Eldes ESIM110 Manuel utilisateur
QUICK START GUIDE
FOR ELDES ESIM110 USERS
1. Place SIM card in the holder.
Make sure that PIN code at SIM card is disabled*1.
2. Connect the circuit.
Connect control connectors of the gate automatics device |
to relay contacts and sensors to inputs Z1-Z3.
The system will start in less than a minute and LED indicator will start to blink every 5 seconds.
3. Set the English language by sending SMS message EN to the number of the SIM card inserted in ESIM110 device.
4. Change the default password to a new one.
Send following SMS message:
0000_PSW_XXXX
In place of XXXX you should enter your new 4 digital password.
All other messages for programming must start with this password.
Underscore symbol ‘_’ in this manual is used to represent space typing.
5. Upload up to five different user mobile numbers which will have access to control the system.
Send the SMS message with the following text*3:
XXXX_NR1:4411111111_NR2:4411111111_NR3:4411111111_NR4:4411111111_NR5:4411111111XXX
It is not necessarily to enter all 5 administrators at once – start by entering the first one (NR1) with your own
or preferred mobile number. The other ones can be added later (for NR2, NR3, NR4 or NR5 users).
6. Upload up to 500 users who will have access to control the gates.
Send SMS message with the following text*3:
XXXX_N:4411111111_4411111111_44...
It is not necessarily to enter all users at once. It is possible to add them at any time later with
same type of SMS message. Up to 10 numbers can be entered sending one SMS message.
7. The system is ready to use.*3
In this guide you will learn how to quickly set and run ESIM110 device manually
(using SMS messages for programming). Here are the most important steps:
*1 - PIN code can be disabled by putting SIM card into mobile phone and following proper menu. *2 - Supply Voltage: 10-24 V DC (200 mA max) or 10-24 V AC (200 mA). *3 - User must type
mobile number in the international format (it consist of only those digits that overseas callers must type: 44<area code><local number>) without symbol ‘+’. E.g. the mobile number of user is +44 (0)
113 xxx xxxx, so the correct format to type is 44113xxxxxxx and the wrong ones – 440113xxxxxxx or 0113xxxxxxx. *4 - device will use default settings set by manufacturer. The settings can be
changed by administrator at any time
ESIM 110
0000 PSW
1234
ESIM 110
EN
ESIM 110
1234 N:44
11111111
441111111
ESIM 110
1234 NR1:44
1111111 NR2
:441111111
ESIM 110
AC/DC
Power
supply
Gate controller
Opened gates
sensor
RELAY GND Z5 Z4 Z3 Z2 Z1
QUICK START GUIDE
FOR ELDES ESIM110 USERS
1. Place SIM card in the holder.
Make sure that PIN code at SIM card is disabled*1.
2. Connect the circuit.
Connect control connectors of the gate automatics device to relay contacts
and sensors to inputs Z1-Z3.
The system will start in less than a minute and LED indicator will start to blink every 5 seconds.
3. Connect device to the computer using USB cable.*2
4. Run program ELDES Configuration Tool.
Click button CONNECT via USB in the main window.
5. Change default password to a new one.
Select Users window and update Security section by typing a new password consisting of 4 digits.
6. Set the English language.
Select Users window and update Language section.
7. Set up to five different user phone numbers which will have access to control the system.
Select Users window and update Users section with preferred mobile numbers according to the rules*3.
8. Save the preferences. Click button Write Settings.
9. Upload up to 500 users who will have access to control the gates.
Select Phones Data Base window and update Tel Numbers section with preferred mobile numbers according to the rules*3.
To enter a new mobile number double click with mouse button on the area under ‘Tel Numbers’ sign or another mobile number.
10. The system is ready to use.*4
In this guide you will learn how to quickly set and run ELDES ESIM110 device
using ELDES Configuration Tool program. Here are the most important steps:
*1 - PIN code can be disabled by putting SIM card into mobile phone and following proper menu. *2 - Supply Voltage: 10-24 V DC (200 mA max) or 10-24 V AC (200 mA). *3 - If device is connected
to the remaining computer for the first time, computer will run instaliation of required drivers. Then user must wait then it ends and reconnect USB cable. *4 - User must type mobile number in
the international format (it consist of only those digits that overseas callers must type: 44<area code><local number>) without symbol ‘+’. E.g. the mobile number of user is +44 (0) 113 xxx xxxx,
so the correct format to type is 44113xxxxxxx and the wrong ones – 440113xxxxxxx or 0113xxxxxxx. *5 - device will use default settings set by manufacturer. The settings can be changed by
administrator at any time
ESIM 110
AC/DC
Power
supply
Gate controller
Opened gates
sensor
RELAY GND Z5 Z4 Z3 Z2 Z1
Autres manuels pour ESIM110
2
Table des matières
Autres manuels Eldes ouvre-porte
