INTRODUCTION
- 3 -
The LR500 air purier is a personal air purier for
professional use on construction and industrial sites.
The air purier is based on patented technology from
Clair International AB. Pat. no. 515895
Dimensions and technical data
Height 230 mm Rated voltage 1N~230V/50Hz
Width 490 mm Rated power 120 W
Depth 380 mm Noise level 43/57/63 dB(A)
Weight 9.7 kg Leak-tightness IP44
TECHNICAL DATA
SAFETY
Always disconnect the power plug before perform-
ing any service and maintenance, for example when
replacing the lter.
The power outlet that the air purier is connected to
should have an earth fault breaker of (max) 30mA
tted in front of it.
FUNCTION
The air purier is based on a quiet-running fan with
high pressure capacity. The fan creates a vacuum in
two lter cassettes. The space where the vacuum is
created is extremely leak-tight. The air is drawn in
through both the lter cassettes. A pre-lter should
always be installed in front of the lter cassette. This
prolongs the life of the lter cassette. The system of
drawing air through two lters makes the product
extremely versatile.
Spent lters should be disposed of with care.
The recycling methods for the lters vary according to
municipal regulations and the way in which the lter
was used. If in doubt, the lter should be treated as
hazardous waste. If used in an area where asbestos is
handled, the product may only be used by qualied
staff members.
In the standard version, the outlet side is tted with a
125 mm tube spacer so that it can be connected to a
ue pipe or tube. A spacer connection is available as
an accessory for the inlet sides. This system makes it
possible to mix air from two air sources, for example
oxygenised air from outdoors.