Elation E Spot Led Manuel utilisateur

Rev.3/11/2010–visage Version1.0

E Spot Led™

Elation Professional

6122 S Eastern Ave

Los Angeles, Ca 90040

www.elationlighting.com

E SPOT LED™

©Elation Professional, Los Angeles Ca. 2 www.ElationLighting.com

E SPOT LED™

©Elation Professional, Los Angeles Ca. 3 www.ElationLighting.com

CONTENTS

1. General Information……………………………………………………………………… 4

a. Introduction………………………………………………………………………. 4

b. Unpacking………………………………………………………..…………..….. 4

c. Customer Support…………………………………………….………………… 4

d. Warranty Registration……………………………………………………..……. 5

2. Safety Instructions………………………………………………………........…………. 6

3. Features……………………………………………………………………………………7

4. General Guidelines………………………………………………………………………. 8

5. Fixture Overview…………………………………………………………………………. 9

6. Mounting and Installation………………………………………………………….……..12

a. Mounting Positions……………………………………………………………… 12

b. Mounting Points…………………………………………………………………. 13

c. Securing………………………………………………………………………….. 14

7. Understanding DMX……………………………………………………………………... 15

a. DMX Cable Requirements……..………………………………………………. 15

b. DMX Terminator………………………………………………………………….17

c. 3-Pin to 5-Pin Conversion……………………………………………………….17

8. Fixture Menu……………………………………………………………………………… 19

a. Menu functions………………………………………………………………….. 21

9. DMX Addressing..…………………………………………………………….. ………….29

10. DMX Channel Traits…...….…………………………………………………………….. 38

a. DMX Channel Values…………………………………………………………… 39

11. Error Codes………………………………………………………………………………. 41

12. Cleaning and Maintenance………………………………………………………………42

13. Photometric Data………………………………………………………………………….43

14. Gobos

15. Dimensional Drawings………………………………………………….……………….. 45

16. Circuit Schematic………...……………………………………………………………….46

17. Technical Specifications…………………………………………...………….………… 49

E SPOT LED™

©Elation Professional, Los Angeles Ca. 4 www.ElationLighting.com

1. GENERAL INFORMATION

INTRODUCTION: Congratulations, you have just purchased one of the most innovative and

reliable lighting fixtures on the market today! The E Spot Led,™has been designed to

perform reliably for years when the guidelines in this booklet are followed. Please read and

understand the instructions in this manual carefully and thoroughly before attempting to

operate this unit. These instructions contain important information regarding safety during

use and maintenance.

UNPACKING: Thank you for purchasing the E Spot Led™by Elation Professional®. Every E

Spot Led™has been thoroughly tested and has been shipped in perfect operating condition.

Carefully check the shipping carton for damage that may have occurred during shipping. If

the carton appears to be damaged, carefully inspect your unit for damage and be sure all

accessories necessary to operate the unit have arrived intact. In the event damage has been

found or parts are missing, please contact our customer support team for further assistance.

Please do not return this unit to your dealer without first contacting customer support at the

number listed below.

Inside the box you should find: the E Spot, a DMX cable, a safety cable, two omega clamps

and this manual. Please contact customer support at the number listed below if any items

are missing.

During initial fixture start-up, the fixture may omit some light smoke or release a

slight burning smell. This is a normal process and should decrease gradually.

CUSTOMER SUPPORT: Elation Professional®provides a customer support line, to provide

set up help and to answer any question should you encounter problems during your set up

or initial operation. You may also visit us on the web at www.elationlighting.com for any

comments or suggestions. For service related issue please contact Elation Professional®.

Service Hours are Monday through Friday 8:00 a.m. to 5:00 p.m. Pacific Standard Time.

Voice: (323) 582-3322

Fax: (323) 832-9142

E-mail: [email protected]

Forum: www.ElationLighting.com/forum

Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to

E SPOT LED™

©Elation Professional, Los Angeles Ca. 5 www.ElationLighting.com

rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs

yourself, doing so will void your manufactures warranty.

Please do not discard the shipping carton in the trash. Please save for return shipping in the

event service is ever needed or recycle the container whenever possible.

