Effigis CPAT FLEX Manuel utilisateur

v 3.1 / 2021.06.22

Part No. 100-00007-001

CPAT FLEX Operation Manual

(ITX2)

2CPAT FLEX Operation Manual (ITX2)

Contents

1. General Information ............................. 5

1.1 About this Manual ......................................5

1.2 Explanation of Symbols Used ..............................5

1.3 Certication ..........................................5

1.3.1 Tests Specications ................................5

1.3.2 Compliance......................................5

1.3.3 Note ...........................................6

1.4 Technical Support ......................................6

1.5 Calibration ...........................................6

1.6 Efgis Website. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

2. System Components............................. 7

2.1 Initial Verication .......................................7

2.2 ITX2 Optional Accessories ................................8

2.2.1 Vehicle Accessories ................................8

2.3 Features .............................................9

2.4 Physical Overview ......................................9

2.4.1 Front View Buttons and Display .......................9

2.4.2 Power and Data Interface...........................10

2.4.3 Antenna Connector ...............................11

2.4.4 Battery ........................................11

3. Installation .................................... 12

3.1 Using the Vehicle Support Bracket (optional) ..................12

3.1.1 Safety Precautions for Installation.....................12

3.1.2 Installing the Vehicle Support Bracket ..................13

4. Setup ........................................ 14

4.1 IRX1 Setup ..........................................14

4.2 ITX2 Setup ..........................................14

5. Operation ..................................... 15

5.1 LCD Information ......................................15

5.2 Button Functions ......................................15

5.3 Menu Content ........................................16

5.4 Using the ITX2 as a Portable Transmitter .....................19

5.5 Charging the Battery ...................................22

5.6 Using the ITX2 for Autonomous detection ....................22

5.7 Replacing the Battery Pack ..............................23

5.8 Updating the ITX2’s Firmware.............................24

This document provides information proprietary to Efgis and cannot be used or disclosed

without Efgis’ written authorization.

Efgis reserves the right to make changes without notice. Changes affecting the operation

of any component in this manual will be reected in a subsequent revision. Efgis assumes

no responsibility for any omissions or errors that may appear in this document or for any

damages that may result from the use of information contained herein.

CPAT FLEX Operation Manual (ITX2)

First edition (v1.0): April 2014

Second edition (v1.1): September 2015

Third edition (v2.1): April 2021

Fourth edition (v3.1): June 2021

Part No. 100-00007-001

Published by:

Efgis

4101 Molson St., Suite 400

Montreal, Quebec

CANADA H1Y 3L1

Sales and Support Team

1 514 495-0018 | 1 888 495-6577 | cpat@efgis.com

www.cpatex.com

efgis.com

CPAT FLEX Operation Manual (ITX2)

Contents

1. General Information ............................. 5

1.1 About this Manual ......................................5

1.2 Explanation of Symbols Used ..............................5

1.3 Certication ..........................................5

1.3.1 Tests Specications ................................5

1.3.2 Compliance......................................5

1.3.3 Note ...........................................6

1.4 Technical Support ......................................6

1.5 Calibration ...........................................6

1.6 Efgis Website. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

2. System Components............................. 7

2.1 Initial Verication .......................................7

2.2 ITX2 Optional Accessories ................................8

2.2.1 Vehicle Accessories ................................8

2.3 Features .............................................9

2.4 Physical Overview ......................................9

2.4.1 Front View Buttons and Display .......................9

2.4.2 Power and Data Interface...........................10

2.4.3 Antenna Connector ...............................11

2.4.4 Battery ........................................11

3. Installation .................................... 12

3.1 Using the Vehicle Support Bracket (optional) ..................12

3.1.1 Safety Precautions for Installation.....................12

3.1.2 Installing the Vehicle Support Bracket ..................13

4. Setup ........................................ 14

4.1 IRX1 Setup ..........................................14

4.2 ITX2 Setup ..........................................14

5. Operation ..................................... 15

5.1 LCD Information ......................................15

5.2 Button Functions ......................................15

5.3 Menu Content ........................................16

5.4 Using the ITX2 as a Portable Transmitter .....................19

5.5 Charging the Battery ...................................22

5.6 Using the ITX2 for Autonomous detection ....................22

5.7 Replacing the Battery Pack ..............................23

5.8 Updating the ITX2’s Firmware.............................24

4CPAT FLEX Operation Manual (ITX2)

1. General Information

1.1 About this Manual

This manual describes the components, installation and operation of the ITX2.

You will nd important safety information in this manual. It is strongly recommended that

all users read this manual. Use of this product other than for its intended application may

compromise the unit’s safety features.

1.2 Explanation of Symbols Used

The following symbols are used on the ITX2 label and in this Manual:

Symbol Explanation

!Caution. Indicates that operations or procedures, if carried out without caution, may

cause personal injury or damage to the unit.

/Note. Indicates additional information about the product.

1.3 Certications

This section describes the certications the ITX2 complies with.

1.3.1 Tests Specications

FCC 47 CFR Part 15, Subpart B – Verication

FCC 47 CFR Part 15, Subpart C – Intentional radiators

FCC 47 CFR Part 18, Subpart C – Technical Standards

ICES-003/NMB-003 Issue 4 February 2004

ISED RSS-210, Issue 10, Annex B - Devices operating in frequency bands for any application

ISED RSS-GEN, Issue 5 - General Requirements for Compliance of Radio Apparatus

IEC 61326-1 Electrical equipment for measurement, control and laboratory use – EMC

requirements – Part 1: Generic requirements.

1.3.2 Compliance

This Class A digital apparatus complies with Canadian ICES-003/NMB-003.

This Class A digital apparatus also complies with European EN61326-1: 2006.

6. Maintenance .................................. 24

6.1 Cleaning ............................................24

6.2 Preventative Maintenance ...............................24

Appendix A – Specications........................ 24

A.1 Technical ...........................................24

A.2 Electrical and Environmental .............................25

A.3 Physical ............................................25

A.4 Ordering info.........................................25

A.5 ITX2 Transmission Compliance Summary ....................26

Appendix B – Our Services......................... 26

B.1 Customer Support .....................................27

B.1.1 Equipment Return Instructions .......................27

B.2 Limited Product Warranty................................28

B.2.1 Hardware ......................................28

B.2.2 Software.......................................28

B.2.3 Exclusions .....................................28

B.2.4 Refurbished Parts and Prior Testing ...................29

B.2.5 Exclusive Remedies...............................29

B.2.6 Disclaimer .....................................29

Installation diagram .............................. 30

efgis.com

CPAT FLEX Operation Manual (ITX2)

1. General Information

1.1 About this Manual

This manual describes the components, installation and operation of the ITX2.

You will nd important safety information in this manual. It is strongly recommended that

all users read this manual. Use of this product other than for its intended application may

compromise the unit’s safety features.

1.2 Explanation of Symbols Used

The following symbols are used on the ITX2 label and in this Manual:

Symbol Explanation

!Caution. Indicates that operations or procedures, if carried out without caution, may

cause personal injury or damage to the unit.

/Note. Indicates additional information about the product.

1.3 Certications

This section describes the certications the ITX2 complies with.

1.3.1 Tests Specications

FCC 47 CFR Part 15, Subpart B – Verication

FCC 47 CFR Part 15, Subpart C – Intentional radiators

FCC 47 CFR Part 18, Subpart C – Technical Standards

ICES-003/NMB-003 Issue 4 February 2004

ISED RSS-210, Issue 10, Annex B - Devices operating in frequency bands for any application

ISED RSS-GEN, Issue 5 - General Requirements for Compliance of Radio Apparatus

IEC 61326-1 Electrical equipment for measurement, control and laboratory use – EMC

requirements – Part 1: Generic requirements.

1.3.2 Compliance

This Class A digital apparatus complies with Canadian ICES-003/NMB-003.

This Class A digital apparatus also complies with European EN61326-1: 2006.

6. Maintenance .................................. 24

6.1 Cleaning ............................................24

6.2 Preventative Maintenance ...............................24

Appendix A – Specications........................ 24

A.1 Technical ...........................................24

A.2 Electrical and Environmental .............................25

A.3 Physical ............................................25

A.4 Ordering info.........................................25

A.5 ITX2 Transmission Compliance Summary ....................26

Appendix B – Our Services......................... 26

B.1 Customer Support .....................................27

B.1.1 Equipment Return Instructions .......................27

B.2 Limited Product Warranty................................28

B.2.1 Hardware ......................................28

B.2.2 Software.......................................28

B.2.3 Exclusions .....................................28

B.2.4 Refurbished Parts and Prior Testing ...................29

B.2.5 Exclusive Remedies...............................29

B.2.6 Disclaimer .....................................29

Installation diagram .............................. 30

6CPAT FLEX Operation Manual (ITX2)

NOTE

Any modications made to this device that are not approved by Efgis Geo-

Solutions Inc., may void the authority granted to the user by the FCC to operate

this equipment.

1.4 Technical Support

Efgis Technical Support Service is available from Monday through Friday from 9:00 AM to

5:00 PM Eastern Time.

Toll free from U.S. and Canada: + 1 888-495-6577

International: + 1 514-495-0018

Fax questions anytime to: + 1 514-495-4191

cpat@efgis.com

1.5 Calibration

Your ITX2 unit has been calibrated and tested in the factory, and does not need further

calibration before use.

However, if the unit suffers damage and needs repair, it is recommended that the unit be

returned to an authorized Efgis service center where it will be properly recalibrated.

If your company requires regular calibration of all equipment, or requires a calibration

certicate for the ITX2, a calibration service is available through Efgis.

For more information on calibration services, please contact your Efgis representative.

1.6 Efgis Website

Efgis’ website contains product specications, information, press releases, brochures,

downloads and Frequently Asked Questions (FAQ). Please visit our website at:

www.cpatex.com

1.3.3 Note

This device may not cause harmful interference.

This device must accept any interference received, including interference that may

cause undesired operation.

efgis.com

CPAT FLEX Operation Manual (ITX2)

2. System Components

The ITX2 is a portable radio transmitter that continuously transmits a low-power test carrier

signal in the cable upstream band to detect ingress faults. It can be used as a portable nd-

and-x tool, or can be plugged into the ARD4 CPAT FLEX module to automatically locate

ingress impairments while driving in the operator’s territory as part of the technician’s daily

work routine.

This section describes the ITX2 unit in detail, including its accessories, and helps you get

started by explaining its features, how to use its buttons, and its powering and data interfaces.

NOTE

The ITX2 must be used in conjunction with the IRX1 ingress monitoring system

installed in the headend or IRXP Portable Ingress Receiver or IRXD Remote

PHY.

2.1 Initial Verication

Your ITX2 unit is 40% charged, calibrated, and ready to use right out of the box. Upon

reception, visually inspect each item for any damage that may have occurred during shipping.

If you see any signs of physical damage, please contact Efgis:

• Callers from the U.S. and Canada can dial +1 888-495-6577 (toll-free number)

• International callers can dial +1 514-495-0018.

If there are no apparent signs of physical damage, turn on the unit by pressing the red On/

Off button, and make sure the unit boots up properly.

Make sure no items are missing. Your package should contain all the standard items as well

as any accessories you may have ordered. If you ordered the ITX2 portable ingress detection

kit, the following items are included:

• ITX2 transmitter with rubber holster

• Portable antenna

• Belt strap

• AC adapter

• User manual downloadable

1.3.3 Note

This device may not cause harmful interference.

This device must accept any interference received, including interference that may

cause undesired operation.

8CPAT FLEX Operation Manual (ITX2)

Figure 1: Portable antenna, charger and ITX2

If any of the standard accessories are lost or damaged, you can order a replacement for the

ITX2. Please quote the following part numbers when placing an order:

Part No. Accessory Description

110-00005-001 AC adapter

008-00004-001 Replacement battery pack

037-00011-001 Coax cable 48in. UHF to BNC male RG58

111-00036-001 Portable antenna 12po. with BNC @ 6.78 MHz

039-00027-001 Adapter UHF female to UHF female

111-00037-001 Portable antenna 6.5po. with BNC @ 27.12 MHz

111-00044-001 Portable antenna with BNC @ 40.68 MHz

011-00019-001 Belt strap

011-00020-001 ITX2 rubber holster

To place an order, please call Efgis at + 1 888-495-6577 or + 1 514-495-0018

2.2 ITX2 Optional Accessories

2.2.1 Vehicle Accessories

The ITX2 comes with a portable antenna for handheld ingress detection. The ITX2 can also

be operated by the ARD4 CPAT FLEX module, installed in the service vehicle. To do so, the

accessories listed below are required.

efgis.com

CPAT FLEX Operation Manual (ITX2)

Part No. Accessories Description

012-00017-100 Vehicle support bracket

112-00001-100 Vehicle Magnetic-mount Sub-VHF antenna @ 6.78 MHz

112-00008-100 Vehicle Lip-mount Sub-VHF antenna @ 6.78 MHz

112-00010-100 Vehicle Magnetic-mount Sub-VHF antenna @ 27.12 MHz

112-00011-100 Vehicle Lip-mount Sub-VHF antenna @ 27.12 MHz

112-00017-100 Vehicle Magnetic-mount Sub-VHF antenna @ 40.68 MHz

112-00018-100 Vehicle Lip-mount Sub-VHF antenna @ 40.68 MHz

110-00010-001 ITX2 DC adapter

036-00020-001 ITX2 USB Cable

NOTE

Only antennas obtained from Efgis can be used effectively with the ITX2.

Each Efgis antenna has been analyzed and the appropriate compensation

has been designed into the ITX2 for optimal results. Efgis cannot guarantee

proper results with an antenna from any other source.

2.3 Features

The ITX2 is a nd-and-x transmitter for ingress detection that offers many features,

including:

• User-adjustable transmission level

• User-adjustable antenna gain

• Based on Efgis’ CPAT FLEX ingress monitoring system technology

2.4 Physical Overview

2.4.1 Front View Buttons and Display

10 CPAT FLEX Operation Manual (ITX2)

The ITX2 has four front panel buttons used to turn the unit on and off, navigate menus,

conrm modications and toggle transmission on and off.

2.4.2 Power and Data Interface

The ITX2 has two interfaces on the bottom of the unit. The round receptacle is used to

LCD display

On/Off button

Navigation button

Enter

Esc / OFF Tx

USB (A) interface

Charger adapter interface

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Effigis Instrument de mesure

Effigis

Effigis CPAT FLEX ARD4 Manuel utilisateur

Effigis

Effigis CPAT FLEX IRXP Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur