Edimax HP-8501 Manuel utilisateur
Copyright©by Edimax Technology Co, LTD. all rights reserved. No part of this publication
may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into
any language or computer language, in any form or by any means, electronic, mechanical,
magnetic, optical, chemical, manual or otherwise, without the prior written permission of this
Company .
This company makes no representations or warranties, either expressed or implied, with
respect to the contents hereof and specifically disclaims any warranties, merchantability or
fitness for any particular purpose. Any software described in this manual is sold or licensed
"as is". Should the programs prove defective following their purchase, the buyer (and not this
company, its distributor, or its dealer) assumes the entire cost of all necessary servicing,
repair, and any incidental or consequential damages resulting from any defect in the software.
Further, this company reserves the right to revise this publication and to make changes from
time to time in the contents hereof without obligation to notify any person of such revision or
changes.
The product you have purchased and the setup screen may appear slightly different from
those shown in this QIG. For more detailed information about this product, please refer to the
User's Manual on the CD-ROM. The software and specifications subject to change without
notice. Please visit our web site www.edimax.com for the update. All right reserved including
all brand and product names mentioned in this manual are trademarks and/or registered
trademarks of their respective holders .
Linux Open Source Code
Certain Edimax products include software code developed by third parties, including
software code subject to the GNU General Public License ("GPL") or GNU Lesser
General Public License ("LGPL"). Please see the GNU (www.gnu.org) and LPGL
(www.gnu.org) Websites to view the terms of eachlicense.
The GPL Code and LGPL Code used in Edimax products are distributed without any
warranty and are subject to the copyrights of their authors. For details, see the GPL
Code and LGPL Code licenses. You can download the firmware-files at
http://www.edimax.com under "Download" page.
1
Index
1. Powerline Networking Installation........................................................................2
1.1 Simple step to install Powerline Networking....................................................2
1.2 Application Block Diagram...............................................................................3
1.2.1 Internet ADSL with one computer via power outlet.......................................3
1.2.2 Online game via power outlet.......................................................................3
1.2.3 Internet ADSL and Home Networking via power outlet.................................4
1.3 Benefits ...........................................................................................................5
1.4 Features..........................................................................................................5
1.5 Package Contents...........................................................................................5
1.6 System Requirements .....................................................................................5
2. Powerline Networking Utility................................................................................6
2.1 Configuration Utility Setup...............................................................................6
2.1.1 Installation of the Utility.................................................................................6
2.2 Windows Configuration Utility..........................................................................7
2.3 User Interface..................................................................................................8
2.3.1 Main Screen .................................................................................................8
2.3.2 Privacy Screen ...........................................................................................13
2.4 Diagnostics Screen........................................................................................15
2.4.1 About Screen..............................................................................................17
2.4.2 Preferences................................................................................................17
2
Congratulations on purchasing Edimax HP-8501 Power line Ethernet Bridge. This
product complies with the HomePlug V1.0 Turbo mode standard which providing up
to 85Mbps data transfer rate. It can compatible with HomePlug V1.0 products.
This product enables you to create a network easily and cost-effectively, it is a good
choice for you to create a new network or rearrangement of the existing network.
1. Powerline Networking Installation
1.1 Simple step to install Powerline Networking
3
1.2 Application Block Diagram
1.2.1 Internet ADSL with one computer via power outlet
1.2.2 Online game via power outlet
4
1.2.3 Internet ADSL and Home Networking via power outlet
5
1.3 Benefits
‧Data transfers at up to 85 Mbps over the household power circuit
‧Ranges of 200 meters
‧No need new wires for Home networking
‧Deliver the benefits of Ethernet without the wiring expense
‧Send even large files between PCs without long waits
‧High-speed Internet and DVD-quality video streaming
‧Fully compliant with IEEE 802.3, IEEE 802.3u
‧Privacy through DES encryption
1.4 Features
‧Be cost competitive
‧Use the home's existing powerline
‧Easy to install
‧Throughout the whole house, just use your power circuit to access the Internet or
PC network
‧Orthogonal Frequency Division Multiplexing for high data reliability in noisy media
conditions
‧Up to 85Mbps data rate on powerline
‧56-bits DES link encryption for security
‧3 LEDs indicate status
1.5 Package Contents
‧HP-8501
‧CD with Multi-language QIG and Utility
‧Quick Installation Guide
‧Category 5 cable
1.6 System Requirements
‧Ethernet device
‧AC power outlet
‧Windows system for encryption setup
6
2. Powerline Networking Utility
Note. The HP-8501 can auto detect the other powerline bridges which plug in the same
power circuit, you don’t need to use this powerline utility except you want to encryption all the
powerline devices as the same group or you can not access the other computers.