WARRANTY REGISTRATION: The E Spot Led™carries a two year (730 days) limited

warranty. Please fill out the enclosed warranty card to validate your purchase. All returned

service items whether under warranty or not, must be freight pre-paid and accompany a

return authorization (R.A.) number. The R.A. number must be clearly written on the outside

of the return package. A brief description of the problem as well as the R.A. number must

also be written down on a piece of paper and included in the shipping container. If the unit is

under warranty, you must provide a copy of your proof of purchase invoice. Items returned

without a R.A. number clearly marked on the outside of the package will be refused and

returned at customer’s expense. You may obtain a R.A. number by contacting customer

support at (323) 582-3322.

Epileptic Warning: Those suffering from epilepsy should avoid looking directly into the light

source at all times.

Never open this fixture while in use!

This device falls under protection-class 1. Therefore it is essential that the device be

grounded properly.

All electrical connections must be performed by qualified personal.

Be sure the available voltage matches the voltage requirements of the unit.

Be sure the power cord is never crimped or damaged. If the power cord is damaged, replace

it immediately with a new one of similar power rating.

Only handle the power cord by the plug. Never pull out the plug by tugging the wire portion of

the cord.

E SPOT LED™

©Elation Professional, Los Angeles Ca. 6 www.ElationLighting.com

2. SAFETY INSTRUCTIONS

The E Spot Led™is an extremely sophisticated piece of

electronic equipment. To guarantee a trouble free operation, it is

important to follow the guidelines in this manual. Elation will not

accept responsibility for damages resulting from the misuse of

this fixture due to the disregard of the information printed in this

manual.

1. Always be sure that the fan and the air inlets remain clean and are never blocked.

Allow about 6” (15cm) between this fixture and other devices or a wall to allow for

proper cooling.

2. Never touch the fixture during normal operation. This can cause severe personnel

injuries and/or damage to the fixture.

3. Be sure to unplug the E Spot Led™from the power outlet before performing any

service or cleaning related issues.

4. Never look directly into the light source. You risk injury to your retina, which may

induce blindness.

5. For safe operation, follow the Installation guide described in chapter two of this

manual. Operating the E Spot Led™without suited safety aids such as safety

cables or clamps can increase the risk of damage and/or personal injury.

6. When mounting this fixture, use only the original rigging parts included with this

fixture. Any structural modification will void the original manufactures warranty and

may increase the risk of damage and/or personal injury.

7. To reduce the risk of fire or shock, do not expose this fixture to rain or moisture.

8. Do not attempt to operate this fixture if the power cord has become damaged or

frayed.

9. Installation should only be performed by qualified and certified personal.

Important Notice: Damages resulting from the disregard of safety and general user

instructions found in this user manual are not subject to any warranty claims.

E SPOT LED™

©Elation Professional, Los Angeles Ca. 7 www.ElationLighting.com

3. FEATURES

•Pan 540° or 630˚ (User selectable) / Tilt 270°

•15˚ Beam Angle

•Low Power Consumption

•60 WATT White LED Source (Over 2,200 lumens from a single chip)

•60,000 hours rated LED life

•Color Wheel: 8 colors plus white, with rainbow effect

•Rotating gobo wheel with 7 rotating gobos plus open, all gobos can be easily

replaceable and gobo indexing

•Prism and Prism Rotation, with 16 prism macros (Indexable)

•Flicker-free operation for television and film

•3 operation mode: DMX controlled, stand alone or sound activated

•Strobe effect: 0~18 flashes per second or random strobe

•0%~100% Dimming (two dimming options; linear & standard)

•Electronic menu display

•Control board with full LCD character display and foil-keyboard

•RDMX (Remote DMX addressing from any DMX console)

•Auto test for all functions

•Automatic Pan/Tilt Correction

•USITT DMX-512 Complaint (3-pin and 5-pin DMX Connections)

•Value of each DMX-channel can be displayed

•Minimal heat emission

•Maintenance free operation

•Preprogrammed colored macros

•Electronic power supply (100v~240V 50/60Hz)

•8 built-in programs accessed via DMX-controller or manually

•Built-in DMX recorder - via the control board or external controller, up to 64 scenes

can be saved and then can be run in Stand Alone or sound activated.

E SPOT LED™

©Elation Professional, Los Angeles Ca. 8 www.ElationLighting.com

4. GENERAL GUIDELINES

This fixture is a professional lighting effect designed for use on stage, in nightclubs, in

theatres, etc. Do not attempt operation or installation without a proper knowledge on how to

do so.

This fixture was designed for indoor use only.

Consistent operational breaks may ensure that the fixture will function properly for many

years to come.

Do not shake the fixture around. Avoid brute force when installing or operating the device.

