Electrorad ThermaStoreHHR Manuel utilisateur

ACU006113V01

HIGH HEAT RETENTION STORAGE HEATER

INSTALLATION MANUAL AND INSTRUCTIONS FOR USE

Smart charging

WiFi control

TFT display

Manual de instalación e instrucciones de uso

A. PRESENTATION

First of all, thank you for purchasing our products. Before proceeding with its installation, please

read all the instructions and recommendations detailed in this instruction manual, as the manufac-

turer will not be responsible for any breakdown or damage caused by non-compliance. Once the

storage heater is installed, keep this manual in a safe place so that it can be consulted at any time.

B. RECYCLING

Warnings for the correct disposal of the product according to the European Directive 2012/19 / EU.

At the end of its useful life, the product must not be disposed of together with municipal waste. It can

be delivered to specic di󰀨erentiated collection centers arranged by the municipal adminis-

trations or to distributors that provide this service. Disposing of an electrical appliance se-

parately means avoiding possible negative consequences for the environment and health

derived from improper disposal and allows recycling of the materials that compose it, thus

obtaining signicant savings in energy and resources. To underline the obligation to collaborate with a

separate collection, the product is marked with a warning not to use traditional containers for disposal.

For more information, contact your local authority or the store where you purchased it for disposal.

C. IMPORTANT SAFETY NOTES

The placement of the heating appliance must be chosen correctly and must

be carried out according the rules.

The equipment must be kept away from all ammable objects .

Children must not be left near the heater without being supervised.

Children under 3 years of age should be kept out of the reach of the applian-

ce unless they are continuously supervised.

Children from 3 years old and under 8 years old should only turn the applian-

ce on / o󰀨 provided that it has been placed and installed in its intended nor-

mal operating position and that they are supervised or have received ins-

tructions regarding the use of the appliance in a safe and secure manner.

Children from 3 years old and under 8 years old should not plug in, regulate

and clean or carry out maintenance operations.

This appliance can be used by children 8 years of age and older and by

persons with reduced physical, sensory or mental capabilities, if they have

been given appropriate supervision or training regarding the safe use of the

appliance and understand the dangers involved.

Children should be supervised to ensure that they do not play with the

appliance.

Manual de instalación e instrucciones de uso

Cleaning and maintenance to be carried out by the user should not be ca-

rried out by children without supervision.

Caution: some parts of this product can become very hot and cause

burns. Particular attention should be paid when children and vulnera-

ble people are present.

In no case should the equipment be covered by clothing, a container or any

other object, nor should it be placed under a closet or any other obstacle that

prevents the circulation of hot air.

WARNING:

To avoid overheating, DO NOT COVER the heater.

The heating appliance should not be placed immediately un-

der a socket outlet.

Avoid using extension cords as these can cause overheating and cause

a re hazard. However, in the case of using an extension cord, the cable

must have a section 1.5mm² / 16 AWG minimum size and that support a

power not less than 2600w in the case of powers up to 2600w, and section

2.5mm² / 14 AWG of minimum size and that supports a minimum power of

3400w for powers from 2600w.

This appliance is intended to be permanently connected. The power supply

circuit of the equipment must incorporate an omnipolar cut-o󰀨 switch with

a contact separation of at least 3 mm.

The connection cables of the heater itself must not come into contact with

the surface of the appliance, and in the event that they can come into con-

tact, they must be protected with an insulating cover that has an adequate

temperature level.

The equipment must not be installed in places where there is a risk of

splashing water, such as bathtubs, sinks, etc. The equipment must be ins-

talled in such a way that the switches, thermostat, power socket, cannot be

directly or indirectly touched by a person in the bathtub or shower (adhere

the prohibited distances according to REBT).

Manual de instalación e instrucciones de uso

If the power cable is damaged, it can only be replaced by an authorised

person, in order to avoid risks. If during the installation and assembly of the

appliance, a part of the thermal insulation or resistance shows damage or

deterioration that impairs the safety of the appliance, it must be replaced by

an identical part.

Before carrying out any operation inside the appliance, do not forget

to disconnect the power supply.

Contact with the core temperature probe can cause an electrical hazard. The

probe cannot be manipulated, moved or touched.

Never open the appliance while it is charged.

The presence in the environment of tobacco smoke or suspended parti-

cles, atmospheric pollution, etc., could darken the wall surfaces near the

storage heater

Always observe the safety measures when placing the heater on the wall.

The electrical installation must have a switch with fuses or magnetothermic

protection. Likewise, a di󰀨erential protection against ground faults is advi-

sable. The voltage and frequency values of the power supply must be the

same as those indicated on the nameplate.

It is possible that the radiator could create slight noises at the beginning of

its operation, it is something normal due to expansions and contractions.

As the days go by, this noise disappears.

