Independent control –Timed settings
First of all, set your date, time, comfort and set back temperatures following the steps for manual control on the previous page. It helps if you have an
idea before you start of when you want your radiator to be on comfort and when you want it to be on set back for a full weekly cycle.
1.) Using the arrow right button, move along the icons to the clock symbol and press OK.
2.) Using the arrow down key, scroll until you reach U1 then press and hold the OK button for 3 seconds. You will now see the following screen:
You will notice that number one is highlighted. As mentioned earlier we treat
day 1 as Monday, so you are about to set Monday in your weekly cycle.
You will also notice that the moon is present, this means that you are setting
the setback temperature first as most people require this at midnight and we
start setting the timings from 12am.
3.) Now if you press the arrow up button, you will notice that the time changes in 30 minute intervals each time you press it. Keep pressing the arrow
up button until you get to the time you want the temperature to change to comfort. e.g. 7am
4.) Now you are at the time you want the radiator to come on to comfort setting, press OK and you will see the moon icon disappear and the sunshine
icon will now be show instead. Press the arrow up key again until you reach the time that you want the radiator to drop back to the set back
temperature.
5.) Now press OK again and you will notice the sunshine disappear and the moon will come back. Repeat steps 4 and 5 until you reach 23:30
6.) You have now completed the temperature settings for Monday. You will notice that bars along the timeline at the bottom of the screen indicate
when comfort mode has been selected. When you press the arrow up button again, the words ‘copy will appear on the screen, this is asking you if you
want to copy the exact same timings for the next day which would be Tuesday. If you want to do this then press OK.
7.) If you want a different set of timings for the next day, press the arrow up key for no, then you can start again for this day starting from step 4.
8.) Once you reach 23:30 on day 7, the next time you press OK you will be asked if you want to save the full week’s cycle. Press OK and then this full
week will be saved to the U1 pre-set.
The radiator will now automatically put you into U1 setting and in theory, you should never have to touch the radiator again.
5