While choosing an installation location, please be sure that the fixture will not be exposed to

extreme heat, moisture or dust. The minimum distance between the fixture and a wall or flat

surface should be at least 0.5 meter (about 1.5ft).

Always install the fixture with an appropriate safety cable. When installing the fixture in a

suspended environment always be sure to use mounting hardware no less than M10 x 25

mm, also be sure the hardware is insert in the pre-arranged screw holes in the base of the

fixture.

When using the quick release “Omega” cam-lock system, be sure the four quick lock

fasteners are locked in the quick lock holes correctly.

Do not attempt to operate this fixture until you have familiarized yourself with its functions.

Do not permit operation by persons not qualified for operating this type of theatrical fixture;

most damages are the result of operations by nonprofessionals.

Please use the original packaging to transport the fixture in for service.

E SPOT LED™

©Elation Professional, Los Angeles Ca. 9 www.ElationLighting.com

5. FIXTURE OVERVIEW

1. LED Assembly

2. LCD Menu Display

3. Mode/Esc Button

4. Up Button

5. Down Button

6. Enter Button

7. Microphone

8. Carrying Handle

9. 3-Pin DMX Output

10. 3-Pin DMX Input

11. 5-Pin DMX Output

12. 5-Pin DMX Input

13. Power Switch

15. Fuse Holder

16. Power Cord

E SPOT LED™

©Elation Professional, Los Angeles Ca. 10 www.ElationLighting.com

1. LED–Extremely high optical LED output, Over 2,200 lumens from a sin-gle chip (White)

2. LED Menu Display - 4-segment menu display. Used to display the DMX address as

well as all other menu functions.

3. Mode/Esc Button - This button is used to access the menu functions.

4. Up Button – The up button is used to toggle forward through the menu functions and

settings.

5. Down Button – The down button is used to toggle backwards through the menu

functions and settings.

6. Enter Button – The enter button is used to enter in to a certain menu function or to lock

a function into memory.

7. Microphone – Internal microphone is used to trigger built-in scenes to sound.

8. Carrying Handle –Please use this intergraded handled to move the fixture form

location to location. Never carry the fixture by the head.

9. 3-Pin DMX Output Jack – This jack is used to send an incoming DMX signal to the next

fixture in the DMX chain via a female, 3-pin XLR jack.

10. 3-PIN DMX Input Jack – This jack accepts an incoming DMX signal via a male, 3-pin

XLR jack.

11. 5-Pin DMX Output Jack – This jack is used to send an incoming DMX signal to the next

fixture in the DMX chain via a female, 3-pin XLR jack.

12. 5-PIN DMX Input Jack – This jack accepts an incoming DMX signal via a male, 5-pin

XLR jack.

Autres manuels pour E Spot Led

Table des matières

Autres manuels Elation Équipement d'éclairage

Elation

Elation Opti Quad Par Manuel utilisateur

Elation

Elation PLATINUM BEAM 15R Manuel utilisateur

Elation

Elation ELAR EXTQW FLOOD HP Manuel utilisateur

Elation

Elation KL FRESNEL 6 CW Manuel utilisateur

Elation

Elation Elation Stage Setter 8 Manuel utilisateur

Elation

Elation EVENT PANEL SYSTEM Manuel utilisateur

Elation

Elation E-LOADER III Manuel utilisateur

Elation

Elation RGB Lamp Manuel utilisateur

Elation

Elation ARENA Q7 ZOOM Manuel utilisateur

Elation

Elation 6+ Series Manuel utilisateur

Elation

Elation COLOR SPOT 150 Manuel utilisateur

Elation

Elation Flower 5/90 Manuel utilisateur

Elation

Elation KL FRESNEL 8 FC Manuel utilisateur

Elation

Elation Design LED 60 Strip II WA Manuel utilisateur

Elation

Elation CMY Zoom 575 Manuel utilisateur

Elation

Elation COLOUR CHORUS 72 Manuel utilisateur

Elation

Elation Design Spot 300E Manuel utilisateur

Elation

Elation PROTEUS RAYZOR BLADES Manuel utilisateur

Elation

Elation ZCL 360i Manuel utilisateur

Elation

Elation PLATINUM SPOT 35 PRO Manuel utilisateur

Elation

Elation ELAR 162 TRI PAR Manuel utilisateur

Elation

Elation High Output LED Color Changer Opti RGB Manuel utilisateur

Elation

Elation ELED PAR RGB ZOOM Manuel utilisateur

Elation

Elation DMX Branch 419 Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur