Electromatic Equipment Co., Inc.
-2-
1.0 INTRODUCTION
1. Place the empt provided cup (0.5 litre) on the scale
and turn the scale on. It shows 0.0 gram.
2. Fill up the cup with the sample material (+/- 1.0g). The
fill quantit is shown on the upper left corner on the
displa of the humimeter FS2.
3. Make sure that the measuring chamber is completel
empt . It is important that no material is left in the
measuring chamber when ou turn on the device.
4. Switch on the humimeter FS2 b pressing the power
button ( ) for 3 sec.
5. As the next step, please do the self calibration. The
word “calibrate” will show up on our displa . Accept
b pressing the button.
6. In case a menu point is shown, press the left button
( ) until ou reach the measuring window.
7. Select the right calibration curve for our material
under test using the buttons or .
Electromatic Equipment Co., Inc.
-11-
9.0 WARRANTY
Electromatic Equipment Co., Inc. (Electromatic) warrants to the original purchaser
that this product is of merchantable qualit and confirms in kind and qualit with the
descriptions and specifications thereof. Product failure or malfunction arising out of
an defect in workmanship or material in the product existing at the time of deliver
thereof which manifests itself within one ear from the sale of such product, shall be
remedied b repair or replacement of such product, at Electromatic’s option, except
where unauthorized repair, disassembl , tampering, abuse or misapplication has
taken place, as determined b Electromatic. All returns for warrant or non-warrant
repairs and/or replacement must be authorized b Electromatic, in advance, with all
repacking and shipping expenses to the address below to be borne b the
purchaser.
THE FOREGOING WARRANTY’S IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE
WARRANTY OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR
PURPOSE OR APPLICATION. ELECTROMATIC SHALL NOT BE RESPONSIBLE
NOR LIABLE FOR ANY CONSEQUENTIAL DAMAGE, OF ANY KIND OR
NATURE, RESULTING FROM THE USE OF SUPPLIED EQUIPMENT, WHETHER
SUCH DAMAGE OCCURS OR IS DISCOVERED BEFORE, UPON OR AFTER
REPLACEMENT OR REPAIR, AND WHETHER OR NOT SUCH DAMAGE IS
CAUSED BY MANUFACTURER’S OR SUPPLIER’S NEGLIGENCE WITHIN ONE
YEAR FROM INVOICE DATE.
Some State jurisdictions or States do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation ma not appl to ou.
The duration of an implied warrant , including, without limitation, fitness for an
particular purpose and merchantabilit with respect to this product, is limited to the
duration of the foregoing warrant . Some states do not allow limitations on how long
an implied warrant lasts but, not withstanding, this warrant , in the absence of such
limitations, shall extend for one ear from the date of invoice.
Electromatic Equipment Co., Inc.
600 Oakland Ave. Cedarhurst, NY 11516 - USA
Tel: 1-800-645-7330 / Tel: 516-295-4300 / Fax: 516-295-4399
Ever precaution has been taken in the preparation of this manual. Electromatic assumes no
responsibilit for errors or omissions. Neither is an liabilit assumed for damages resulting
from the use of information contained herein. An brand or product names mentioned herein
are used for identification purposes onl , and are trademarks or registered trademarks of their
respective holders.
