Elefine EF-DM601 Manuel utilisateur

EF-DM601 Intelligent

Thermal Imaging

Thermometer

Operation

Manual (V1.5)

2020-12

Statement:

1.The company reserves the right to modify any information in this document at any time.

This manual will be updated from time to time, updated content will be added in the new

version of the manual without notice.

2. This manual may contain technical inaccuracies or typographical errors.

3. The product is subject to the real object, and this document is only for reference.

4. If the operation is not in accordance with the guidance of this document, the user shall

bear the losses caused.

Safety Precautions:

1)When installing the equipment, please have qualified service personnel or system

installation personnel to operate.

2)Install the equipment in the environment with lightning protection measures.

3)Please do not touch the lens; prevent it from being damaged or dirty.

4)Please pay attention to prevent the lens from being worn, scratched or even torn.

5)Because uncooled infrared thermal imager uses very sensitive thermal sensors,

therefore, under no circumstances (power on or off), the lens shall be directly aimed at the

strong radiation source (such as the sun, direct laser beam or reflection, etc.), Otherwise,

it will cause permanent damage to uncooled infrared thermal imager

6)This product is a sophisticated electronic instrument, so please handle it carefully during

use, storage and transportation, prevent the equipment from being collided by external

force or falling from high place.

7)During transportation and storage, the ambient temperature shall not be lower than -

25 ℃; the original packing box must be used during transportation.

8)Before turning on the device, make sure that the power supply is connected properly. If

the power supply is connected incorrectly, the device may be damaged.

9)Do not press any object on the power line, and do not place the equipment where the

power line is easy touched.

10)If the equipment runs abnormally, please contact the supplier, do not dismantle the

equipment by yourself.

Version

Modification

Date

Modification

V1.3

2020.06.02

Revision

V1.4

2020.09.07

Revision

V1.5

2020.12.15

Revision2.9

Catalog

1.Outline.................................................................................................................................... 5

1.1Characteristics................................................................................................................ 6

1.2Composition.....................................................................................................................7

1.3 Monitor configuration requirements............................................................................7

2.Structure and Installation Instructions............................................................................... 7

2.1 Instrument Appearance................................................................................................ 7

2.2.Installation Notes........................................................................................................... 8

2.2.1 Shield Installation...................................................................................................... 8

2.2.2 Line connection.......................................................................................................... 8

1. HDMI interface: display device access (if the display does not have an HDMI

interface, you need to prepare HDMI to VGI or other adapter cables)................... 9

2. Network port: only needed for platform version......................................................9

3. Power interface: connect 5.5V DC power supply...................................................9

4. Audio interface: 3.5mm audio interface (optional HDMI and 3.5mm as sound

output)................................................................................................................................9

5. USB interface: connect peripherals.......................................................................... 9

2.3.Fixed Installation............................................................................................................9

3.Equipment Operating Instructions......................................................................................9

3.1 Running Back-End Software....................................................................................... 9

3.2 Front-end Software Interface.....................................................................................10

3.3 Face bias calibration (factory setting completed).................................................. 10

3.4 Black body position setting(Factory setting completed)........................................12

3.5 Black body parameter setting (factory setting completed)................................... 12

3.6 Alarm parameter setting.............................................................................................13

3.7 .........................................................14

3.8 Refresh time setting....................................................................................................14

3.9 Audio output settings.................................................................................................. 15

3.10 Platform connection settings (please contact technical staff if necessary)..... 16

3.11 Infrared imagery setting........................................................................................... 16

3.12 Mode selection setting............................................................................................. 17

3.13 Face detection display setting................................................................................ 18

3.14 Prompt sound setting............................................................................................... 18

3.15 Temperature display setting....................................................................................19

3.16 Population statistics setting.....................................................................................19

3.17 System language seting.......................................................................................... 20

3.18 System version Description.....................................................................................20

3.19 system firmware upgrade........................................................................................ 21

4.Photos of normal and high temperature personnel.......................................................22

5.Set the fixed IP address of the camera...........................................................................22

6.Precautions for use............................................................................................................ 23

1.Outline

EF-DM601 series product is a set of "Intelligent Thermal Imaging Thermometer" carefully

developed by our company. according to years of research and development experience

and customers' actual needs and market requirements. It can quickly check and alarm

people with fever symptoms in the crowd, accurately display the highest temperature

value. It can be combined with the face recognition system to determine the identity of

personnel, identify the listed personals and strangers, conducting fine management of

personnel and early warning and tracking of suspected fever.

