Efergy ELITE Manuel utilisateur

*All values shown in this manual are only examples. Actual figures will vary depending on your consumption.

CT SensorTransmitter

10 / 15 / 20s

ELECTRICITY MONITORING

TRANSMITTER

2. Plug the C T sensors’

jacks into the transmitter

1. O pen and place one

CT sensor around each

mains cable

Do not touch below this level

1. Pull the clasp to open the CT sensor

2. Place the CT sensor around the cable

3. Push the clasp to close securely

Wireless energy

monitor link button

Hold for 2 seconds

history

backward

forward

mode/set

INSTANT MODE

MONITOR SETUP

15 16

Push the mode/set button to change information being displayed from kW to cost

(displayed in $).

Cost and Emission Per Day or Hour Energy Now

The lower part of the screen shows Shows the instant power in kW.

the estimated cost and carbon

emissions per day or hour.

Push the History button to access daily, weekly and monthly stored data. Use the backward

and forward arrow buttons to scroll between dates and compare consumption data.

Press the mode/set button to change the information display from kWh to costs and CO2

emissions.

Historical consumption

information for days,

weeks and months in

kWh, $ and KgCO2

Average information for

days, weeks and months

in kWh, $ and KgCO2

HISTORY MODE

FA S

1817

If I remove the batteries will I lose the information on the display?

The display has an internal memory, so if you need to change or remove the batteries the

information stored on it will not be lost.

How do I reset the display (clear the stored data and start again)?

Press and hold the mode/set and History buttons simultaneously for 2 seconds.

How far does the device transmit?

The transmitter work up to around 230ft/ 40m within the home. The 433MHz range is well

suited for in-home use. This can cover 3 ﬂoors and is also ideal for buildings where electricity

meters are situated outside.

I have dashes (- - - -) showing on the display. What does this mean?

Move the display closer to the transmitter and press the link button. If the dashes remain

on the display this would indicate that the transmitter and receiver are not communicating.

Please contact efergy customer services to help solve the problem, at askjohnny@efergy.ca

The backlight appears to work sometimes and then not others. Is it broken?

No. The backlight is on a timer to save battery life. The display should work at darker periods

during the day when any buttons are pressed. The LED backlight will be activated from 18:00

hours - 6:00 hours.

TECHNICAL INFORMATION

Model Name

Model Number

Frequency

Transmission Time

Transmission Range

Working voltage range

Measuring Current

Carbon Ratio

Elite true power meter

Elite-TPM-NA 1.0

433.5MHz

10, 15 or 20 seconds

230ft - 328ft/ 40m - 70m

110V - 600V

50mA-200A (MAX)

0.50kg.CO2/ kWh

Autres manuels pour ELITE

Table des matières

Autres manuels Efergy Instrument de mesure

Efergy

Efergy Elite Classic Manuel utilisateur

Efergy

Efergy E2 Manuel utilisateur

Efergy

Efergy Energy metering and monitoring Manuel utilisateur

Efergy

Efergy E2 Manuel utilisateur

Efergy

Efergy ELITE Manuel utilisateur

Efergy

Efergy Engage solar Manuel utilisateur

Efergy

Efergy Elite True Power Meter Manuel utilisateur

Efergy

Efergy elite 2.0 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur