Eiki EK-620U Manuel utilisateur

Warping and Blending

Manual AP

Applicable models

EK-620U,621W,625U

EK-800U,810U,811W,815U,820U

Oct., 2019

Contents

Preparation

1. Connection - - - - - 3

2. Projector - - - - - - - 4

3. PC (Laptop) - - - - - 5,6

Operation

・How to connect - - -7,8

・Save / Open - - -- - -9

・General - - - - - - - - 10

・Warp - - - - - - - - - - 11,12

・Edge Blending - - - -13,14

・Black Level - - - - - - 15,16,17

Preparation

1. Connection

Connect an RJ45 cable to Ethernet port on the projector and

the PC (Laptop).

LAN Port 102

2-1. Projector

OSD menu : SETUP >Communications> LAN

DHCP : OFF (direct connection) / ON (Multi connections)

IP Address :

Subnet Mask :

Default Gateway :

2-2. Select the Apply→YES to confirm the settings, and then

wait until finished.

<NOTE>

When a DHCP server exists in the connected network, it assigns an IP address to

the projector and the computer automatically.

If DHCP server does not exists, set up IP Address, Subnet Mask and Default Gateway

manually.

DHCP : Please check with the network administrator.

Do not need to change.

3-1. PC (Laptop)

Start > Control Panel > Network and Internet

3-2. Right-click on Local Area Connection, and select 【Properties 】.

3-3. In the Properties window, select the Networking tab, and

select 【Internet Protocol Version 4 (TCP/IPv4 ) 】.

3-4. Select 【Properties 】.

3-5. Select and following the projector IP address.

Change the any numbers

from Projector’s LAN

information.

Same as

Projector’s LAN

information

Operation

This AP provides three major functions including

【Warp 】【 Edge Blending 】and 【Black Level 】.

・Old version AP needs to be removed before install the new one.

・This function makes user be able to operate a single projector.

Connecting Setting

1: Select 【File】→【New Multi-Function】.

2：Select Resolution

3：Input IP Address and press [Connect].

4：Connection is successful, icon will be changed from to

Delete Connecting projector

1：Select Icon

2：[Edit][Delete]

3：Disappear the selected Icon

Save / Open

Open

1: Select [File][Open]

2: Select directory and file.

3: Edit IP address and connect to the projector.

4: Click [Reconfigure]to load the settings.

Save

1: Select [File][Save]

2: Select directory and edit the file name.

<NOTE>

[Configure] button is not available after selected【Warp 】【 Edge Blending 】or

【Black Level 】tabs, need to start over “Open” again.

【General 】

Projector Output Resolution (Default: WUXGA)

・Select the native resolution of the projector.

Connect Setting (Default: 192.168.0.100)

・Connect to the shown IP address.

Function Settings

・Reset All:

Reset all settings to default value.

This function is not available after pressed the 【Warp 】【Edge Blending 】or

【Black Level 】.

・Reconfigure:

It can apply saved settings from AP to projector.

The button will enable after opening a saved file and connecting to the projector

by AP.

Autres manuels pour EK-620U

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Eiki Projecteur

Eiki

Eiki EK-110U Manuel utilisateur

Eiki

Eiki LC-XIP2600 Manuel d'installation et d'exploitation

Eiki

Eiki LC-7000U Guide de configuration

Eiki

Eiki LC-350 Guide de configuration

Eiki

Eiki LC-W5 Manuel utilisateur

Eiki

Eiki EIP-25 Manuel utilisateur

Eiki

Eiki LC-XGA982U Manuel utilisateur

Eiki

Eiki Digital projector Manuel utilisateur

Eiki

Eiki Brilliant LC-XNP4000 Manuel utilisateur

Eiki

Eiki EK-300U Manuel utilisateur

Eiki

Eiki LC-HDT10D Guide de configuration

Eiki

Eiki LC-XG100 Guide de configuration

Eiki

Eiki LC-XNB4M Manuel utilisateur

Eiki

Eiki LC-XGA970 Manuel utilisateur

Eiki

Eiki EK-812U Manuel utilisateur

Eiki

Eiki LC-XT6 Manuel d'installation

Eiki

Eiki LC-SD10 Manuel utilisateur

Eiki

Eiki EIP-3500 Manuel utilisateur

Eiki

Eiki LC-WB200 Manuel utilisateur

Eiki

Eiki EIP-HDT20 Manuel utilisateur

Eiki

Eiki LC-SM1 Manuel utilisateur

Eiki

Eiki LC-X985 Instructions d'installation et d'utilisation

Eiki

Eiki LC-XNB3 Manuel utilisateur

Eiki

Eiki LC-X70 Guide de configuration

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur

Asus

Asus ZenBeam Latte Manuel utilisateur