1.1Characteristics

1.Non-contact full range human body temperature measurement: Uncooled full real-time,

high sensitivity thermal imaging, remote non-contact temperature measurement of human

body surface temperature.

2.High frame rate of temperature measurement: Frame rate up to 15Hz, close to real-time

imaging through naked eye observation.

3.Temperature measurement accuracy: ± 0.5℃without blackbody, and ± 0.2℃with a

blackbody.

4.Temperature measurement range: The system temperature measurement range is

-20~50 ℃.

5.Multi target automatic measurement: the system provides real-time dynamic thermal

image, which can realize multi-target automatic measurement, fast and accurate.

6.Automatic correction: It’s an intelligent temperature measurement system, which can

realize automatic correction of body surface temperature.

7.HD face collection: HD 2 million pixel network camera is used to collect HD face image.

8.Automatic face matching: Visible face photo and infrared face image automatic

matching, convenient for eye recognition and tracing.

9.Real time record: Real time record of passing personnel and body temperature, and do

automatic warning of suspected fever personnel.

10.Blackbody correction: The high configuration version can be configured with a

blackbody, can do high-precision correction automatically, completely eliminating

temperature drift. The equipment can work stably and reliably for a long time despite

interference from ambient temperature etc.

11.Face retrieval: It(The equipment) can be connected to the superior platform to realize

face retrieval from face database and capture database, get the moving track of persons,

especially the activity track of suspected fever persons, and locate quickly

12.Statistical analysis: It can be connected to the superior platform to get global control of

the data of passers-by, traffic and personnel with abnormal temperature, as well as do

macro analysis and display.

13.Deep learning face recognition algorithm: It can be deployed with independent

intellectual property rights dynamic face recognition algorithm to achieve dynamic,

high-speed, multi face detection, capture and recognition, and realize fine management of

personnels.

1.2 Composition

EF-DM601 Series Configuration List:

Accessory Name

Quantity

Unit

Remark

Facial Infrared Thermometry Engine

set

Front-end

acquisition

component

Infrared temperature

measurement module

set

Visible light module

set

Embedded motherboard

set

Black Body

set

Power Adapter

suite

Platform Server

set

Optional

1.3 Monitor configuration requirements

Demand configuration

2.Structure and Installation Instructions

2.1 Instrument Appearance

2.2.Installation Notes

2.2.1 Shield Installation

Step 1. Open the tripod packing box and take out the tripod and tripod accessories.

2.2.2 Line connection

1. HDMI interface: display device access (if the display does not

have an HDMI interface, you need to prepare HDMI to VGI or

other adapter cables).

2. Network port: only needed for platform version.

3. Power interface: connect 5.5V DC power supply.

4. Audio interface: 3.5mm audio interface (optional HDMI and

3.5mm as sound output).

5. USB interface: connect peripherals

2.3.Fixed Installation

Design and install the wiring according to the user's requirements, as shown in the figure:

3.Equipment Operating Instructions

3.1 Running Back-End Software

After booted, the system will automatically start and enter the client-side main interface.

3.2 Front-end Software Interface

The main interface is divided into temperature measurement areas and image display

areas:

1. Visible light real-time video display area

2. Real time video display area of infrared thermal imaging

3. Snapshot of normal temperature personnel

4. Over-temperature personnel capture area. When people passing by with temperature

exceeds the setting value, he (she) will be automatically captured and displayed, with

alarm sound.

3.3 Face bias calibration (factory setting completed)

Table des matières

Manuels Thermomètre populaires d'autres marques

Delton

Delton 981A Manuel utilisateur

Baker

Baker MM2P Manuel utilisateur

Tarmo

Tarmo 320281 Manuel utilisateur

Citizen

Citizen CTD 504 Manuel utilisateur

TFA

TFA 14.1500 Manuel utilisateur

Vive

Vive DMD1010 Manuel utilisateur

Gotemp

Gotemp THB4002 Manuel utilisateur

GREISINGER

GREISINGER G 1202 Manuel utilisateur

Amprobe

Amprobe TMD-53W Manuel utilisateur

Trotec

Trotec BP10 Manuel utilisateur

Radiance instruments

Radiance instruments RT616 Series Manuel utilisateur

Eurolec

Eurolec IR151 Manuel utilisateur

Scaneo

Scaneo TS42B Manuel utilisateur

Sper scientific

Sper scientific 800043 Manuel utilisateur

Microlife

Microlife NC 200 Mode d’emploi

Motorola

Motorola MBP69SN Guide de configuration

The MeatStick

The MeatStick The MeatStick Manuel utilisateur

Hama

Hama TH35-A Manuel utilisateur