5
Disclaimer: This user manual is for information only. The manufacturer reserves the right to modify any specifications.
Restrictions
· Influences resulting from temperature
The elebia NEO100 lifting hook has been designed to be used in normal atmospheric conditions and in a
temperature range from -20 ºC to 60 ºC / -4 ºF to 140 ºF. The NEO100 lifting hook must not be used if these
conditions are not met.
· Influences from acids/alkalines and chemicals
The elebia NEO100 lifting hook must not be exposed to acids/alkalines or their vapours, as certain pro-
duction methods may release acids and/or vapours.
EN
8. DO NOT use the NEO100 lifting hook to lift, sustain or transport people.
9. DO NOT lift loads over people and ensure that people remain at a distance from the load.
10. DO NOT operate the NEO100 lifting hook unless all people are, and remain outside, the area of the
sustained load.
11. DO NOT operate the NEO100 lifting hook if there are people touching or manipulating it.
12. DO NOT lift loads unless the load slings, chain slings or other accessories are of the correct size and
suitably fastened to the NEO100 lifting hook.
13. DO NOT operate the NEO100 lifting hook with twisted, tangled, damaged or worn load slings, chain
slings or other means and/or lifting accessories.
14. DO NOT lift the load until the closure system of the NEO100 lifting hook is confirmed locked.
15. DO NOT operate the NEO100 lifting hook if it does not meet the lifting procedure specified in section
11 of the user manual.
16. DO NOT leave the weight sustained on the NEO100 lifting hook unattended unless specific precau-
tions have been taken.
17. DO NOT allow the use of the NEO100 lifting hook to make electrical or earth contact in welding operations.
18. DO NOT allow the NEO100 lifting hook or lifting chains to be touched by a live welding electrode.
19. DO NOT withdraw nor cover the warning signs (i.e. LED Status Indicator, Laser Pointer) of the NEO100
lifting hook.
20. DO NOT operate the NEO100 lifting hook if it lacks the safety signs or if they are illegible.
21. DO NOT modify the NEO100 lifting hook (by welding, grinding, etc.), as this can adversely affect its
operation and safety.
22. Provide notification of any malfunction or abnormal performance of the NEO100 lifting hook after it
has been disconnected for its repair.
23. The NEO100 lifting hook must be stored clean and in a non-humid area to protect against corrosion.
24. DO NOT store the NEO100 lifting hook with the battery inserted.
25. The NEO100 lifting hook carries a laser pointer. Avoid exposure and do not stare into beam. Always be
aware of the beam location. Keep it away from people’s eyes and head.Watch out for reflected beams
from glass and shiny surfaces.