After the appliance has been reinstalled in another location, it should be put

into operation for the rst charging period under the control of the installer.

Given the weight of the heater with the bricks, it must be taken into account

that both the wall and the supporting oor have su󰀩cient strength, in case

of doubt consult your technician. To maintain stability, it is essential that the

heater is located on a level surface and care must be taken to avoid une-

ven surfaces, such as those that can result from carpets or tiled surfaces

that partially bulge under the heater.

Manual de instalación e instrucciones de uso

D. INSTALLATION

BEFORE INSTALLATION

The installation and start-up of this appliance is very simple, however, you must read very carefully

all the instructions and recommendations that are detailed in this instruction manual, since

the manufacturer will not be responsible for damage caused by non-compliance.

Once the appliance has been unpacked, the packaging remains must be removed responsibly since

all the elements have been designed for recycling. If, once unpacked, you detect apparent damage

to the appliance, you should consult your supplier before proceeding with the installation and elec-

trical connection within a period of less than 24 hours.

Assembly and installation must be carried out following the instructions detailed in this manual.

The equipment does not need special maintenance. To clean, use a soft, dry cloth, only when the

battery is disconnected and cold. Do not use solvents or abrasive products..

VERY IMPORTANT!

• Read the installation manual before mounting the equipment.

• Read the user manual to handle the equipment.

• Observe the warnings carefully.

• Install the equipment in a place where air can circulate.

• It is advisable that it be assembled by qualied personnel.

ELECTRIC CONNECTION

• In the electrical connection of the appliance, an isolation method must be incorporated into the xed

installation in accordance with the installation regulations in force in the country where it is to be ins-

talled.

• For safety before proceeding with the connection, verify that there is no voltage in the network.

• Before connecting the appliance to the electrical network, make sure that the supply voltage is that

indicated on the 230V rating plate.

• The device must be connected to the protective conductor of the xed installation.

• Any incident derived from non-compliance with these instructions will invalidate the guarantee.

• When connecting, the electrical diagram must be strictly respected, with special attention to the co-

lors of the cables.

WARRANTY

The company o󰀨ers a technical guarantee according to current legislation in each country. For this

guarantee to be valid, you must present the original of the invoice, delivery note or purchase receipt.

• The warranty only covers manufacturing defects or any problems caused by such defects.

• All problems arising from installation or insu󰀩cient power (insu󰀩cient power to heat the room,

incorrect installation, etc.) are not covered by this warranty.

• This radiator is for home use, installation in any other environment is not guaranteed.

• The manufacturer reserves the right to decide whether to repair any defective part or replace all

equipment.

• All costs resulting from damage caused by improper use, transportation, improper power supply,

are not covered by this warranty.

• If the appliance is not installed or positioned as indicated in this manual, the responsible com-

pany will not be liable for possible damages caused by its misuse.

• Any tampering will invalidate the warranty.

• In the last case of resorting to the legislation, both parties will be under the jurisdiction of the

courts of the province of the manufacturer.

Manual de instalación e instrucciones de uso

ASSEMBLY INSTRUCTIONS

• For ease of handling, the DS brick and kit are supplied separately.

• The support bases are inside the core of the accumulator.

• The installation of this appliance must be carried out by an authorized installer in accordance

with the o󰀩cial regulations in force in each country.

• It is forbidden to place the appliance in places where explosive gases are emitted or with the

presence of ammable products.

• Keep a minimum distance from combustible materials, especially doors, furniture, curtains, clo-

thing, etc. at least 30cm from the front and sides and at least 10cm from the wall (non-combus-

tible).

• Remove the lower screws and remove the front panel by pushing it upwards carefully.

• Once the front panel is removed, the heater core will be visible. When you remove the core cover,

you will nd the support bases and the wall mounting kit.

• Begin by placing the support system. This is done without the need for screws, by inserting the tabs

all the way into the corresponding slots ensuring that the fastening is well done.

• Remove the wall support piece from the equipment (it is pre-assembled with 2 screws at the

back) and present it in its nal location at the height dened in the graphic. With a pencil mark

through the holes provided these points will help us to x the device to the wall.

Manual de instalación e instrucciones de uso

• Before xing it to the wall, we must pass the hoses through the most suitable hole.

• Remove the anchor and proceed to make the holes to x the heater to the wall. Once done,

place the support on the wall.

• Position the equipment and screw the wall support piece back to the equipment.

CHARGING THE STORAGE HEATER BLOCKS

• With the appliance already in place and attached to the wall, remove the core cover with extreme

care so as not to damage the insulation or the heating elements.

• Place the blocks inside the core according to the following distribution:

1650 2550 3400

647mm

Manual de instalación e instrucciones de uso

• Tilt the resistors forward to facilitate the placement of the blocks with the smooth side on the back.

Once the placement of the blocks is nished, return the heating elements to their vertical position.

• Then place the blocks in front, with the smooth side forward and the notched side toward the resis-

tor, until the entire gap is completed and install the third row of blocks with the smooth side forward.

• Remove the protective plastics from the upper tray and place it on the bricks with the gap facing

down without preventing air from owing and reinstall the front panel of the core.

ELECTRIC CONNECTION

The electrical installation must always be carried out by an authorized installer according to the current

regulations of the supplying Electric Company. To carry out any repair or revision of the appliance,

disconnect it electrically from the mains before opening it.

For its connection, the device has a terminal strip in the lower right area.

Once the assembly is nished and before repositioning the extracted parts, we must carry out the

following checks:

• Check the level of electrical insulation between power terminals and ground. The insulation resistan-

ce must be 0.2 MOhm, under a minimum voltage of 500 V.

• Measure the value of the resistances and the continuity of the circuits.

• With the device connected, measure the consumption, voltage and intensity according to the values

indicated in the table of technical characteristics included in this manual.

ELECTRIC SCHEME

Manual de instalación e instrucciones de uso

E. TECHNICAL CHARACTERISTICS

Accumulation power

(W)

Nominal Charger

7h (kWh)

Emission power

(W) Bricks Measures

(mm)

Weight

(Kg)

1650 11,55 625 12 715x743x180 93,5

2550 17,85 950 18 925x743x180 130,0

3400 23,80 1275 24 1035x743x180 170,0

Temperature accuracy +/- 0,1ºC

Temperature setting range

- Comfort

- Economic

- timer

- Anti ice

5 ° C to 30 ° C step every 0.5 ° C

Supply voltage 230 Vac +/- 10% 50Hz

F. USE OF THE STORAGE HEATER

ICONS FROM THE SCREEN

Increase the temperature.

Navigate up.

Reduce the temperature.

Navigate down.

On/O󰀨/Mode

Back.

Advanced Settings (5sg).

View current temperature/setpoint temperature.

Manual de instalación e instrucciones de uso

Operating modes

The equipment is started / turned o󰀨 pressing the ON/MODE button and has 3 modes of operation;

OFF mode

In OFF mode, the device is practically o󰀨, does not charge and does not heat up.

12:35

OF F

Easy Mode (Fixed Temperature)

In this mode, the device is set to a xed temperature setting (18ºC).

Weekly programming mode

In this mode, the device follows a temperature program. It consists of 3 temperature values (anti-

frost, eco, comfort) that can be adjusted every hour or every half hour.

After starting the device, a start screen appears, which can be the Weekly Programming or the Easy

Programming screen, only one of the two modes can be active.

You can choose which mode to use in the advanced settings, for this;

• Press the CONF button for approximately 5 seconds.

• With the +/- buttons scroll through the di󰀨erent options to “ADVANCED” and press ON / MODE.

• Then press ON / MODE again in “FUNC MODE”, once inside you can select (again with the

+/- buttons) between “FIXED TEMPERAT” (easy mode) or “WEEKLY PROGRAM”. Press ON/

MODE to conrm and press the CONF button to exit (press this button as many times as we want

to go backwards).

Set point temperature

Table des matières

Autres manuels Electrorad Chauffage

Electrorad

Electrorad DigiLine Series Manuel utilisateur

Electrorad

Electrorad Digi-Line Guide d'installation et d'utilisation

Electrorad

Electrorad Vanguard Manuel utilisateur

Electrorad

Electrorad Aeroflow Series Manuel utilisateur

Electrorad

Electrorad HPH01-05E Manuel utilisateur

Manuels Chauffage populaires d'autres marques

oventrop

oventrop Regucor Series Manuel utilisateur

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manuel utilisateur

ELMEKO

ELMEKO ML 150 Manuel utilisateur

BN Thermic

BN Thermic 830T Manuel utilisateur

KING

KING K Series Mode d’emploi

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guide de démarrage rapide

Well Straler

Well Straler RC-16B Manuel utilisateur

EUROM

EUROM 333299 Manuel utilisateur

Heylo

Heylo K 170 Manuel utilisateur

Eterna

Eterna TR70W Manuel utilisateur

Clarke

Clarke GRH15 Mode d’emploi

IRSAP

IRSAP The Radiator Company Ovali Manuel utilisateur

Empire Heating Systems

Empire Heating Systems WCC65 Manuel utilisateur

Wetekom

Wetekom 92 86 43 Manuel utilisateur

Desa

Desa SPC170-F Manuel utilisateur

Watlow

Watlow Watrod Electric Tubular Heaters Manuel utilisateur

Haverland

Haverland ECO-DRY GPS Series Manuel de la liste des pièces

Stelpro

Stelpro ASILVC2060 Series Manuel utilisateur