Introduction of Configuration Utility
The Configuration Utility for Windows OS (Support Vista 32/64 edition) enables the
user to find Powerline Ethernet devices on the Powerline network; measures data
rate performance, ensures privacy, performs diagnostics and secures Powerline
networks.
2.1 Configuration Utility Setup
2.1.1 Installation of the Utility
Please verify that no other Powerline Management Utilities are installed before
installing this product. If other utilities are installed, uninstall them and restart before
installing this software.
To install, insert the Windows OS Configuration Utility Setup utility CD-ROM into the
computer's CD-ROM drive. The Setup utility shall run automatically. Alternatively this
can also be done manually by double clicking the setup.exe file on the CD. The CD
will launch an installation utility similar to the one shown in Figure 1.
This Utility is designed for Powerline 14M and 85M Ethernet bridges. Click the
Next button to continue.
Figure 1: Install Shield Screen
7
2.2 Windows Configuration Utility
In order to run the utility, double-click the utility icon. Figure 2 shows the main screen
of the configuration utility.
This screen shot shows a Powerline Ethernet device connected as a local device and
other Powerline Ethernet devices as remote devices.
Figure 2: Main Screen with High-Speed Powerline Ethernet device Local
8
2.3 User Interface
2.3.1 Main Screen
The Main screen essentially provides a list of all Powerline Ethernet devices logically
connected to the computer where the utility is running.
The top panel shows all local Powerline Ethernet devices found connected to the
computer's NIC (Network Interface Card). In most cases, only one device will be
seen. In situations where there are more than one device connected, such as a USB
and also an Ethernet device, the user may click to select the one to manage through
and then click the Connect button to its right. The status area above the button
indicates that your PC is connected to that same device. Once connected to the
chosen local device, the utility will automatically scan the
powerline periodically for any other Powerline Ethernet devices. If no local Powerline
Ethernet devices are discovered, the status area above the connect button will
indicate that accordingly.
Figure 3 illustrates the presence of two local devices in the computer.
Figure 3: Multiple Local Device Connection
Autres manuels pour HP-8501
3
Table des matières
Autres manuels Edimax Routeur réseau
Edimax
Edimax Edimax user guide Router Manuel utilisateur
Edimax
Edimax BR-6524n Manuel utilisateur
Edimax
Edimax AR-7186WnA Manuel utilisateur
Edimax
Edimax AR-7167WnA Manuel utilisateur
Edimax
Edimax CV-7438nDM Manuel utilisateur
Edimax
Edimax router Manuel utilisateur
Edimax
Edimax HP-8501 Manuel utilisateur
Edimax
Edimax BR-6004 Manuel utilisateur
Edimax
Edimax BR-6428nS 9dBi Manuel utilisateur
Edimax
Edimax CV-7428nS Manuel utilisateur
Edimax
Edimax EW-7205APS Manuel utilisateur
Edimax
Edimax BR-6258nL Manuel utilisateur
Edimax
Edimax Wireless VPN Broadband Router Manuel utilisateur
Edimax
Edimax AR-7182WnA Manuel utilisateur
Edimax
Edimax APC500 Manuel utilisateur
Edimax
Edimax BR-6228nS Guide d'installation et d'utilisation
Edimax
Edimax BR-6475nD Manuel utilisateur
Edimax
Edimax EW-7416APn v2 Manuel utilisateur
Edimax
Edimax ES-1008PH V2 Manuel utilisateur
Edimax
Edimax EW-7303APn v2 Manuel utilisateur
Manuels Routeur réseau populaires d'autres marques
NETGEAR
NETGEAR FS526T - Switch Manuel utilisateur
Korenix
Korenix JetNet 5710G Series Manuel utilisateur
Automated Logic
Automated Logic ZN551 Manuel du propriétaire
Cisco
Cisco ASR 1000 Series Manuel de l'opérateur
EnGenius
EnGenius ESR-9710 Manuel utilisateur
Cisco
Cisco 805 Series Instructions d'utilisation et de sécurité