Electrolux Wascator TT200 Fiche technique

Operating and installation manual

Tumble dryer TT200 / TT270

Gas

(RMC) 487 14 49 71

English speaking countries outside EU

Tumble Dryer, drum volume 200/270 litres GAS

Contents:

Instructions for use:

General aspects ........................................................................................ 1

Explanation................................................................................................. 2

Operation, manual residual moisture control.............................................. 3

Maintenance............................................................................................... 4

Installation:

Position....................................................................................................... 5

Dimension sketch gas heating.................................................................... 6

Power connection....................................................................................... 7

Installation gas 12 kW ................................................................................ 8-11

Technical Data............................................................................................ 12

Left/right hinged door.................................................................................. 13

Evacuation system ..................................................................................... 14

Examples of evacuation systems............................................................... 15

Checking the functions............................................................................... 16

PCB (printed circuit board), setting............................................................. 17

Quick-view parameter listing. ..................................................................... 18

Parameter programming, residual moisture control ................................... 19

Parameter programming, changing parameters......................................... 20-21

Error codes................................................................................................. 22

Remember that such textiles as silk and wool

are not to be dried in the tumbler.

The manufacturer reserves the right to alter design and material specifications

487 14 49-21/97.20

Safety Instructions

This machine is intended for drying water-washed garments

alone.

The machine is not to be used for drying foam rubber or

materials similar to rubber.

The machine is not be used by minors.

The machine is not to be washed down with water.

Mechanical and electrical installation work are only to be

performed by authorized personnel.

In the case of machine fault, this is to be reported to the person

in charge as soon as possible. This is important for your own

safety and for the safety of other users.

The machine must not be installed in rooms with dry-cleaning

machines using PERCHLOROETHYLENE.

General Aspects 1

Drying is effected as follows:

• The tumbling drum (1) rotates at constant speed in

order to keep the garments in movement all the

time.

• An inbuilt fan (2) carries fresh air through

the machine.

• The air first passes the heating unit (3), where it is

heated.

• The air is then sucked into the drum via the

perforation at the back wall. It absorbs the

humidity in the garments and leaves the drum via

the perforation at the front of the drum.

• Next the air passes a filter (4) which collects lint

and dust. The air is conducted out of the room via

the fan and the vent pipe system.

Manual residual moisture control

A. Program selector

B. Temperature symbols

C. Lamp is lit for selected program

D. Start button

E. Lamp flashes / ready to start

F. Drying / lamp is lit

G. Cooling / lamp is lit

H. Drying time completed / lamp is lit

I. Filter / lamp is lit: Clean filter

J. Display indicates drying time

when time controlled is selected.

K. Timer buttons for desired drying time,

one press = one minut

L. Select residual moisture program by

pressing one of the following buttons:

1. Extra dry

2. Storage dry

3. Iron dry for iron

4. Iron dry for ironing machine

C B A

K K

Instructions for Use

Explanation

Instructions for Use 3

Manual operation with residual moisture control

Open filter door.

Clean filter.

Close filter door ➡.

In order to prevent

garments from

creasing:

Empty tumbler

immediately. ➡.

Open filling door.

Fill garments into

drum.

Close door ➡.

Stop:

The tumbler can

always be stopped

by opening the

door.

Re-start:

Close door and

press start button.

The tumbler stops

automatically:

Time controlling:

- when the drying

time has expired

Residual moisture:

- When the selected

has been obtained.

Start:

Press start button.

Anti-crease

program ➡.After the drying

time has ended,

the drum rotates at

short intervals until

door is opened.

Max. 1 hour.

Airing.

without heat.

Mild wash.

Low heat.

PP / normal wash.

Normal heat.

Time control

one press

= one minut

Residual moisture

Extra dryt

Storage dry

Iron dry (iron)

Iron dry (machine)

Select drying

program.

Press program

button. Lamp is lit

for selected program

➡.

Select

either

Time controlled

Residual moisture

Drying program: Drying time: Residual moisture:

Set timer to:

Automatic program

Airing without heat c. 10 min. with the following options:

Mild wash, low heat c. 25 min.

Extra dry

PP / normal wash, normal heat c. 25 min.

Storage dry

Iron dry (for iron)

Iron dry (for machine)

Maintenance

The following work should be carried out at

regular intervals at a rate depending on the

frequency of use.

Daily

• Check that the drum stops when the door is

opened.

• Check that the lint screen has been cleaned.

The lint screen is to not be removed for

cleaning; just clean it with a soft brush or

your hand.

• Check that the lint screen is unbroken.

• Check that the machine will not start until

the start button has been activated.

• Check that the door glass is unbroken.

Every quarter / half year

• Check that the fresh-air intake at the back of

the tumbler is not clogged by lint or in any

other way.

• Check that the vent system is tight and not

clogged by lint/dust or in any other way.

• On machines with residual moisture auto-

matic, the lifters in the drum should be

cleaned with a sponge at least once every

three months.

Annually

• Check that the fresh-air intake to the room

and the vent ducts/pipes in and from the

room are not clogged by lint/dust or in any

other way.

Clean as required - depending on the

frequency of use. Minimum once a year.

• At least once a year the inside parts of the

machine should be checked by a

competent, skilled person and cleaned for

lint.

Installation GAS 200/270 litres 5

Installation

Unpacking

Unpack the machine from its packaging.

There are no transport fittings.

Positioning

Place the tumble dryer in such a manner that the

work of both user and service technician

becomes as easy as possible. The door is

reversible (page 13).

Fig. The distance from the wall or other equipment

behind the machine should be at least 500 mm;

distance on the sides at least 10 mm. Please

note that for the purpose of servicing there

should be access to the back of the machine.

Mechanical installation

Fig. Adjust the machine to make it horisontal - and

stable on all four feet.

The max. height adjustment of the feet is 50 mm.

When adjustment has been completed, lock the

feet with the lock nuts.

Installation onboard ship

Fig. The 4 accompanying fittings can be used to

secure the machine.

Secure the fittings to the base with four M10 set

screws.

10 10

612 500

Installation GAS 200/270 litres

A792

Connection gas 1/2"

Drum volume

litres

200 827 mm 614 mm

12 kW

Heating

effect BC

Blow-off branch

∅ 160

270 982 mm 769 mm12 kW ∅ 200

1508

902

280

R612

422

817

48 (EL)

137,5

51,5 (EL)

Installation GAS 200/270 litres 7

Electrical installation

To be carried out by a skilled, competent person.

The tumble dryer requires its own fuse group.

Fig. For each tumbler, place a multi-pole fixed switch

in the fixed installation. Place it in such a way

that it is easily accessible but will not be mistaken

for the tumbler main switch.

The motor has an inbuilt thermo-fuse, which is

why motor protection is not required in the

installation.

Fig. Remove the top cover from the tumbler in order

to connect the cable. Set up the tumbler as a

fixed installation. See dimensions in the table

below.

Before remounting the top cover: Check the

direction of rotation. See function checks, page

16. If the drum rotates in the wrong direction,

switch 2 phases.

The tumble dryer must be provided with extra

protection in accordance with relevant

regulations.

3~:

3N~:

N1L1

1N~:

Drum Voltage Power Heating Connecting lead Fuse

volume input Dimension

200/270 l 200-240V 1N 50/60 Hz 1,0 kW Gas12 kW 3 ×1,5 mm210A

200/270 l 400-440V 3N/3 50/60 Hz 0,5 kW Gas12 kW 5/4 ×1,5 mm210A

200/270 l 200-230V 3 50/60 Hz 0,5 kW Gas12 kW 4 ×1,5 mm210A

Machines marked 230V or 400V (new European voltage as per IEC 38)

can be connected to 220V or 380V mains plugs without any problems.

Cable dimensioning table

Installation GAS 200/270 litres

Gas installation 12 kW

The installation must be performed by authorized

staff. Mount a manual shut-off valve prior to the

machine.

The gas pipe to the machine must be

dimensioned for a power output of 12 kW.

The machine is equipped with an allgas burner.

On delivery from the factory the machine is

adjusted to a nozzle pressure equivalent to the

calorific value indicated on the data sign.

Note! If you convert to another kind of gas a

corresponding sign enclosed must replace

the existing sign on the back of the machine.

Check that the nozzle pressure and the calorific

value correspond with the values indicated in the

table. If not, you must get in touch with the

supplyer.

Before connecting the machine the pipe must be

ventilated.

After connection all the connections must be

tested for leakage.

Test run 12 kW

Connect a pressure gauge to testsocket outlet

(1). (Page 11)

Select programme (Normal/perm.press)

Start the machine.

Check the nozzle pressure. See table page 11.

Any adjustment is carried out on the adjusting

screw (3) of the regulator under nipple (2).

Check that the gas flame burns steadily with

a bluish colour.

Having completed the test the machine is made

ready.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Electrolux Séchoir

Electrolux

Electrolux 300 Series Manuel utilisateur

Electrolux

Electrolux EDS854J3WB Manuel utilisateur

Electrolux

Electrolux EDE 425 M Guide rapide

Electrolux

Electrolux EIED55H IW Manuel utilisateur

Electrolux

Electrolux 137357000A Manuel utilisateur

Electrolux

Electrolux EIMGD60LT3 Manuel utilisateur

Electrolux

Electrolux EWED65HSS - 27" Electric Dryer Manuel utilisateur

Electrolux

Electrolux IQ-TOUCH EIGD55H IW Manuel utilisateur

Electrolux

Electrolux EDE 421 E Manuel utilisateur

Electrolux

Electrolux EW8H359S Manuel utilisateur

Electrolux

Electrolux GLEQ642AS Manuel utilisateur

Electrolux

Electrolux EDC 5368 Manuel utilisateur

Electrolux

Electrolux EFME617SIW Manuel utilisateur

Electrolux

Electrolux IQ-Touch EIMGD60LT Manuel utilisateur

Electrolux

Electrolux EDC2086GDW Manuel utilisateur

Electrolux

Electrolux T4130 Manuel utilisateur

Electrolux

Electrolux DC6-14 Manuel utilisateur

Electrolux

Electrolux FGR641FS2 Manuel utilisateur

Electrolux

Electrolux EDE 5130 Manuel utilisateur

Electrolux

Electrolux EDE56140W Manuel utilisateur

Electrolux

Electrolux EDC 3150 Manuel utilisateur

Electrolux

Electrolux Tumble dryer Manuel utilisateur

Electrolux

Electrolux W455H Manuel utilisateur

Electrolux

Electrolux EFMG617STT Manuel utilisateur

Manuels Séchoir populaires d'autres marques

Bosch

Bosch WTA79200GB Manuel utilisateur

Amana

Amana W10233410A Manuel utilisateur

Miele

Miele TWH 780 WP Manuel utilisateur

Asko

Asko T760 Manuel utilisateur

Alliance Laundry Systems

Alliance Laundry Systems 25 Series Manuel utilisateur

Bosch

Bosch Logixx 10 WTB76556GB Fiche technique

STIEBEL ELTRON

STIEBEL ELTRON Ultronic S Mode d’emploi

Beko

Beko DS8433RX1M Manuel utilisateur

Dawlance

Dawlance Spinner DS 6000 C Manuel utilisateur

AEG

AEG TR838P4OB Manuel utilisateur

Indesit

Indesit IDV 75 Manuel utilisateur

Infiniton

Infiniton SD-DG85C Manuel utilisateur

BOMANN

BOMANN WT 5019 Manuel utilisateur

Alliance Laundry Systems

Alliance Laundry Systems TMB795C Manuel utilisateur

Asko

Asko T793C Manuel utilisateur

Kenmore

Kenmore 8041 - 5.8 cu. Ft. Capacity Electric Dryer Manuel utilisateur

Frigidaire

Frigidaire CAQE7077KW0 Manuel du propriétaire

Bosch

Bosch WTX8HKM9SN Manuel utilisateur