenance
Preventive maintenance and inspections
Spare parts and service
Warranty
3
3
6
7
8
8
16
16
16
16
17
17
17
17
CONTENTS
Install and use this equipment in a place where access and supervision are specifically controlled by the owner.
Be sure to install the equipment on a stable base and level the equipment properly. Eleiko recommends that all
equipment is installed by a licensed contractor or an Eleiko installer.
This equipment is intended for indoor use only.
SAFETY INSTRUCTIONS
It is the responsibility of the purchaser of ELEIKO products to instruct all users and supervising personnel on
proper usage of the equipment.
All included warnings (labels) and instructions
MUST
be read before the use of any Eleiko
1.
equipment. Only use the equipment as it is intended.
A user
MUST
get a medical examination and proper instructions before using any Eleiko
2.
equipment.
DO NOT
let anyone, under any circumstances, use equipment that appears to be damaged. Do not
3.
try to repair any equipment before consulting an Eleiko technician.
DO NOT
replace components of Eleiko equipment with other, none Eleiko, equipment (magnetic
4.
safety pin, frames, bars etc.). Do not improvise! If there are any doubts, consult an Eleiko
representative prior to any intervention.
DO NOT
overload the equipment and
DO NOT
try to exceed personal strength levels.
5.
Children under the age of 14 must be supervised by an adult.
6.
DO NOT
remove any safety labels from the Eleiko equipment. Eleiko is not responsible if a label is
7.
removed. Replace damaged labels immediately.
Eleiko packaging for products an be made of wood. Be aware of splinters! You
MUST
use
8.
protective gloves and proper work wear.
Eleiko packaging material could be a risk when handling. Be aware of crushing! You
MUST
use
9.
work wear including protective gloves and hard shoes.
Eleiko products and packing material are heavy, You
MUST
use proper lifting techniques, work
10.
wear and hard shoes.
- 3 -
READ BEFORE
INSTALLATION AND USE
- 4 -
THIS PRODUCT IS A PART OF ELEIKO
POWERLIFTING TRAINING STATION
Art.no. 3065160
ELEIKO PRESTERA SQUAT RACK - STAINLESS
ELEIKO POWERLIFTING TRAINING PLATFORM - 3x2m
ELEIKO PRESTERA SPOTTER ATTACHMENT
ELEIKO FLAT BENCH
ELEIKO PRESTERA MAGNETIC PIN SAFETY ARMS ELEIKO PRESTERA J-CUPS WITH ROLLERS
IF YOU HAVE PURCHASED THE ENTIRE
POWERLIFTING TRAINING STATION,
ASSEMBLE THE PRODUCTS IN THE
FOLLOWING ORDER:
1 2
3 4
5 6
- 5 -
- 6 -
WARNING LABELS
2001477
2x
1x
2001478
2x
2001373
2x
2001522
2x
2001379
6x
2001421
2x
M16x100
2001385-L110
2x
2001475
2x
M16x100
2001385-L100
- 7 -
6x
Art.no
DIN Pro bold 18
DIN Pro 11
Screw kit 2001382
LIST OF COMPONENTS
1,5 1,5
1,5 0,6
WRENCH
24 mm
SOCKET WRENCH
24 mm
- 8 -
Before assembly, make sure you have enough
clearance on all sides of the equipment, not less
than 0,6 meters. Take in account the accessibility
to remove and replace bar and weights.
TOOLS NEEDED
You need the following tools to assemble the equipment.
NOTE:
Do not use electric power tools for assembly.
ASSEMBLY INSTRUCTIONS
- 9 -
This product needs to be bolted to ground. See last page of assembly instructions.
Make sure to use right fasteners, depending on floor type.
BOLT TO GROUND
PREPARATION
- 10 -
Table des matières
Autres manuels Eleiko Support et étagère
Manuels Support et étagère populaires d'autres marques
Salamander
Salamander Acadia AC/W/L400/WH Manuel utilisateur
Fohhn
Fohhn VAT-09 Guide de l'utilisateur
ricoo
ricoo FS0522 Manuel utilisateur
AMSOIL
AMSOIL BMK-22 Guide rapide
Kargo Master
Kargo Master 48220 Manuel utilisateur
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur
