12 MV-2504-05--2021 .eeese-air-care.com © Alle rettigheder forbeholdes eeese air care aps MV-2504-05--2021 .eeese-air-care.com © Alle rettigheder forbeholdes eeese air care aps 13
DK DK
Automatisk slukning med indikator for fuld vandbeholder
Enheden går i standbytilstand, når vandbeholderen er fuld, eller hvis vandbeholderen ikke
er installeret korrekt. Når du har tømt beholderen eller installeret vandbeholderen korrekt,
går enheden til den forrige tilstand.
Bortset fra tænd/sluk-knappen er alle andre knapper inaktive.
Hukommelsesfunktion:
A) Indstillinger for augter og timer bevares:
Når stikket tages ud og tilsluttes igen, eller når strømmen vender tilbage efter
enstrømafbrydelse.
B) Augterindstillingen bevares, men timeren annulleres:
Når augteren slukkes og tændes med tænd/sluk-knappen.
C) Augter og timer vender tilbage til fabriksindstillingerne:
Når augteren slukkes med tænd/sluk-knappen, og stikket trækkes ud,
og der tændes igen.
6. Rengøring
Ved regelmæssig brug kan lteret blive tilstoppet med støv og partikler. Derfor bør lteret
rengøres mindst hver anden uge. Følg nedenstående trin:
1Sluk for enheden, og tag stikket ud af stikkontakten
førrengøring.
2
Rengør kabinettet med en blød, tør klud. Hvis enheden er
meget snavset, skal du bruge et mildt rengøringsmiddel.
Aftør augteren med en let fugtig klud. Sprøjt aldrig vand
påenheden.
3
When used regularly , the filter may become clogged with dust and particles. Therefore the filter should
be cleaned at least every two weeks. Follow these steps:
1. Switch the device off and remove the plug from the socket before
cleaning.
2. Clean the housing with soft, dry cloth. If the device is extremely dirty,
use a mild cleaning agent. Wipe the dehumidifier with a slightly damp
cloth. Never spray the device with water.
3. Remove the filter, clean the filter with a vacuum cleaner or soapy
water no hotter than 40℃.
4. Rinse and dry the filter completely before installing back to the
device.
8
Cleaning
1
Product Instructions
Safety Instructions
The dehumidifier is used to remove excessive moisture from the air. The resulting reduction in relative
humidity protects buildings and their contents from the adverse effects of excess humidity.
The environmentally friendly R290 is used as the refrigerant. R290 has no damaging influence on the
ozone layer (ODP), a negligible greenhouse effect (GWP) and is available worldwide. Because of its
efficient energy properties, R290 is highly suitable as a coolant for this application. Special precautions
must be taken into consideration due to the coolant's high flammability.
This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made
by children without supervision.
The unit is designed only for use with R-290(propane) gas as the designated refrigerant.
THE REFRIGERANT LOOP IS SEALED. ONLY A QUALIFIED TECHNICIAN SHOULD ATTEMPT
TO SERVICE!
Do not discharge the refrigerant into the atmosphere.
R-290 (propane) is flammable and heavier than air.
It collects first in low areas but can be circulated by the fans.
If propane gas is present or even suspected, do not allow untrained personnel to attempt to find the
cause.
The propane gas used in the unit has no odor.
The lack of smell does not indicate a lack of escaped gas.
If a leak is detected, immediately evacuate all persons from the store, ventilate the room and contact
the local fire department to advise them that a propane leak has occurred.
Do not let any persons back into the store until the qualified service technician has arrived and that
technician advises that it is safe to return to the store.
No open flames, cigarettes or other possible sources of ignition should be used inside or in the vicinity
of the units.
Component parts are designed for propane and non-incentive and non-sparking. Component parts
shall only be replaced with identical repair parts.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
The appliance shall be disconnected from its power source during maintenance.
Ensure the unit is far away from fire, inflammable, or explosive objects.
Do not use means to accelerate the defrosting process or to clean, other than those recommended
by the manufacture.
Fjern lteret, og rengør det med en støvsuger eller
sæbevand, der ikke er varmere end 40 °C.
4
Skyl og tør lteret helt, før det installeres i enheden igen.
7. Opbevaring
Hvis augteren ikke skal bruges i en længere periode, skal du gøre følgende:
1. Tag stikket ud af stikkontakten, og tøm vandbeholderen. Sørg for, at vandbeholderen
ogaugteren er helt tørre. Dette kan tage et par dage.
2. Rengør luftlteret.
3. Kontrollér, at augteren er i perfekt tilstand, så det er sikkert at tage den i brug igen
efter en længere opbevaringsperiode.
4. Opbevar enheden i passende emballage.
5. Opbevar augteren på et støvfrit sted væk fra direkte sollys. Det anbefales at tildække
den med et stykke plastik.
8. Visning af fejlkoder
Kontakt venligst din lokale forhandler, hvis en af de nedenstående fejlkoder vises.
Vist kode E1 E2
Fejl Fejl i temperatursensor Fejl i fugtighedssensor
Display Blinker hvert 30. sek. Blinker hvert 30. sek.
Aktuel aktivitet
Enheden augter
stadig, men kun i
afrimningstilstand.
Enheden augter stadig,
men kun i kontinuerlig
augtningstilstand.
