5
Disclaimer: This user manual is for informational purposes only. The manufacturer reserves the right to modify its specifications without prior notice.
Restrictions
· Influences resulting from temperature
The elebia NEO lifting hook has been designed to be used in normal atmospheric conditions and in a
temperature range from -20 ºC to 60 ºC / -4 ºF to 140 ºF. The NEO lifting hook must not be used if these
conditions are not met.
· Influences from acids/alkalines and chemicals
The elebia NEO lifting hook must not be exposed to acids/alkalines or their vapours, as certain produc-
tion methods may release acids and/or vapours.
EN
7. DO NOT lift more than theWorking Load Limit indicated per NEO lifting hook and in the CE stamp.
8. DO NOT use the NEO lifting hook to lift, sustain or transport people.
9. DO NOT lift loads over people and ensure that people remain at a distance from the load.
10. DO NOT operate the NEO lifting hook unless all people are, and remain outside, the area of the
sustained load.
11. DO NOT operate the NEO lifting hook if there are people touching or manipulating it.
12. DO NOT lift loads unless the load slings, chain slings or other accessories are of the correct size and
suitably fastened to the NEO lifting hook.
13. DO NOT operate the NEO lifting hook with twisted, tangled, damaged or worn load slings, chain
slings or other means and/or lifting accessories.
14. DO NOT lift the load until the closure system of the NEO lifting hook is confirmed locked.
15. DO NOT operate the NEO lifting hook if it does not meet the lifting procedure specified in this user manual.
16. DO NOT leave the weight sustained on the NEO lifting hook unattended unless specific precautions
have been taken.
17. DO NOT allow the use of the NEO lifting hook to make electrical or earth contact in welding operations.
18. DO NOT allow the NEO lifting hook or lifting chains to be touched by a live welding electrode.
19. DO NOT withdraw nor cover the warning signs (i.e. LED Status Indicator, Laser Pointer) of the NEO
lifting hook.
20. DO NOT operate the NEO lifting hook if it lacks the safety signs or if they are illegible.
21. DO NOT modify the NEO lifting hook (by welding, grinding, etc.), as this can adversely affect its opera-
tion and safety.
22. Provide notification of any malfunction or abnormal performance of the NEO lifting hook after it has
been disconnected for its repair.
23. The NEO lifting hook must be stored clean and in a non-humid area to protect against corrosion.
24. DO NOT store the NEO lifting hook with the battery inserted.
25. The NEO lifting hook carries a laser pointer. Avoid exposure and do not stare into beam. Always be
aware of the beam location. Keep it away from people’s eyes and head. Watch out for reflected beams
from glass and shiny surfaces.
